View 243658-020_2815511.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

intel ? celeron ? processor up to 1.10 ghz datasheet the intel ? celeron ? processor is designed for uni-processor based value pc desktops and is binary compatible with previous generation intel architecture processors. the celeron processor provides good performance for applications running on advanced operating systems such as microsoft* windows*98, windows nt*, windows* 2000, windows xp* and linux*. this is achieved by integrating the best attributes of intel processors?the dynamic execution performance of the p6 microarchitecture plus the capabilities of mmx? technology?bringing a balanced level of performance to the value pc market segment. the celeron processor offers the dependability you would expect from intel at an exceptional value. systems based on celeron processors also include the latest features to simplify system management and lower the cost of ownership for small business and home environments. available at 1.10 ghz, 1 ghz, 950 mhz, 900 mhz, 850 mhz, 800 mhz, 766 mhz, 733 mhz, 700 mhz, 667 mhz, 633 mhz, 600 mhz, 566 mhz, 533 mhz, 533a mhz, 500 mhz, 466 mhz, 433 mhz, 400 mhz, 366 mhz, 333 mhz, and 300a mhz core frequencies with 128 kb level-two cache (on die); 300 mhz and 266 mhz core frequencies without level-two cache. intel?s latest celeron ? processors in the fc-pga/fc-pga2 package are manufactured using the advanced 0.18 micron technology. binary compatible with applications running on previous members of the intel microprocessor line. dynamic execution microarchitecture. operates on a 100/66 mhz, transaction- oriented system bus. specifically designed for uni-processor based value pc systems, with the capabilities of mmx? technology. power management capabilities. optimized for 32-bit applications running on advanced 32-bit operating systems. uses cost-effective packaging technology. ? single edge processor (s.e.p.) package to maintain compatibility with sc242 (processor core frequencies (mhz): 266, 300, 300a, 333, 366, 400, 433). ? plastic pin grid array (ppga) package (processor core frequencies (mhz): 300a, 333, 366, 400, 433, 466, 500, 533). ? flip-chip pin grid array (fc-pga / fc-pga2) package (processor core frequencies (mhz); 533a, 566, 600, 633, 667, 700, 733, 766, 800, 850, 900, 950); (ghz); 1, 1.10 integrated high-performance 32 kb instruction and data, nonblocking, level- one cache: separate 16 kb instruction and 16 kb data caches. integrated thermal diode. s.e.p. package fc-pga2 package fc-pga package ppga package document number: 243658-020 january 2002
datasheet information in this document is provided in connection with intel ? products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in intel?s terms and conditions of sale for such products, inte l assumes no liability whatsoever, and intel disclaims any express or implied warranty, relating to sale and/or use of intel products including liabil ity or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property righ t. intel products are not intended for use in medical, life saving, or life sustaining applications. intel may make changes to specifications and product descriptions at any time, without notice. designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." int el reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. the intel ? celeron ? processor may contain design defects or errors known as errata which may cause the product to deviate from published specifi- cations. current characterized errata are available on request. contact your local intel sales office or your distributor to obtain the latest specifications and before placing your product o rder. copies of documents which have an ordering number and are referenced in this document, or other intel literature, may be obtain ed by calling 1-800-548-4725 or by visiting intel?s website at http://www.intel.com. intel, celeron, pentium, mmx and the intel logo are trademarks or registered trademarks of intel corporation or its subsidiarie s in the united states and other countries. *other names and brands may be claimed as the property of others. copyright ? 1996?2002, intel corporation
datasheet 3 intel ? celeron ? processor up to 1.10 ghz contents 1.0 introduction................................................................................................................ .......11 1.1 terminology.........................................................................................................11 1.1.1 package terminology.............................................................................12 1.1.2 processor naming convention...............................................................13 1.2 references ..........................................................................................................14 2.0 electrical specifications................................................................................................... .15 2.1 system bus and vref...........................................................................................15 2.2 clock control and low power states..................................................................15 2.2.1 normal state?state 1 ...........................................................................16 2.2.2 autohalt power down state?state 2 .................................................16 2.2.3 stop-grant state?state 3 .....................................................................17 2.2.4 halt/grant snoop state?state 4 ........................................................17 2.2.5 sleep state?state 5..............................................................................17 2.2.6 deep sleep state?state 6 ....................................................................18 2.2.7 clock control..........................................................................................18 2.3 power and ground pins ......................................................................................18 2.3.1 phase lock loop (pll) power...............................................................19 2.4 processor decoupling .........................................................................................19 2.4.1 system bus agtl+ decoupling.............................................................19 2.5 voltage identification ...........................................................................................20 2.6 system bus unused pins....................................................................................21 2.7 processor system bus signal groups ................................................................21 2.7.1 asynchronous vs. synchronous for system bus signals ......................23 2.7.2 system bus frequency select signal (bsel[1:0]).................................23 2.8 test access port (tap) connection....................................................................23 2.9 maximum ratings................................................................................................23 2.10 processor dc specifications...............................................................................24 2.11 agtl+ system bus specifications .....................................................................33 2.12 system bus ac specifications ............................................................................34 3.0 system bus signal simulations........................................................................................52 3.1 system bus clock (bclk) signal quality specifications and measurement guidelines ....................................................................................52 3.2 agtl+ signal quality specifications and measurement guidelines ..................55 3.3 non-agtl+ signal quality specifications and measurement guidelines...........57 3.3.1 overshoot/undershoot guidelines .........................................................57 3.3.2 ringback specification ...........................................................................58 3.3.3 settling limit guideline...........................................................................59 3.4 agtl+ signal quality specifications and measurement guidelines (fc-pga/fc-pga2 packages) ...........................................................................59 3.4.1 overshoot/undershoot guidelines (fc-pga/fc-pga2 packages) .......59 3.4.2 overshoot/undershoot magnitude (fc-pga/fc-pga2 packages) .......59 3.4.3 overshoot/undershoot pulse duration (fc-pga/fc-pga2 packages) ..............................................................................................60 3.4.4 activity factor (fc-pga/fc-pga2 packages) ......................................60
intel ? celeron ? processor up to 1.10 ghz 4 datasheet 3.4.5 reading overshoot/undershoot specification tables (fc-pga/fc-pga2 packages) .............................................................. 61 3.4.6 determining if a system meets the overshoot/undershoot specifications (fc-pga/fc-pga2 packages)....................................... 62 3.5 non-agtl+ signal quality specifications and measurement guidelines........... 64 4.0 thermal specifications and design considerations......................................................... 65 4.1 thermal specifications........................................................................................ 65 4.1.1 thermal diode........................................................................................ 68 5.0 mechanical specifications................................................................................................ 69 5.1 s.e.p. package ................................................................................................... 69 5.1.1 materials information.............................................................................. 69 5.1.2 signal listing (s.e.p. package) ............................................................ 70 5.2 ppga package ................................................................................................... 79 5.2.1 ppga package materials information.................................................... 79 5.2.2 ppga package signal listing ................................................................ 81 5.3 fc-pga/fc-pga2 packages ............................................................................. 92 5.3.1 fc-pga mechanical specifications ....................................................... 92 5.3.2 mechanical specifications (fc-pga2 package) .................................... 94 5.3.2.1 recommended mechanical keep-out zones (fc-pga2 package) ................................................................. 96 5.3.3 fc-pga/fc-pga2 package signal list................................................. 97 5.4 processor markings (ppga/fc-pga/fc-pga2 packages) ............................. 108 5.5 heatsink volumetric keepout zone guidelines................................................. 109 6.0 boxed processor specifications..................................................................................... 110 6.1 mechanical specifications for the boxed intel ? celeron ? processor ................ 110 6.1.1 mechanical specifications for the s.e.p. package............................... 110 6.1.1.1 boxed processor heatsink weight.......................................... 112 6.1.1.2 boxed processor retention mechanism ................................. 112 6.1.2 mechanical specifications for the ppga package............................... 113 6.1.2.1 boxed processor heatsink weight.......................................... 114 6.1.3 mechanical specifications for the fc-pga/fc-pga2 packages......... 114 6.1.3.1 boxed processor heatsink weight.......................................... 115 6.2 thermal specifications...................................................................................... 115 6.2.1 thermal requirements for the boxed intel ? celeron ? processor........ 115 6.2.1.1 boxed processor cooling requirements ................................ 115 6.2.1.2 boxed processor thermal cooling solution clip .................... 117 6.3 electrical requirements for the boxed intel ? celeron ? processor ................... 117 6.3.1 electrical requirements ....................................................................... 117 7.0 processor signal description ......................................................................................... 120 7.1 signal summaries ............................................................................................. 126
datasheet 5 intel ? celeron ? processor up to 1.10 ghz figures 1 clock control state machine...............................................................................16 2 bclk to core logic offset ..................................................................................48 3 bclk*, picclk, and tck generic clock waveform .........................................49 4 system bus valid delay timings ........................................................................49 5 system bus setup and hold timings..................................................................49 6 system bus reset and configuration timings (for the s.e.p. and ppga packages) ................................................................................................50 7 system bus reset and configuration timings (for the fc-pga/fc-pga2 package) ..............................................................................50 8 power-on reset and configuration timings.......................................................51 9 test timings (tap connection) ..........................................................................51 10 test reset timings .............................................................................................51 11 bclk, tck, picclk generic clock waveform at the processor core pins .....53 12 bclk, tck, picclk generic clock waveform at the processor edge fingers .......................................................................................................54 13 low to high agtl+ receiver ringback tolerance.............................................56 14 non-agtl+ overshoot/undershoot, settling limit, and ringback .....................57 15 maximum acceptable agtl+ overshoot/undershoot waveform (fc-pga/fc-pga2 packages) ...........................................................................63 16 non-agtl+ overshoot/undershoot, settling limit, and ringback ....................64 17 processor functional die layout (cpuid 0686h)...............................................67 18 processor functional die layout (up to cpuid 0683h)......................................67 19 processor substrate dimensions (s.e.p. package) ...........................................70 20 processor substrate primary/secondary side dimensions (s.e.p. package)....70 21 package dimensions (ppga package) ..............................................................79 22 ppga package (pin side view)..........................................................................81 23 package dimensions (fc-pga package)...........................................................92 24 package dimensions (fc-pga2 package).........................................................94 25 volumetric keep-out ...........................................................................................96 26 component keep-out .........................................................................................96 27 package dimensions (fc-pga/fc-pga2 packages) ........................................97 28 top side processor markings (ppga package)...............................................108 29 top side processor markings (fc-pga package) ...........................................108 30 top side processor markings (fc-pga2 package) .........................................108 31 retention mechanism for the boxed intel? celeron ? processor in the s.e.p. package .................................................................................................111 32 side view space requirements for the boxed processor in the s.e.p. package ............................................................................................................111 33 front view space requirements for the boxed processor in the s.e.p. package ............................................................................................................112 34 boxed intel ? celeron ? processor in the ppga package..................................113 35 side view space requirements for the boxed processor in the ppga package ............................................................................................................113 36 conceptual drawing of the boxed intel ? celeron ? processor in the 370-pin socket (fc-pga/fc-pga2 packages)................................................114 37 dimensions of mechanical step feature in heatsink base for the fc-pga/fc-pga2 packages ...........................................................................114 38 top view airspace requirements for the boxed processor in the s.e.p. package .................................................................................................115
intel ? celeron ? processor up to 1.10 ghz 6 datasheet 39 side view airspace requirements for the boxed intel ? celeron ? processor in the fc-pga/fc-pga2 and ppga packages .............................. 116 40 volumetric keepout requirements for the boxed fan heatsink...................... 116 41 clip keepout requirements for the 370-pin (top view) ................................... 117 42 boxed processor fan heatsink power cable connector description .............. 118 43 motherboard power header placement for the s.e.p. package ...................... 119 44 motherboard power header placement relative to the 370-pin socket........... 119
datasheet 7 intel ? celeron ? processor up to 1.10 ghz tables 1 processor identification .......................................................................................13 2 voltage identification definition ...........................................................................20 3intel ? celeron ? processor system bus signal groups.......................................22 4 absolute maximum ratings................................................................................24 5 voltage and current specifications .....................................................................25 6 agtl+ signal groups dc specifications............................................................31 7 non-agtl+ signal group dc specifications......................................................32 8 processor agtl+ bus specifications .................................................................33 9 system bus ac specifications (clock) at the processor edge fingers (for s.e.p. package)............................................................................................35 10 system bus ac specifications (clock) at the processor core pins (for both s.e.p. and pga packages) .................................................36 11 system bus ac specifications (set clock)........................................................37 12 valid intel ? celeron ? processor system bus, core frequency..........................38 13 system bus ac specifications (agtl+ signal group) at the processor edge fingers (for s.e.p. package) .....................................................................39 14 system bus ac specifications (agtl+ signal group) at the processor core pins (for s.e.p. package)...........................................................................39 15 processor system bus ac specifications (agtl+ signal group) at the processor core pins (for ppga package)..........................................................40 16 system bus ac specifications (agtl+ signal group) at the processor core pins (for fc-pga/fc-pga2 packages) .....................................................40 17 system bus ac specifications (cmos signal group) at the processor edge fingers (for s.e.p. package) .....................................................................41 18 system bus ac specifications (cmos signal group) at the processor core pins (for both s.e.p., pga, and fc-pga/fc-pga2 packages)................41 19 system bus ac specifications (cmos signal group) .......................................42 20 system bus ac specifications (reset conditions) (for both s.e.p. and ppga packages) ...............................................................42 21 system bus ac specifications (reset conditions) (for the fc-pga/fc-pga2 packages) ............................................................................42 22 system bus ac specifications (apic clock and apic i/o) at the processor edge fingers (for s.e.p. package) ....................................................43 23 system bus ac specifications (apic clock and apic i/o) at the processor core pins (for s.e.p. and pga packages) .......................................44 24 system bus ac specifications (apic clock and apic i/o) ................................45 25 system bus ac specifications (tap connection) at the processor edge fingers (for s.e.p. package) ....................................................................45 26 system bus ac specifications (tap connection) at the processor core pins (for both s.e.p. and ppga packages)...............................................46 27 system bus ac specifications (tap connection) ..............................................47 28 bclk signal quality specifications for simulation at the processor core (for both s.e.p. and ppga packages) ...............................................................52 29 bclk/picclk signal quality specifications for simulation at the processor pins (for the fc-pga/fc-pga2 packages).......................................53 30 bclk signal quality guidelines for edge finger measurement (for the s.e.p. package)......................................................................................54 31 agtl+ signal groups ringback tolerance specifications at the processor core (for both the s.e.p. and ppga packages) ..............................55
intel ? celeron ? processor up to 1.10 ghz 8 datasheet 32 agtl+ signal groups ringback tolerance specifications at the processor pins (for fc-pga/fc-pga2 packages) ........................................... 55 33 agtl+ signal groups ringback tolerance guidelines for edge finger measurement on the s.e.p. package ................................................................. 56 34 signal ringback specifications for non-agtl+ signal simulation at the processor core (s.e.p. and ppga packages)................................................... 58 35 signal ringback guidelines for non-agtl+ signal edge finger measurement (s.e.p. package).......................................................................... 58 36 signal ringback specifications for non-agtl+ signal simulation at the processor pins (fc-pga/fc-pga2 packages).................................................. 58 37 example platform information............................................................................. 61 38 66 mhz agtl+ signal group overshoot/undershoot tolerance at processor pins (fc-pga/fc-pga2 packages).................................................. 62 39 33 mhz cmos signal group overshoot/undershoot tolerance at processor pins (fc-pga/fc-pga2 packages).................................................. 63 40 processor power for the ppga and fc-pga packages .................................... 66 41 intel ? celeron ? processor for the fc-pga2 package thermal design power . 67 42 thermal diode parameters (s.e.p. and ppga packages)................................. 68 43 thermal diode parameters (fc-pga/fc-pga2 packages)............................... 68 44 thermal diode interface...................................................................................... 68 45 s.e.p. package signal listing by pin number.................................................... 71 46 s.e.p. package signal listing by signal name .................................................. 75 47 package dimensions (ppga package) .............................................................. 80 48 information summary (ppga package) ............................................................. 80 49 ppga package signal listing by pin number .................................................... 82 50 ppga package signal listing in order by signal name .................................... 87 51 package dimensions (fc-pga package) .......................................................... 93 52 processor die loading parameters (fc-pga package) .................................... 93 53 package dimensions (fc-pga2 package) ........................................................ 95 54 processor case loading parameters (fc-pga2 package) ............................... 95 55 fc-pga/fc-pga2 signal listing in order by signal name ............................... 98 56 fc-pga/fc-pga2 signal listing in order by pin number ............................... 103 57 boxed processor fan heatsink spatial dimensions for the s.e.p. package ... 112 58 fan heatsink power and signal specifications................................................. 118 59 alphabetical signal reference .......................................................................... 120 60 output signals................................................................................................... 126 61 input signals ..................................................................................................... 127 62 input/output signals (single driver).................................................................. 128 63 input/output signals (multiple driver) ............................................................... 128
datasheet 9 intel ? celeron ? processor up to 1.10 ghz revision history revision date description -020 january 2002 ? added ihs specifications for 900 mhz, 950 mhz, and 1 ghz. ? added 566 mhz specification for cpuid of 068ah.
intel ? celeron ? processor up to 1.10 ghz 10 datasheet this page is intentionally left blank.
datasheet 11 intel ? celeron ? processor up to 1.10 ghz 1.0 introduction the intel ? celeron ? processor is based on the p6 microarchitecture and is optimized for the value pc market segment. the intel celeron processor, like the pentium ? ii processor, features a dynamic execution microarchitecture and executes mmx? technology instructions for enhanced media and communication performance. the intel celeron processor also utilizes multiple low- power states such as autohalt, stop-grant, sleep, and deep sleep to conserve power during idle times. the intel celeron processor is capable of running today?s most common pc applications with up to 4 gb of cacheable memory space. as this processor is intended for value pc systems, it does not provide multiprocessor support. the pentium ii and pentium ? iii processors should be used for multiprocessor system designs. to be cost-effective at both the processor and system level, the intel celeron processor utilizes cost-effective packaging technologies. they are the s.e.p. (single-edge processor) package, the ppga (plastic pin grid array) package, the fc-pga (flip-chip pin grid array) package, and the fc-pga2 (flip-chip pin grid array) package. refer to the intel ? celeron ? processor specification update for the latest packaging and frequency support information (order number 243337). note: this datasheet describes the intel celeron processor for the ppga package, fc-pga/fc-pga2 packages, and the s.e.p. package versions. unless otherwise specified, the information in this document applies to all versions and information on pga packages, refer to both ppga and fc-pga packages. 1.1 terminology in this document, a ?#? symbol after a signal name refers to an active low signal. this means that a signal is in the active state (based on the name of the signal) when driven to a low level. for example, when flush# is low, a flush has been requested. when nmi is high, a nonmaskable interrupt has occurred. in the case of signals where the name does not imply an active state but describes part of a binary sequence (such as address or data ), the ?#? symbol implies that the signal is inverted. for example, d[3:0] = ?hlhl? refers to a hex ?a?, and d[3:0]# = ?lhlh? also refers to a hex ?a? (h= high logic level, l= low logic level). the term ?system bus? refers to the interface between the processor, system core logic (a.k.a. the agpset components), and other bus agents. the system bus is an interface to the processor, memory, and i/o.
12 datasheet intel ? celeron ? processor up to 1.10 ghz 1.1.1 package terminology the following terms are used often in this document and are explained here for clarification: ? processor substrate ?the structure on which passive components (resistors and capacitors) are mounted. ? processor core ?the processor?s execution engine. ? s.e.p. package ?single-edge processor package, which consists of a processor substrate, processor core, and passive components. this package differs from the s.e.c. cartridge as this processor has no external plastic cover, thermal plate, or latch arms. ? ppga package? plastic pin grid array package. the package is a pinned laminated printed circuit board structure. ? fc-pga ? flip-chip pin grid array. the fc-pga uses the same 370-pin zero insertion force socket (pga370) as the ppga. thermal solutions are attached directly to the back of the processor core package without the use of a thermal plate or heat spreader. ? fc-pga2 ? flip chip pin grid array 2. the fc-pg2a uses the same 370-pin zero insertion force socket (pga370) as the ppga. the fc-pga2 package contains an integrated heat spreader that covers the processor die. ? keepout zone - the area on or near a fc-pga/fc-pga2 packaged processor that system designs can not utilize. ? keep-in zone - the area of a fc-pga packaged processor that thermal solutions may utilize. additional terms referred to in this and other related documentation: ? sc242 ?242-contact slot connector. a processor in the s.e.p. package uses this connector to interface with a system board. ? 370-pin socket (pga370)? the zero insertion force (zif) socket in which a processor in the ppga package will use to interface with a system board. ? retention mechanism ?a mechanical assembly which holds the package in the sc242 connector.
datasheet 13 intel ? celeron ? processor up to 1.10 ghz 1.1.2 processor naming convention a letter(s) is added to certain processors (e.g., 533a mhz) when the core frequency alone may not uniquely identify the processor. below is a summary of what each letter means as well as a table listing all the fc-pga/fc-pga2 processors for the pga370 socket. notes: 1. refer to the intel ? celeron ? processor specification update for the exact cpuid for each processor. table 1. processor identification processor core frequency system bus frequency (mhz) cpuid 1 300 mhz 300 mhz 66 065xh 300a mhz 300 mhz 66 066xh 366 mhz 366 mhz 66 066xh 400 mhz 400 mhz 66 066xh 433 mhz 433 mhz 66 066xh 466 mhz 466 mhz 66 066xh 500 mhz 500 mhz 66 066xh 533 mhz 533 mhz 66 066xh 533a mhz 533 mhz 66 068xh 566 mhz 566 mhz 66 068xh 600 mhz 600 mhz 66 068xh 633 mhz 633 mhz 66 068xh 667 mhz 667 mhz 66 068xh 700 mhz 700 mhz 66 068xh 733 mhz 733 mhz 66 068xh 766 mhz 766 mhz 66 068xh 800 mhz 800 mhz 100 068xh 850 mhz 850 mhz 100 068xh 900 mhz 900 mhz 100 068xh 950 mhz 950 mhz 100 068xh 1 ghz 1 ghz 100 068xh 1.10 ghz 1.10 mhz 100 068xh
14 datasheet intel ? celeron ? processor up to 1.10 ghz 1.2 references the reader of this specification should also be familiar with material and concepts presented in the following documents: ? ap-485, intel ? processor identification and the cpuid instruction (order number 241618) 1 ? ap-589, design for emi (order number 243334) 1 ? ap-900, identifying support for streaming simd extensions in the processor and operating system 1 ? ap-905, pentium ? iii processor thermal design guidelines 1 ? ap-907, pentium ? iii processor power distribution guidelines 1 ? intel ? pentium ? iii processor for the pga370 socket at 500 mhz to 933 mhz datasheet (order number 245264) ? intel ? pentium ? iii processor thermal metrology for cpuid 068h family 1 ? intel ? pentium ? iii processor software application development application notes 1 ? intel ? celeron ? processor specification update (order number 243748) ? 370-pin socket (pga370) design guidelines (order number 244410) ? intel ? architecture software developer's manual (order number 243193) ? volume i: basic architecture (order number 243190) ? volume ii: instruction set reference (order number 243191) ? volume iii: system programming guide (order number 243192) ? intel ? 440ex agpset design guide (order number 290637) ? intel ? celeron ? processor with the intel ? 440lx agpset design guide (order number 245088) ? intel ? 440bx agpset design guide (order number 290634) ? intel ? celeron ? processor with the intel ? 440zx-66 agpset design guide (order number 245126) ? intel ? celeron ? processor (ppga) at 466 mhz thermal solutions guidelines (order number 245156) notes: 1. this reference material can be found on the intel developer?s web site located at http://developer.intel.com. 2. for a complete listing of the intel ? celeron ? processor reference material, refer to the intel developer?s web site when this processor is formally launched. the web site is located at http://developer.intel.com/design/celeron/.
datasheet 15 intel ? celeron ? processor up to 1.10 ghz 2.0 electrical specifications 2.1 system bus and v ref celeron processor signals use a variation of the low voltage gunning transceiver logic (gtl) signaling technology. the intel celeron processor system bus specification is similar to the gtl specification, but has been enhanced to provide larger noise margins and reduced ringing. the improvements are accomplished by increasing the termination voltage level and controlling the edge rates. because this specification is different from the standard gtl specification, it is referred to as assisted gunning transceiver logic (agtl+) in this document. the celeron processor varies from the pentium pro processor in its output buffer implementation. the buffers that drive the system bus signals on the celeron processor are actively driven to v cc core for one clock cycle during the low-to-high transition. this improves rise times and reduces overshoot. these signals should still be considered open-drain and require termination to a supply that provides the logic-high signal level. the agtl+ inputs use differential receivers which require a reference signal (v ref ). v ref is used by the receivers to determine if a signal is a logic-high or a logic-low, and is provided to the processor core by either the processor substrate (s.e.p. package) or the motherboard (pga370 socket). local v ref copies should be generated on the motherboard for all other devices on the agtl+ system bus. termination is used to pull the bus up to the high voltage level and to control reflections on the transmission line. the processor may contain termination resistors (s.e.p. package, fc-pga package, and fc-pga2 package) that provide termination for one end of the intel celeron processor system bus. otherwise, this termination must exist on the motherboard. solutions exist for single-ended termination as well, though this implementation changes system design and eliminate backwards compatibility for celeron processors in the ppga package. single-ended termination designs must still provide an agtl+ termination resistor on the motherboard for the reset# signal. the agtl+ bus depends on incident wave switching. therefore timing calculations for agtl+ signals are based on motherboard flight time as opposed to capacitive deratings. analog signal simulation of the intel celeron processor system bus, including trace lengths, is highly recommended when designing a system. see the pentium ? ii processor agtl+ layout guidelines and the pentium ? ii processor i/o buffer models, quad format (electronic form) for details. 2.2 clock control and low power states celeron processors allow the use of autohalt, stop-grant, sleep, and deep sleep states to reduce power consumption by stopping the clock to internal sections of the processor, depending on each particular state. see figure 1 for a visual representation of the intel celeron processor low power states. for the processor to fully realize the low current consumption of the stop-grant, sleep, and deep sleep states, a model specific register (msr) bit must be set. for the msr at 02ah (hex), bit 26 must be set to a ?1? (this is the power on default setting) for the processor to stop all internal clocks during these modes. for more information, see the pentium ? ii processor developer's manual (order number 243502).
16 datasheet intel ? celeron ? processor up to 1.10 ghz 2.2.1 normal state?state 1 this is the normal operating state for the processor. 2.2.2 autohalt power down state?state 2 autohalt is a low power state entered when the processor executes the halt instruction. the processor will transition to the normal state upon the occurrence of smi#, binit#, init#, or lint[1:0] (nmi, intr). reset# will cause the processor to immediately initialize itself. the return from a system management interrupt (smi) handler can be to either normal mode or the autohalt power down state. see the intel architecture software developer's manual, volume iii: system programmer's guide (order number 243192) for more information. flush# will be serviced during the autohalt state, and the processor will return to the autohalt state. the system can generate a stpclk# while the processor is in the autohalt power down state. when the system deasserts the stpclk# interrupt, the processor will return execution to the halt state. figure 1. clock control state machine 2. auto halt power down state bclk running. snoops and interrupts allowed. 4. auto halt power down state bclk running. snoops and interrupts allowed. snoop event occurs snoop event serviced halt instruction and halt bus cycle generated init#, binit#, intr, smi#, reset# snoop event occurs snoop event serviced 1. normal state normal execution. 3. stop grant state bclk running. snoops and interrupts allowed. stpclk# asserted stpclk# deasserted 5. sleep state bclk running. snoops and interrupts allowed. slp# asserted slp# deasserted 6. deep sleep state bclk stopped. no snoops and interrupts allowed. bclk input stopped bclk input restarted stpclk# deasserted and stop grant entered from auto halt.
datasheet 17 intel ? celeron ? processor up to 1.10 ghz 2.2.3 stop-grant state?state 3 the stop-grant state on the processor is entered when the stpclk# signal is asserted. since the agtl+ signal pins receive power from the system bus, these pins should not be driven (allowing the level to return to v tt ) for minimum power drawn by the termination resistors in this state. in addition, all other input pins on the system bus should be driven to the inactive state. binit# will not be serviced while the processor is in stop-grant state. the event will be latched and can be serviced by software upon exit from stop-grant state. flush# will not be serviced during stop-grant state. reset# will cause the processor to immediately initialize itself, but the processor will stay in stop-grant state. a transition back to the normal state will occur with the deassertion of the stpclk# signal. a transition to the halt/grant snoop state will occur when the processor detects a snoop on the system bus (see section 2.2.4 ). a transition to the sleep state (see section 2.2.5 ) will occur with the assertion of the slp# signal. while in the stop-grant state, smi#, init#, and lint[1:0] will be latched by the processor, and only serviced when the processor returns to the normal state. only one occurrence of each event will be recognized upon return to the normal state. 2.2.4 halt/grant snoop state?state 4 the processor will respond to snoop transactions on the celeron processor system bus while in stop-grant state or in autohalt power down state. during a snoop transaction, the processor enters the halt/grant snoop state. the processor will stay in this state until the snoop on the intel celeron processor system bus has been serviced (whether by the processor or another agent on the intel celeron processor system bus). after the snoop is serviced, the processor will return to the stop-grant state or autohalt power down state, as appropriate. 2.2.5 sleep state?state 5 the sleep state is a very low power state in which the processor maintains its context, maintains the phase-locked loop (pll), and has stopped all internal clocks. the sleep state can only be entered from stop-grant state. once in the stop-grant state, the slp# pin can be asserted, causing the processor to enter the sleep state. the slp# pin is not recognized in the normal or autohalt states. snoop events that occur while in sleep state or during a transition into or out of sleep state will cause unpredictable behavior. in the sleep state, the processor is incapable of responding to snoop transactions or latching interrupt signals. no transitions or assertions of signals (with the exception of slp# or reset#) are allowed on the system bus while the processor is in sleep state. any transition on an input signal before the processor has returned to stop-grant state will result in unpredictable behavior. if reset# is driven active while the processor is in the sleep state, and held active as specified in the reset# pin specification, then the processor will reset itself, ignoring the transition through stop-grant state. if reset# is driven active while the processor is in the sleep state, the slp# and stpclk# signals should be deasserted immediately after reset# is asserted to ensure the processor correctly executes the reset sequence.
18 datasheet intel ? celeron ? processor up to 1.10 ghz while in the sleep state, the processor is capable of entering its lowest power state, the deep sleep state, by stopping the bclk input. (see section 2.2.6 .) once in the sleep state, the slp# pin can be deasserted if another asynchronous system bus event occurs. the slp# pin has a minimum assertion of one bclk period. 2.2.6 deep sleep state?state 6 the deep sleep state is the lowest power state the processor can enter while maintaining context. the deep sleep state is entered by stopping the bclk input (after the sleep state was entered from the assertion of the slp# pin). the processor is in deep sleep state immediately after blck is stopped. it is recommended that the blck input be held low during the deep sleep state. stopping of the bclk input lowers the overall current consumption to leakage levels. to re-enter the sleep state, the bclk input must be restarted. a period of 1 ms (to allow for pll stabilization) must occur before the processor can be considered to be in the sleep state. once in the sleep state, the slp# pin can be deasserted to re-enter the stop-grant state. while in deep sleep state, the processor is incapable of responding to snoop transactions or latching interrupt signals. no transitions or assertions of signals are allowed on the system bus while the processor is in deep sleep state. any transition on an input signal before the processor has returned to stop-grant state will result in unpredictable behavior. 2.2.7 clock control bclk provides the clock signal for the processor and on die l2 cache. during autohalt power down and stop-grant states, the processor processes a system bus snoop. the processor does not stop the clock to the l2 cache during autohalt power down or stop-grant states. entrance into the halt/grant snoop state allows the l2 cache to be snooped, similar to the normal state. when the processor is in the sleep or deep sleep states, it does not respond to interrupts or snoop transactions. during the sleep state, the internal clock to the l2 cache is not stopped. during the deep sleep state, the internal clock to the l2 cache is stopped. the internal clock to the l2 cache will be restarted only after the internal clocking mechanism for the processor is stable (i.e., the processor has re-entered sleep state). picclk should not be removed during the autohalt power down or stop-grant states. picclk can be removed during the sleep or deep sleep states. when transitioning from the deep sleep state to the sleep state, picclk must be restarted with bclk. 2.3 power and ground pins there are five pins defined on the s.e.p. package for voltage identification (vid) and four pins on the ppga, fc-pga, and fc-pga2 packages. these pins specify the voltage required by the processor core. these have been added to cleanly support voltage specification variations on current and future celeron processors. for clean on-chip power distribution, intel celeron processors in the s.e.p. package have 27 v cc (power) and 30 v ss (ground) inputs. the 27 v cc pins are further divided to provide the different voltage levels to the components. v cc core inputs for the processor core account for 19 of the v cc pins, while 4 v tt inputs (1.5 v) are used to provide a agtl+ termination voltage to the processor. for only the s.e.p. package, one v cc 5 pin is provided for voltage transient tools. v cc 5 and v cc core must remain electrically separated from each other.
datasheet 19 intel ? celeron ? processor up to 1.10 ghz the ppga package has more power (88) and ground (80) pins than the s.e.p. package. of the power pins, 77 are used for the processor core (v cc core ) and 8 are used as a agtl+ reference voltage (v ref ). the other 3 power pins are v cc 1.5 , v cc 2.5 and v cc cmos and are used for future processor compatibility. fc-pga/fc-pga2 packages have 77 v cc core , 77 ground pins, eight v ref , one v cc 1.5 , one v cc 2.5 , and one v cc cmos . v cc core inputs supply the processor core, including the on-die l2 cache. the v ref inputs are used as the agtl+ reference voltage for the processor. the v cc cmos pin is provided as a feature for future processor support in a flexible design. in such a design, the v cc cmos pin is used to provide the cmos voltage for use by the platform. additionally, 2.5 v must be provided to the v cc 2.5 input and 1.5 v must be provided to the vcc 1.5 input. the processor routes the cmos voltage level through the package that it is compatible with. for example, processors requiring 1.5 v cmos voltage levels route 1.5 v to the v cc cmos output. each power signal, regardless of package, must meet the specifications stated in table 4 . in addition, all v cc core pins must be connected to a voltage island while all v ss pins have to connect to a system ground plane. in addition, the motherboard must implement the v tt pins as a voltage island or large trace. similarly, all v ss pins must be connected to a system ground plane. 2.3.1 phase lock loop (pll) power it is highly critical that phase lock loop power delivery to the processor meets intel?s requirements. a low pass filter is required for power delivery to pins pll1 and pll2. this serves as an isolated, decoupled power source for the internal pll. 2.4 processor decoupling due to the large number of transistors and high internal clock speeds, the processor is capable of generating large average current swings between low and full power states. this causes voltages on power planes to sag below their nominal values if bulk decoupling is not adequate. care must be taken in the board design to ensure that the voltage provided to the processor remains within the specifications listed in table 5 . failure to do so can result in timing violations or a reduced lifetime of the component. 2.4.1 system bus agtl+ decoupling the s.e.p. package and fc-pga/fc-pga2 packages contain high frequency decoupling capacitance on the processor substrate, where the ppga package does not. therefore, celeron processors in the pga packages require high frequency decoupling on the system motherboard. bulk decoupling must be provided on the motherboard for proper agtl+ bus operation for all packages. see ap-585, pentium ? ii processor agtl+ guidelines (order number 243330), ap- 587, pentium ? ii processor power distribution guidelines (order number 243332), and the pentium ? ii processor developer's manual (order number 243502) for more information.
20 datasheet intel ? celeron ? processor up to 1.10 ghz 2.5 voltage identification the processor?s voltage identification (vid) pins can be used to automatically select the v cc core voltage from a compatible voltage regulator. there are five vid pins (vid[4:0]) on the s.e.p. package, while there are only four (vid[3:0]) on the pga packages. this is because there are no celeron processors in the pga package that require more than 2.05 v (see table 2 ). vid pins are not signals, but rather are an open or short circuit to v ss on the processor. the combination of opens and shorts defines the processor core?s required voltage. the vid pins also allow for compatibility with current and future intel celeron processors. note that the ?11111? (all opens) id can be used to detect the absence of a processor core in a given slot (s.e.p. package only), as long as the power supply used does not affect the vid signals. detection logic and pull-ups should not affect vid inputs at the power source (see section 7.0 ). external logic monitoring the vid signals or the voltage regulator may require the vid pins to be pulled-up. if this is the case, the vid pins should be pulled up to a ttl-compatible level with external resistors to the power source of the regulator. the power source chosen must be guaranteed to be stable whenever the voltage regulator?s supply is stable. this will prevent the possibility of the processor supply going above the specified v cc core in the event of a failure in the supply for the vid lines. in the case of a dc-to-dc converter, this can be accomplished by using the input voltage to the converter for the vid line pull-ups. in addition, the power supply must supply the requested voltage or disable itself. notes: 1. 0 = processor pin connected to v ss . 2. 1 = open on processor; may be pulled up to ttl v ih on motherboard. 3. the celeron processor core uses a 2.0 v power source. 4. vid4 applies only to the s.e.p. package. vid[3:0] applies to both s.e.p. and pga packages. table 2. voltage identification definition vid4 (s.e.p.p. only) vid3 vid2 vid1 vid0 v cc core 01111 1.30 01110 1.35 01101 1.40 01100 1.45 01011 1.50 01010 1.55 01001 1.60 01000 1.65 00111 1.70 00110 1.75 00101 1.80 00100 1.85 00011 1.90 00010 1.95 00001 2.00 00000 2.05 11111no core 4 11110 2.1 4
datasheet 21 intel ? celeron ? processor up to 1.10 ghz 2.6 system bus unused pins all reserved pins must remain unconnected. connection of these pins to v cc core , v ss , or to any other signal (including each other) can result in component malfunction or incompatibility with future celeron processor products. see section 5.0 for a pin listing of the processor and the location of each reserved pin. for intel celeron processors in the s.e.p. package, the testhi pin must be at a logic-high level when the core power supply comes up. for more information, please refer to erratum c26 of the intel ? celeron ? processor specification update (order number 243748). also note that the testhi signal is not available on intel celeron processors in the pga package. picclk must be driven with a valid clock input and the picd[1:0] lines must be pulled-up to 2.5 v even when the apic will not be used. a separate pull-up resistor must be provided for each picd line. for reliable operation, always connect unused inputs or bi-directional signals to their deasserted signal level. the pull-up or pull-down resistor value is system dependent and should be chosen such that the logic-high (v ih ) and logic-low (v il ) requirements are met. for the s.e.p. package, unused agtl+ inputs should not be connected as the package substrate has termination resistors. on the other hand, the pga packages do not have agtl+ termination in their package and must have any unused agtl+ inputs terminated through a pull-up resistor. for designs that intend to only support the fc-pga/fc-pga2 processors, unused agtl+ inputs will be terminated by the processor?s on-die termination resistors and, thus, do not need to be terminated on the motherboard. however, the reset pin should always be terminated on the motherboard. for unused cmos inputs, active-low signals should be connected through a pull-up resistor to meet v ih requirements and active-high signals should be connected through a pull-down resistor to meet v il requirements. unused cmos outputs can be left unconnected. a resistor must be used when tying bi-directional signals to power or ground. for any signal pulled to either power or ground, a resistor will allow for system testability. 2.7 processor system bus signal groups to simplify the following discussion, the celeron processor system bus signals have been combined into groups by buffer type. all celeron processor system bus outputs are open drain and require a high-level source provided externally by the termination or pull-up resistor. agtl+ input signals have differential input buffers, which use v ref as a reference signal. agtl+ output signals require termination to 1.5 v. in this document, the term "agtl+ input" refers to the agtl+ input group as well as the agtl+ i/o group when receiving. similarly, "agtl+ output" refers to the agtl+ output group as well as the agtl+ i/o group when driving. emi pins (s.e.p. package only) should be connected to motherboard ground and/or to chassis ground through zero ohm (0 ? ) resistors. the zero ohm resistors should be placed in close proximity to the sc242 connector. the path to chassis ground should be short in length and have a low impedance. the pwrgood, bclk, and picclk inputs can each be driven from ground to 2.5 v. other cmos inputs (a20m#, ignne#, init#, lint0/intr, lint1/nmi, preq#, smi, slp#, and stpclk#) must be pulled up to v cc cmos . in addition, the cmos, apic, and tap outputs are
22 datasheet intel ? celeron ? processor up to 1.10 ghz open drain and should be pulled high to v cc cmos . this ensures not only correct operation for current intel celeron processors, but compatibility for future intel celeron processor products as well. the groups and the signals contained within each group are shown in table 3 . refer to section 7.0 for descriptions of these signals. notes: 1. see section 7.0 for information on the pwrgood signal. 2. see section 7.0 for information on the slp# signal. 3. see section 7.0 for information on the thermtrip# signal. 4. these signals are specified for 2.5 v operation for s.e.p.p. and ppga packages; they are specified at 1.5v operation for the fc-pga/fc-pga2 packages. 5. v cc core is the power supply for the processor core. vid[4:0] and vid[3:0] are described in section 2.0 . v tt is used to terminate the system bus and generate v ref on the processor substrate. v ss is system ground. v cc 5 is not connected to the celeron processor. this supply is used for voltage transient tools. slotocc# is described in section 7.0 . bsel is described in section 2.7.2 and section 7.0 . emi pins are described in section 7.0 . v cc l2 is a pentium ? ii processor reserved signal provided to maintain compatibility with the pentium ? ii processor and may be left as a no-connect for ?intel celeron processor-only? designs. 6. only applies to intel celeron processors in the s.e.p. package. 7. only applies to intel celeron processors in the ppga and fc-pga/fc-pga2 packages. 8. the br0# pin is the only breq# signal that is bidirectional. see section 7.0 for more information. 9. these signals are specified for 2.5 v operation. 10.bsel1 is not used in celeron processors. 11.reset# must always be terminated to v tt on the motherboard for pga packages. on-die termination is not provided for this signal on fc-pga/fc-pga2 packages. 12.for the fc-pga/fc-pga2 packages, this signal is used to control the value of the processor on-die termination resistance. refer to the specific platform design guide for the recommended pull-down resistor value. 13.only applies to intel celeron processors in the fc-pga/fc-pga2 packages. 14.s.e.p. package and fc-pga/fc-pga2 packages. table 3. intel ? celeron ? processor system bus signal groups group name signals agtl+ input bpri#, defer#, reset# 11 , rs[2:0]#, trdy# agtl+ output prdy# agtl+ i/o a[31:3]#, ads#, bnr#, bp[3:2]#, bpm[1:0]#, br0# 8 , d[63:0]#, dbsy#, drdy#, hit#, hitm#, lock#, req[4:0]#, cmos input 4 a20m#, flush#, ignne#, init#, lint0/intr, lint1/nmi, preq#, smi#, slp# 2 , stpclk# cmos input pwrgood 1,9 cmos output 4 ferr#, ierr#, thermtrip# 3 system bus clock bclk 9 apic clock picclk 9 apic i/o 4 picd[1:0] tap input 4 tck, tdi, tms, trst# tap output 4 tdo power/other 5 cpupres# 7 , edgctrl 7 , emi 6 , pll[2:1] 7 , slotocc# 6 , thermdp, thermdn, v cc 1.5 7 , v cc 2.5 7 , v cc l2 5 , v cc 5 6 , v cc cmos 7 , v cc core , v core det 7 , vid[3:0] 7 , vid[4:0] 6 , v ref [7:0] 7 , v ss , v tt 14 , rttctrl 12 , bsel[1:0] 10 , slewctrl 13
datasheet 23 intel ? celeron ? processor up to 1.10 ghz 2.7.1 asynchronous vs. synchronous for system bus signals all agtl+ signals are synchronous to bclk. all of the cmos, apic, and tap signals can be applied asynchronously to bclk. all apic signals are synchronous to picclk. all tap signals are synchronous to tck. 2.7.2 system bus frequency select signal (bsel[1:0]) the bsel pins have two functions. first, they can act as outputs and can be used by an external clock generator to select the proper system bus frequency. second, they can act as an inputs and can be used by a system bios to detect and report the processor core frequency. see the intel ? celeron ? processor with the intel ? 440zx-66 agpset design guide (order number 245126) for an example implementation of bsel. bsel0 is 3.3 v tolerant for the s.e.p. package, while it is 2.5 v tolerant on the ppga package. a logic-low on bsel0 is defined as 66 mhz. on the fc-pga/fc-pga2 packages a logic low on both bsel0 and bsel1 are defined as 66 mhz and are 3.3v tolerant. 2.8 test access port (tap) connection due to the voltage levels supported by other components in the test access port (tap) logic, it is recommended that the celeron processor be first in the tap chain and followed by any other components within the system. a translation buffer should be used to connect to the rest of the chain unless one of the other components is capable of accepting a vcc cmos (1.5v or 2.5 v) input. similar considerations must be made for tck, tms, and trst#. two copies of each signal may be required with each driving a different voltage level. a debug port may be placed at the start and end of the tap chain with the tdi of the first component coming from the debug port and the tdo from the last component going to the debug port. 2.9 maximum ratings table 4 contains the celeron processor stress ratings only. functional operation at the absolute maximum and minimum is not implied nor guaranteed. the processor should not receive a clock while subjected to these conditions. functional operating conditions are given in the ac and dc tables. extended exposure to the maximum ratings may affect device reliability. furthermore, although the processor contains protective circuitry to resist damage from static electric discharge, one should always take precautions to avoid high static voltages or electric fields.
24 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. operating voltage is the voltage to which the component is designed to operate. see ta b l e 5 . 2. this rating applies to the v cc core , v cc 5 , and any input (except as noted below) to the processor. 3. parameter applies to cmos, apic, and tap bus signal groups only. 4. the electrical and mechanical integrity of the processor edge fingers are specified to last for 50 insertion/ extraction cycles. 5. s.e.p. package only 6. pga packages only 7. input voltage can never exceed v ss + 2.8 volts. 8. input voltage can never go below v tt - 2.18 volts. 9. parameter applies to cmos (except bclk, picclk, and pwrgood), apic, and tap bus signal groups only for vincmos on the fc-pga/fc-pga2 packages only. 10.parameter applies to cmos signals bclk, picclk, and pwrgood for vincmos1.5 on fc-pga/ fc-pga2 package only. 2.10 processor dc specifications the processor dc specifications in this section are defined for the celeron processor. see section 7.0 for signal definitions and section 5.0 for signal listings. most of the signals on the intel celeron processor system bus are in the agtl+ signal group. these signals are specified to be terminated to 1.5 v. the dc specifications for these signals are listed in table 6 . to allow connection with other devices, the clock, cmos, apic, and tap signals are designed to interface at non-agtl+ levels. the dc specifications for these pins are listed in table 7 . table 5 through table 8 list the dc specifications for intel celeron processors operating at 66 mhz intel celeron processor system bus frequencies. specifications are valid only while meeting specifications for case temperature, clock frequency, and input voltages. care should be taken to read all notes associated with each parameter. table 4. absolute maximum ratings symbol parameter min max unit notes t storage processor storage temperature ?40 85 c v cc (all) any processor supply voltage with respect to v ss ? ppga and s.e.p.p. ?0.5 operating voltage + 1.0 v1, 2 ? fc-pga/fc-pga2 ?0.5 2.1 v vinagtl+ agtl+ buffer dc input voltage with respect to v ss ? ppga and s.e.p.p. ?0.3 v cc core + 0.7 v ?fc-pga/fc-pga2 v tt - 2.18 2.18 v 7, 8 vincmos cmos buffer dc input voltage with respect to v ss ? ppga and s.e.p.p. -0.3 3.3 v 3 ?fc-pga/fc-pga2 v tt - 2.18 -0.58 2.18 3.18 v v 7, 8, 9 10 i vid max vid pin current 5 ma i slotocc # max slotocc# pin current 5 ma 5 i cpupres # max cpupres# pin current 5 ma 6 mech max edge fingers 5 mechanical integrity of processor edge fingers 50 insertions/ extractions 4, 5
datasheet 25 intel ? celeron ? processor up to 1.10 ghz table 5. voltage and current specifications (sheet 1 of 5) symbol parameter processor min typ max unit notes core freq cpuid v cc core v cc for processor core 266 mhz 0650h ? 2.00 ?v 2, 3, 4 0651h 2.00 2, 3, 4 300 mhz 0650h 2.00 2, 3, 4 0651h 2.00 2, 3, 4 300a mhz 0660h 2.00 2, 3, 4 0665h 2.00 2, 3, 4 333 mhz 0660h 2.00 2, 3, 4 0665h 2.00 2, 3, 4 366 mhz 0660h 2.00 2, 3, 4 0665h 2.00 2, 3, 4 400 mhz 0660h 2.00 2, 3, 4 0665h 2.00 2, 3, 4 433 mhz 0660h 2.00 2, 3, 4 0665h 2.00 2, 3, 4 466 mhz 0665h 2.00 2, 3, 4 500 mhz 0665h 2.00 2, 3, 4 533 mhz 0665h 2.00 2, 3, 4 533a mhz 0683h 1.50 2, 3, 4 0686h 1.70 2, 3, 4 566 mhz 0683h 1.50 2, 3, 4 0686h 1.70 2, 3, 4 068ah 1.75 2, 3, 20, 25 600 mhz 0683h 1.50 2, 3, 4 0686h 1.70 2, 3, 4 068ah 1.75 2, 3, 20, 25 633 mhz 0683h 1.65 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 667 mhz 0683h 1.65 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 700 mhz 0683h 1.65 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 733 mhz 0683h 1.65 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 766 mhz 0683h 1.65 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20
26 datasheet intel ? celeron ? processor up to 1.10 ghz v cc core v cc for processor core 800 mhz 0683h ? 1.65 ?v 2, 3, 20 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 850 mhz ?? ? 0686h 1.70 2, 3, 20 068ah 1.75 2, 3, 20 900 mhz ?? ? ?? ? 068ah 1.75 2, 3, 20 950 mhz ?? ? ?? ? 068ah 1.75 2, 3, 20 1ghz ?? ? ?? ? 068ah 1.75 2, 3, 20 1.10 ghz ?? ? ?? ? 068ah 1.75 2, 3, 20 v ref 19 agtl+ input reference voltage ?? 2 / 3 v tt ? 2% 2 / 3 v tt + 2% v 2%, 11 v cc 1.5 16 static agtl+ bus termination voltage ? ? 1.455 1.50 1.545 v 1.5 3% transient agtl+ bus termination voltage ? ? 1.365 1.50 1.365 v 1.5 3% v cc 2.5 18 v cc for v cc cmos ? ? 2.375 2.5 2.625 v 2.5 5% v tt agtl+ bus termination voltage ? ? 1.365 1.50 1.635 v 1.5 9% 5 baseboard tolerance, static processor core voltage static tolerance level at sc242 pins ? ? ?0.070 ? 0.100 v 6 baseboard tolerance, transient processor core voltage transient tolerance level at sc242 pins ? ? ?0.120 ? 0.120 v 6 v cc core tolerance, static processor core voltage static tolerance level at: ? sc242 edge fingers ? ? ?0.085 ? 0.100 v 7 ? ppga processor pins ? ? -0.089 ? 0.100 v 8 ? fc-pga/ fc-pga2 processor pins ? ? -0.080 ? 0.040 v 17 table 5. voltage and current specifications (sheet 2 of 5) symbol parameter processor min typ max unit notes core freq cpuid
datasheet 27 intel ? celeron ? processor up to 1.10 ghz v cc core tolerance, transient processor core voltage transient tolerance level at: ? sc242 edge fingers ? ? ?0.140 ? 0.140 v 7 ?ppga processor pins ? ? -0.144 ? 0.144 v 8 ?fc-pga/ fc-pga2 processor pins ? ? ? ? -0.130 -0.110 ? 0.080 0.080 v 17 24 i cc core i cc for processor core 266 mhz ? ? 8.2 a 9, 10 300 mhz ? 9.3 9, 10 300a mhz ? 9.3 9, 10 333 mhz ? 10.1 9, 10 366 mhz ? 11.2 9, 10 400 mhz ? 12.2 9, 10 433 mhz ? 12.6 9, 10 466 mhz ? 13.4 9, 10 500 mhz ? 14.2 9, 10 533 mhz ? 14.9 9, 10 533a mhz ? 11.4 9, 10 566 mhz ? 11.9 9, 10 068ah 12.1 9, 10, 25 600 mhz 0686h 12.0 9, 10 068ah 12.6 9, 10, 25 633 mhz 0686h 12.7 9, 10 068ah 13.0 9, 10 667 mhz 0686h 13.3 9, 10 068ah 13.9 9, 10 700 mhz 0686h 14.0 9, 10 068ah 14.8 9, 10 733 mhz 0686h 14.6 9, 10 068ah 15.4 9, 10 766 mhz 0686h 15.5 9, 10 068ah 16.0 9, 10 800 mhz 0686h 16.0 9, 10 068ah 16.6 9, 10 850 mhz 0686h 16.2 9, 10 068ah 17.3 9, 10 900 mhz 068ah 18.4 9, 10 950 mhz 068ah 19.4 9, 10 1 ghz 068ah 20.2 9, 10 1.10 ghz 068ah 22.6 9, 10 i vtt termination voltage supply current ????2.7a11 table 5. voltage and current specifications (sheet 3 of 5) symbol parameter processor min typ max unit notes core freq cpuid
28 datasheet intel ? celeron ? processor up to 1.10 ghz i sgnt i cc stop-grant for processor core 266 mhz ??? 1.12 a12 300 mhz 1.15 300a mhz 1.15 333 mhz 1.18 366 mhz 1.21 400 mhz 1.25 433 mhz 1.30 466 mhz 1.35 500 mhz 1.43 533 mhz 1.52 533a mhz 2.5 566 mhz 6.9 21 600 mhz 6.9 21 633 mhz 6.9 21 667 mhz 6.9 21 700 mhz 6.9 21 733 mhz 6.9 21 766 mhz 6.9 21 800 mhz 6.9 21 850 mhz 6.9 21 900 mhz 6.9 21 950 mhz 6.9 21 1ghz 6.9 21 1.10 ghz 6.9 21 table 5. voltage and current specifications (sheet 4 of 5) symbol parameter processor min typ max unit notes core freq cpuid
datasheet 29 intel ? celeron ? processor up to 1.10 ghz i slp i cc sleep for processor core 266 mhz ??? 0.90 a 300 mhz 0.94 300a mhz 0.94 333 mhz 0.96 366 mhz 0.97 400 mhz 0.99 433 mhz 1.01 466 mhz 1.03 500 mhz 1.09 533 mhz 1.16 533a mhz 2.5 566 mhz 6.6 22 600 mhz 6.9 22 633 mhz 6.9 22 667 mhz 6.9 22 700 mhz 6.9 22 733 mhz 6.9 22 766 mhz 6.9 22 800 mhz 6.9 22 850 mhz 6.9 22 900 mhz 6.9 22 950 mhz 6.9 22 1ghz 6.9 22 1.10 ghz 6.9 22 i dslp i cc deep sleep for processor core: ? s.e.p.p and ppga ????0.90a ?fc-pga/ fc-pga2 ????6.6 23 i cc cmos i cc for v cc cmos ? s.e.p.p and ppga ????500ma ?fc-pga/ fc-pga2 ????250ma di cc core /dt power supply current slew rate ? s.e.p.p ? ? ? ? 20 a/s 13, 14, 15 ? ppga and fc-pga/ fc-pga2 ? ? ? ? 240 a/s 13, 14 di cc vtt /dt termination current slew rate ????8a/s see table 8 , table 20 , table 22 table 5. voltage and current specifications (sheet 5 of 5) symbol parameter processor min typ max unit notes core freq cpuid
30 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. v cc core and i cc core supply the processor core. 3. these voltages are targets only. a variable voltage source should exist on systems in the event that a different voltage is required. 4. use the typical voltage specification with the tolerance specifications to provide correct voltage regulation to the processor. 5. v tt must be held to 1.5 v 9%. it is recommended that v tt be held to 1.5 v 3% while the celeron ? processor system bus is idle. this is measured at the processor edge fingers. 6. these are the tolerance requirements, across a 20 mhz bandwidth, at the sc242 connector pin on the bottom side of the baseboard. the requirements at the sc242 connector pins account for voltage drops (and impedance discontinuities) across the connector, processor edge fingers, and to the processor core. v cc core must return to within the static voltage specification within 100 s after a transient event. 7. these are the tolerance requirements, across a 20 mhz bandwidth, at the processor edge fingers. the requirements at the processor edge fingers account for voltage drops (and impedance discontinuities) at the processor edge fingers and to the processor core. v cc core must return to within the static voltage specification within 100 s after a transient event. 8. these are the tolerance requirements, across a 20 mhz bandwidth, at the top of the ppga package. v cc core must return to within the static voltage specification within 100 s after a transient event. 9. max i cc core measurements are measured at v cc core max voltage (v cc core_typ + maximum static tolerance), under maximum signal loading conditions. 10.voltage regulators may be designed with a minimum equivalent internal resistance to ensure that the output voltage, at maximum current output, is no greater than the nominal (i.e., typical) voltage level of v cc core (v cc core_typ ). in this case, the maximum current level for the regulator, i cc core_reg , can be reduced from the specified maximum current i cc core_max and is calculated by the equation: i cc core_reg = i cc core_max v cc core_typ /(v cc core_typ + v cc core tolerance, transient) 11.the current specified is the current required for a single intel celeron processor. a similar amount of current is drawn through the termination resistors on the opposite end of the agtl+ bus, unless single-ended termination is used (see section 2.1 ). 12.the current specified is also for autohalt state. 13.maximum values are specified by design/characterization at nominal v cc core . 14.based on simulation and averaged over the duration of any change in current. use to compute the maximum inductance tolerable and reaction time of the voltage regulator. this parameter is not tested. 15.di cc /dt specifications are measured and specified at the sc242 connector pins. 16.fc-pga/fc-pga2 packages only 17.these are the tolerance requirements across a 20 mhz bandwidth at the fc-pga/fc-pga2 socket pins on the solder side of the motherboard. v cc core must return to within the static voltage specification within 100 s after a transient event. 18.pga only 19.s.e.p package and fc-pga/fc-pga2 packages only 20.these processors implement independent v tt and v cc core power planes. 21.for processors with cpuid of 0686h, the i sgnt is 2.5 a. 22.for processors with cpuid of 0686h, the i slp is 2.5 a. 23.for processors with cpuid of 0686h, the i dslp is 2.2 a. 24.this specification is applicable only for processor frequencies of 933 mhz and above. 25.this intel ? celeron ? processor is a telecommunications and embedded group (tseg) and embedded intel architecture division (eid) product only.
datasheet 31 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies and cache sizes. 2. v ih and v oh for the intel celeron processor may experience excursions of up to 200 mv above v tt for a single system bus clock. however, input signal drivers must comply with the signal quality specifications in section 3.0 . 3. minimum and maximum v tt are given in table 8 . 4. parameter correlated to measurement into a 25 ? resistor terminated to 1.5 v. 5. i oh for the intel celeron processor may experience excursions of up to 12 ma for a single system bus clock. 6. (0 v in 2.0 v +5%) for s.e.p package and ppga package; (0 v in 1.5v +3%) for fc-pga/fc-pga2 packages. 7. (0 v out 2.0 v +5%) for s.e.p package and ppga package; (0 v out 1.5v +3%) for fc-pga/ fc-pga2 packages. 8. refer to the i/o buffer models for iv characteristics. 9. steady state input voltage must not be above v ss + 1.65 v or below v tt - 1.65 v. table 6. agtl+ signal groups dc specifications symbol parameter min max unit notes v il input low voltage ? s.e.p.p and ppga ?0.3 0.82 v ? fc-pga/fc-pga2 ?0.150 v ref ? 0.200 v 9 v ih input high voltage ? s.e.p.p and ppga 1.22 v tt v2, 3 ?fc-pga/fc-pga2 v ref + 0.200 v tt v2, 3 r on buffer on resistance 16.67 ? 8 i l leakage current for inputs, outputs, and i/o 100 a 6, 7
32 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. parameter measured at 14 ma (for use with ttl inputs) for s.e.p package and ppga package. it is 9 ma for fc-pga/fc-pga2 packages. 3. (0 v in 2.5 v +5%) for ppga package and s.e.p package only. 4. (0 v out 2.5 v +5%) for ppga package and s.e.p package only. 5. (0 v in 1.5v +3%) for fc-pga/fc-pga2 packages only. 6. (0 v out 1.5v +3%) for fc-pga/fc-pga2 packages only. 7. applies to non-agtl+ signals bclk, picclk, and pwrgood for fc-pga/fc-pga2 packages only. 8. applies to non-agtl+ signals except bclk, picclk, and pwrgood for fc-pga/fc-pga2 packages only. 9. these values are specified at the processor pins for fc-pga/fc-pga2 packages only. 10.s.e.p. package and ppga package only. table 7. non-agtl+ signal group dc specifications symbol parameter min max unit notes v il input low voltage ?0.3 0.7 v 10 v ih input high voltage 1.7 2.625 v 2.5 v +5% maximum, note 10 v il1.5 input low voltage ?0.150 v ref - 0.200 v 8, 9 v il2.5 input low voltage -0.58 0.700 v 7, 9 v ih1.5 input high voltage v ref + 0.200 v tt v5, 8, 9 v ih2.5 input high voltage 2.0 3.18 v 7, 9 v ol output low voltage 0.4 v 2 v oh output high voltage ? s.e.p.p and ppga n/a 2.625 v all outputs are open- drain to 2.5 v +5% ?fc-pga/fc-pga2 v tt v6, 8, 9 i ol output low current ? s.e.p.p and ppga 14 ma ? fc-pga/fc-pga2 9 ma 9 i l leakage current for inputs, outputs, and i/o 100 a 3, 4, 5, 6
datasheet 33 intel ? celeron ? processor up to 1.10 ghz 2.11 agtl+ system bus specifications it is recommended that the agtl+ bus be routed in a daisy-chain fashion with termination resistors to v tt at each end of the signal trace. these termination resistors are placed electrically between the ends of the signal traces and the v tt voltage supply and generally are chosen to approximate the substrate impedance. the valid high and low levels are determined by the input buffers using a reference voltage called v ref . single ended termination may be possible if trace lengths are tightly controlled, see the intel ? 440ex agpset design guide (order number 290637) or the intel ? celeron ? processor (ppga) with the intel ? 440lx agpset design guide (order number 245088) for more information. table 8 below lists the nominal specification for the agtl+ termination voltage (v tt ). the agtl+ reference voltage (v ref ) is generated on the processor substrate (s.e.p. package only) for the processor core, but should be set to 2 / 3 v tt for other agtl+ logic using a voltage divider on the motherboard. it is important that the motherboard impedance be specified and held to: ? 20% tolerance (s.e.e.p. and ppga) ? 15% tolerance (fc-pga/fc-pga2) it is also important that the intrinsic trace capacitance for the agtl+ signal group traces is known and well-controlled. for more details on agtl+, see the pentium ? ii processor developer's manual (order number 243502) and ap-585, pentium ? ii processor agtl+ guidelines (order number 243330). notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. v tt must be held to 1.5 v 9%; di cc vtt /dt is specified in table 5 . it is recommended that v tt be held to 1.5 v 3% while the intel celeron processor system bus is idle. this is measured at the processor edge fingers. 3. v ref is generated on the processor substrate to be 2 / 3 v tt nominally with the s.e.p. package. it must be created on the motherboard for processors in the ppga package. 4. v tt and vcc 1.5 must be held to 1.5v 9%. it is required that v tt and vcc 1.5 be held to 1.5 v 3% while the processor system bus is idle (static condition). this is measured at the pga370 socket pins on the bottom side of the baseboard. 5. the value of the on-die r tt is determined by the resistor value measured by the rttctrl signal pin. the on-die r tt tolerance is 15% based on the rttctrl resistor pull-down of 1%. see section 7.0 for more details on the rttctrl signal. refer to the recommendation guidelines for the specific chipset/processor combination. 6. v ref is generated on the motherboard and should be 2/3 v tt 2% nominally. insure that there is adequate v ref decoupling on the motherboard. table 8. processor agtl+ bus specifications symbol parameter min typ max units notes v tt bus termination voltage ? s.e.p.p and ppga 1.365 1.50 1.635 v 1.5 v 9% 2 ?fc-pga/fc-pga2 1.50 v 4 r tt termination resistor ? s.e.p.p and ppga 56 ? 5% ?fc-pga/fc-pga2 (on die r tt ) 40 130 ? 5 v ref bus reference voltage ? s.e.p.p and ppga 2 / 3 v tt v 2% 3 ? fc-pga/fc-pga2 0.950 2/3 v tt 1.05 v 6
34 datasheet intel ? celeron ? processor up to 1.10 ghz 2.12 system bus ac specifications the celeron processor system bus timings specified in this section are defined at the intel celeron processor edge fingers and the processor core pins. timings specified at the processor edge fingers only apply to the s.e.p. package and timings given at the processor core pins apply to all s.e.p. package and pga packages. unless otherwise specified, timings are tested at the processor core during manufacturing. timings at the processor edge fingers are specified by design characterization. see section 7.0 for the intel celeron processor signal definitions. note that at 66 mhz system bus operation, the intel celeron processor timings at the processor edge fingers are identical to the pentium ii processor timings at the edge fingers. see the pentium ? ii processor at 233, 266, 300, and 333 mhz (order number 243335) for more detail. table 9 through table 26 list the ac specifications associated with the intel celeron processor system bus. these specifications are broken into the following categories: table 9 through table 12 contain the system bus clock specifications, table 13 and table 14 contain the agtl+ specifications, table 17 and table 18 are the cmos signal group specifications, table 20 contains timings for the reset conditions, table 22 and table 23 cover apic bus timing, and table 25 and table 26 cover tap timing. for each pair of tables, the first table contains timing specifications for measurement or simulation at the processor edge fingers. the second table contains specifications for simulation at the processor core pads. all intel celeron processor system bus ac specifications for the agtl+ signal group are relative to the rising edge of the bclk input. all agtl+ timings are referenced to v ref for both ?0? and ?1? logic levels unless otherwise specified. the timings specified in this section should be used in conjunction with the i/o buffer models provided by intel. these i/o buffer models, which include package information, are available in quad format as the intel celeron ? processor i/o buffer models , quad xtk format (electronic form). agtl+ layout guidelines are also available in ap-585, pentium ? ii processor agtl+ guidelines (order number 243330). care should be taken to read all notes associated with a particular timing parameter.
datasheet 35 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 0.70 v at the processor edge fingers. this reference is to account for trace length and capacitance on the processor substrate, allowing the processor core to receive the signal with a reference at 1.25 v. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor edge fingers. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 0.70 v at the processor edge fingers. this reference is to account for trace length and capacitance on the processor substrate, allowing the processor core to receive the signal with a reference at 1.25 v. all cmos signal timings (compatibility signals, etc.) are referenced at 1.25 v at the processor edge fingers. 4. the internal core clock frequency is derived from the intel celeron processor system bus clock. the system bus clock to core clock ratio is determined during initialization. table 12 shows the supported ratios for each processor. 5. the bclk period allows a +0.5 ns tolerance for clock driver variation. 6. this specification applies to intel celeron processors when operating at a system bus frequency of 66 mhz. 7. the bclk offset time is the absolute difference needed between the bclk signal arriving at the intel celeron processor edge finger at 0.5 v vs. arriving at the core logic at 1.25 v. the positive offset is needed to account for the delay between the sc242 connector and processor core. the positive offset ensures both the processor core and the core logic receive the bclk edge concurrently. 8. see section 3.1 for intel celeron processor system bus clock signal quality specifications. 9. not 100% tested. specified by design characterization as a clock driver requirement. table 9. system bus ac specifications (clock) at the processor edge fingers (for s.e.p. package) t# parameter min nom max unit figure notes system bus frequency 66.67 mhz t1?: bclk period 15.0 ns 3 4, 5, 6 t1b?: sc242 to core logic bclk offset 0.78 ns 3 absolute value 7,8 t2?: bclk period stability 300 ps see table 10 t3?: bclk high time 4.44 ns 3 @>2.0 v 6 t4?: bclk low time 4.44 ns 3 @<0.5 v 6 t5?: bclk rise time 0.84 2.31 ns 3 (0.5 v?2.0 v) 6, 9 t6?: bclk fall time 0.84 2.31 ns 3 (2.0 v?0.5 v) 6, 9
36 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor core pins. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all cmos signal timings (compatibility signals, etc.) are referenced at 1.25 v at the processor core pins. 4. the internal core clock frequency is derived from the intel celeron processor system bus clock. the system bus clock to core clock ratio is determined during initialization. table 12 shows the supported ratios for each processor. 5. the bclk period allows a +0.5 ns tolerance for clock driver variation. 6. this specification applies to the intel celeron processor when operating at a system bus frequency of 66 mhz. 7. see section 3.1 for intel celeron processor system bus clock signal quality specifications. 8. due to the difficulty of accurately measuring clock jitter in a system, it is recommended that a clock driver be used that is designed to meet the period stability specification into a test load of 10 to 20 pf. this should be measured on the rising edges of adjacent bclks crossing 1.25 v at the processor core pin . the jitter present must be accounted for as a component of bclk timing skew between devices. 9. the clock driver?s closed loop jitter bandwidth must be set low to allow any pll-based device to track the jitter created by the clock driver. the ?20 db attenuation point, as measured into a 10 to 20 pf load, should be less than 500 khz. this specification may be ensured by design characterization and/or measured with a spectrum analyzer. 10.not 100% tested. specified by design characterization as a clock driver requirement. 11.bclk rise time is measure between 0.5v?2.0v. bclk fall time is measured between 2.0 v?0.5 v. table 10. system bus ac specifications (clock) at the processor core pins (for both s.e.p. and pga packages) t# parameter min nom max unit figure notes system bus frequency 66.67 mhz t1: bclk period 15.0 ns 3 4, 5, 6 t2: bclk period stability 300 ps 3 6, 8, 9 t3: bclk high time 4.94 ns 3 @>2.0 v 6 t4: bclk low time 4.94 ns 3 @<0.5 v 6 t5: bclk rise time ? s.e.p.p. and ppga ?fc-pga/fc-pga2 0.34 0.40 1.36 1.6 ns ns 3 3 (0.5 v?2.0 v) 6, 10 10, 11 t6: bclk fall time ? s.e.p.p. and ppga ?fc-pga/fc-pga2 0.34 0.40 1.36 1.6 ns ns 3 3 (2.0 v?0.5 v) 6, 10 10, 11
datasheet 37 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to celeron processors at all frequencies. 2. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor pin. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor pins. 3. not 100% tested. specified by design characterization as a clock driver requirement. 4. the internal core clock frequency is derived from the processor system bus clock. the system bus clock to core clock ratio is determined during initialization. individual processors will only operate at their specified system bus frequency, either 66 mhz or 100 mhz, not both. table 12 shows the supported ratios for each processor. 5. the bclk period allows a +0.5 ns tolerance for clock driver variation. see the appropriate clock synthesizer/ driver specification for details. 6. due to the difficulty of accurately measuring clock jitter in a system, it is recommended that a clock driver be used that is designed to meet the period stability specification into a test load of 10 to 20 pf. this should be measured on the rising edges of adjacent bclks crossing 1.25 v at the processor pin . the jitter present must be accounted for as a component of bclk timing skew between devices. 7. the clock driver?s closed loop jitter bandwidth must be set low to allow any pll-based device to track the jitter created by the clock driver. the ?20 db attenuation point, as measured into a 10 to 20 pf load, should be less than 500 khz. this specification may be ensured by design characterization and/or measured with a spectrum analyzer. see the appropriate clock synthesizer/driver specification for details 8. bclk rise time is measure between 0.5 v?2.0 v. bclk fall time is measured between 2.0 v?0.5 v. 9. bclk high time is measured as the period of time above 2.0 v. bclk low time is measured as the period of time below 0.5 v. 10.this specification applies to pentium iii processors operating at a system bus frequency of 66 mhz. 11.this specification applies to pentium iii processors operating at a system bus frequency of 100 mhz table 11. system bus ac specifications (set clock) 1, 2 t# parameter min nom max unit figure notes system bus frequency 66.67 100.00 mhz 4 t1: bclk period 10.0 10.0 ns 3 4, 5, 10 4, 5, 11 t2: bclk period stability 250 250 ps 6, 7, 10 6, 7, 11 t3: bclk high time 2.5 2.5 ns 3 9, 10 9, 11 t4: bclk low time 2.4 2.4 ns 3 9, 10 9, 11 t5: bclk rise time 0.4 1.6 ns 3 3, 8 t6: bclk fall time 0.4 1.6 ns 3 3, 8
38 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. contact your local intel representative for the latest information on processor frequencies and/or frequency multipliers. 2. while other bus ratios are defined, operation at frequencies other than those listed are not supported. table 12. valid intel ? celeron ? processor system bus, core frequency core frequency (mhz) bclk frequency (mhz) frequency multiplier 266 66 4 300 66 4.5 333 66 5 366 66 5.5 400 66 6 433 66 6.5 466 66 7 500 66 7.5 533 66 8 566 66 8.5 600 66 9 633 66 9.5 667 66 10 700 66 10.5 733 66 11 766 66 11.5 800 100 8 850 100 8.5 900 100 9 950 100 9.5 1,000 100 10 1,100 100 11
datasheet 39 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. not 100% tested. specified by design characterization. 3. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 0.50 v at the processor edge fingers. all agtl+ signal timings (compatibility signals, etc.) are referenced at 1.00 v at the processor edge fingers. 4. this specification applies to intel celeron processors operating with a 66 mhz intel celeron processor system bus only. 5. valid delay timings for these signals are specified into 50 ? to 1.5 v and with v ref at 1.0 v. 6. a minimum of 3 clocks must be guaranteed between two active-to-inactive transitions of trdy#. 7. reset# can be asserted (active) asynchronously, but must be deasserted synchronously. 8. specification is for a minimum 0.40 v swing. 9. specification is for a maximum 1.0 v swing. 10.after v cc core , and bclk become stable. notes: 1. unless otherwise noted, all specifications in this table apply to all intel ? celeron ? processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor core pin. all agtl+ signal timings (compatibility signals, etc.) are referenced at 1.00 v at the processor core pins. 4. this specification applies to the intel celeron processor operating with a 66 mhz intel celeron processor system bus only. 5. valid delay timings for these signals are specified into 25 ? to 1.5 v and with v ref at 1.0 v. 6. a minimum of 3 clocks must be guaranteed between two active-to-inactive transitions of trdy#. 7. reset# can be asserted (active) asynchronously, but must be deasserted synchronously. 8. specification is for a minimum 0.40 v swing. 9. specification is for a maximum 1.0 v swing. 10.after v cc core and bclk become stable. table 13. system bus ac specifications (agtl+ signal group) at the processor edge fingers (for s.e.p. package) t# parameter min max unit figure notes t7?: agtl+ output valid delay 1.07 6.37 ns 4 4, 5 t8?: agtl+ input setup time 1.96 ns 5 4, 6, 7, 8 t9?: agtl+ input hold time 1.53 ns 5 4, 9 t10?: reset# pulse width 1.00 ms 6 10 table 14. system bus ac specifications (agtl+ signal group) at the processor core pins (for s.e.p. package) t# parameter min max unit figure notes t7: agtl+ output valid delay 0.17 5.16 ns 4 5 t8: agtl+ input setup time 2.10 ns 5 5, 6, 7, 8 t9: agtl+ input hold time 0.77 ns 5 9 t10: reset# pulse width 1.00 ms 6 7, 10
40 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the agtl+ signals are ref erenced to the bclk rising edge at 1.25 v at the processor pin. all gtl+ signal timings (compatibility signals, etc.) are referenced at 1.00 v at the processor pins. 4. this specification applies to the processor operating with a 66 mhz system bus only. 5. valid delay timings for these signals are specified into 25 ? to 1.5 v and with v ref at 1.0 v. 6. a minimum of 3 clocks must be guaranteed between two active-to-inactive transitions of trdy#. 7. reset# can be asserted (active) asynchronously, but must be deasserted synchronously. 8. after v cc core and bclk become stable. notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processors at all frequencies and cache sizes. 2. these specifications are tested during manufacturing. 3. all ac timings for the agtl+ signals are referenced to the bclk rising edge at 1.25 v at the processor pin. all agtl+ signal timings (compatibility signals, etc.) are referenced at 1.00v at the processor pins. 4. valid delay timings for these signals are specified into 50 ? to 1.5 v and with v ref at 1.0 v. 5. a minimum of 3 clocks must be guaranteed between two active-to-inactive transitions of trdy#. 6. reset# can be asserted (active) asynchronously, but must be deasserted synchronously. 7. specification is for a minimum 0.40 v swing from v ref - 200 mv to v ref + 200 mv. this assumes an edge rate of 0.3 v/ns. 8. specification is for a maximum 1.0 v swing from v tt ? 1v to v tt . this assumes an edge rate of 3 v/ns. 9. this should be measured after v cc core , v cc cmos , and bclk become stable. 10.this specification applies to the fc-pga/fc-pga2 packages running at 66 mhz system bus frequency. 11.this specification applies to the fc-pga/fc-pga2 packages running at 100 mhz system bus frequency. table 15. processor system bus ac specifications (agtl+ signal group) at the processor core pins (for ppga package) t# parameter min max unit figure notes t7: agtl+ output valid delay 0.30 4.43 ns 4 5 t8: agtl+ input setup time 2.10 ns 5 5, 6, 7 t9: agtl+ input hold time 0.85 ns 5 t10: reset# pulse width 1.00 ms 6 7, 8 table 16. system bus ac specifications (agtl+ signal group) at the processor core pins (for fc-pga/fc-pga2 packages) t# parameter min max unit figure notes t7: agtl+ output valid delay 0.40 3.25 ns 4 4, 10, 11 t8: agtl+ input setup time 1.20 ns 5 5, 6, 7, 10, 11 t9: agtl+ input hold time 1.00 ns 5 8, 10, 11 t10: reset# pulse width 1.00 ms 7 6, 9, 10, 11
datasheet 41 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. not 100% tested. specified by design characterization. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 0.50 v at the processor edge fingers. all cmos signal timings (address bus, data bus, etc.) are referenced at 1.25 v. 4. these signals may be driven asynchronously. 5. this specification only applies when the apic is enabled and the lint1 or lint0 pin is configured as an edge-triggered interrupt with fixed delivery; otherwise, specification t14 applies. pwrgood must remain below v il,max ( table 6 ) until all the voltage planes meet the voltage tolerance specifications in table 5 and bclk has met the bclk ac specifications in table 10 for at least 10 clock cycles. pwrgood must rise glitch-free and monotonically to 2.5 v. 6. when driven inactive or after v cc core , and bclk become stable. 7. if the bclk signal meets its ac specification within 150 ns of turning on, then the pwrgood inactive pulse width specification (t15) is waived and bclk may start after pwrgood is asserted. pwrgood must still remain below v il,max until all the voltage planes meet the voltage tolerance specifications. notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the cmos signals are referenced to the bclk rising edge at 1.25 v at the processor core pins. all cmos signal timings (address bus, data bus, etc.) are referenced at 1.25 v. 4. these signals may be driven asynchronously. 5. this specification only applies when the apic is enabled and the lint1 or lint0 pin is configured as an edge-triggered interrupt with fixed delivery; otherwise, specification t14 applies. 6. when driven inactive or after v cc core , and bclk become stable. 7. if the bclk signal meets its ac specification within 150 ns of turning on, then the pwrgood inactive pulse width specification (t15) is waived and bclk may start after pwrgood is asserted. pwrgood must still remain below v il,max until all the voltage planes meet the voltage tolerance specifications. pwrgood must remain below v il,max ( table 6 ) until all the voltage planes meet the voltage tolerance specifications in table 5 and bclk has met the bclk ac specifications in table 10 for at least 10 clock cycles. pwrgood must rise glitch-free and monotonically to 2.5 v. table 17. system bus ac specifications (cmos signal group) at the processor edge fingers (for s.e.p. package) t# parameter min max unit figure notes t14?: cmos input pulse width, except pwrgood 2bclks 8 active and inactive states t14b: lint[1:0] input pulse width 6 bclks 8 5 t15?: pwrgood inactive pulse width 10 bclks 8 6, 7 table 18. system bus ac specifications (cmos signal group) at the processor core pins (for both s.e.p., pga, and fc-pga/fc-pga2 packages) t# parameter min max unit figure notes t14: cmos input pulse width, except pwrgood 2bclks 8 active and inactive states t14b: lint[1:0] input pulse width (s.e.p.p. only) 6bclks 8 5 t15: pwrgood inactive pulse width 10 bclks 8 6, 7
42 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to celeron processors at all frequencies 2. these specifications are tested during manufacturing. 3. these signals may be driven asynchronously. 4. all cmos outputs shall be asserted for at least 2 bclks. 5. when driven inactive or after v cc core , v tt , v cc cmos , and bclk become stable. notes: 1. unless otherwise noted, all specifications in this table apply to all intel ? celeron ? processor frequencies. notes: 1. unless otherwise noted, all specifications in this table apply to celeron fc-pga/fc-pga2 processors at all frequencies and cache sizes. 2. for a reset, the clock ratio defined by these signals must be a safe value (their final or a lower-multiplier) within this delay unless pwrgood is being driven inactive. 3. these parameters apply to processor engineering samples only. for production units, the processor core frequency will be determined through the processor internal logic. table 19. system bus ac specifications (cmos signal group) 1, 2, 3, 4 t# parameter min max unit figure notes t14: cmos input pulse width, except pwrgood 2bclks 4 active and inactive states t15: pwrgood inactive pulse width 10 bclks 4 , 8 5 table 20. system bus ac specifications (reset conditions) (for both s.e.p. and ppga packages) t# parameter min max unit figure notes t16: reset configuration signals (a[14:5]#, br0#, flush#, init#) setup time 4bclks 6 before deassertion of reset# t17: reset configuration signals (a[14:5]#, br0#, flush#, init#) hold time 220bclks 6 after clock that deasserts reset# table 21. system bus ac specifications (reset conditions) (for the fc-pga/fc-pga2 packages) t# parameter min max unit figure notes t16: reset configuration signals (a[14:5]#, br0#, init#) setup time 4bclks 7 before deassertion of reset# t17: reset configuration signals (a[14:5]#, br0#, init#) hold time 220bclks 7 after clock that deasserts reset# t18: reset configuration signals (a20m#, ignne#, lint[1:0]) setup time 1ms 7 before deassertion of reset#, 3 t19: reset configuration signals (a20m#, ignne#, lint[1:0]) delay time 5bclks 7 after assertion of reset#, 2, 3 t20: reset configuration signals (a20m#, ignne#, lint[1:0]) hold time 220bclks 7 after clock that deasserts reset#, 3
datasheet 43 intel ? celeron ? processor up to 1.10 ghz 44 notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. not 100% tested. specified by design characterization. 3. all ac timings for the apic i/o signals are referenced to the picclk rising edge at 0.7 v at the processor edge fingers. all apic i/o signal timings are referenced at 1.25 v at the processor edge fingers. 4. this specification applies to intel celeron processors operating with a 66 mhz intel celeron processor system bus only. 5. referenced to picclk rising edge. 6. for open drain signals, valid delay is synonymous with float delay. 7. valid delay timings for these signals are specified to 2.5 v +5%. table 22. system bus ac specifications (apic clock and apic i/o) at the processor edge fingers (for s.e.p. package) t# parameter min max unit figure notes t21?: picclk frequency 2.0 33.3 mhz t22?: picclk period 30.0 500.0 ns 3 t23?: picclk high time 12.0 ns 3 t24?: picclk low time 12.0 ns 3 t25?: picclk rise time 0.25 3.0 ns 3 t26?: picclk fall time 0.25 3.0 ns 3 t27?: picd[1:0] setup time 8.5 ns 5 5 t28?: picd[1:0] hold time 3.0 ns 5 5 t29?: picd[1:0] valid delay 3.0 12.0 ns 4 5, 6, 7
44 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the apic i/o signals are referenced to the picclk rising edge at 1.25 v at the processor core pins. all apic i/o signal timings are referenced at 1.25 v at the processor core pins. 4. this specification applies to intel celeron processors operating with a 66 mhz intel celeron processor system bus only. 5. referenced to picclk rising edge. 6. for open drain signals, valid delay is synonymous with float delay. 7. valid delay timings for these signals are specified to 2.5 v +5%. 8. valid delay timings for these signals are specified to 1.5 v +5%. table 23. system bus ac specifications (apic clock and apic i/o) at the processor core pins (for s.e.p. and pga packages) t# parameter min max unit figure notes t21: picclk frequency 2.0 33.3 mhz t22: picclk period 30.0 500.0 ns 3 t23: picclk high time ? s.e.p.p and ppga ?fc-pga/fc-pga2 11.0 10.5 ns ns 3 3 @>2.0 v @>1.7 v t24: picclk low time ? s.e.p.p and ppga ?fc-pga/fc-pga2 11.0 10.5 ns ns 3 3 @<0.5 v @<0.7 v t25: picclk rise time 0.25 3.0 ns 3 (0.5 v?2.0 v) t26: picclk fall time 0.25 3.0 ns 3 (2.0 v?0.5 v) t27: picd[1:0] setup time ? s.e.p.p and ppga ?fc-pga/fc-pga2 8.0 5.0 ns ns 5 5 5 5 t28: picd[1:0] hold time 2.5 ns 5 5 t29: picd[1:0] valid delay (s.e.p.p and ppga only) 1.5 10.0 ns 4 5, 6, 7 t29a: picd[1:0] valid delay (rising edge) (fc-pga/fc-pga2 only) 1.5 8.7 ns 4 5, 6, 8 t29b: picd[1:0] valid delay (falling edge) (fc-pga/fc-pga2 only) 1.5 12.0 ns 4 5, 6, 8
datasheet 45 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to celeron processors at all frequencies. 2. these specifications are tested during manufacturing. 3. all ac timings for the apic i/o signals are referenced to the picclk rising edge at 1.25 v at the processor pins. all apic i/o signal timings are referenced at 0.75 v at the processor pins. 4. referenced to picclk rising edge. 5. for open drain signals, valid delay is synonymous with float delay. 6. valid delay timings for these signals are specified into 150 ? load pulled up to 1.5 v. notes: 1. unless otherwise noted, all specifications in this table apply to all intel ? celeron ? processor frequencies. 2. all ac timings for the tap signals are referenced to the tck rising edge at 0.70 v at the processor edge fingers. all tap signal timings (tms, tdi, etc.) are referenced at 1.25 v at the processor edge fingers. 3. not 100% tested. specified by design characterization. 4. 1 ns can be added to the maximum tck rise and fall times for every 1 mhz below 16.667 mhz. 5. referenced to tck rising edge. 6. referenced to tck falling edge. 7. valid delay timing for this signal is specified to 2.5 v +5%. 8. non-test outputs and inputs are the normal output or input signals (besides tck, trst#, tdi, tdo, and tms). these timings correspond to the response of these signals due to tap operations. 9. during debug port operation, use the normal specified timings rather than the tap signal timings. table 24. system bus ac specifications (apic clock and apic i/o) 1, 2, 3 t# parameter min max unit figure notes t21: picclk frequency 2.0 33.3 mhz t22: picclk period 30.0 500.0 ns 3 t23: picclk high time 10.5 ns 3 @ > 1.7 v t24: picclk low time 10.5 ns 3 @ < 0.7 v t25: picclk rise time 0.25 3.0 ns 3 (0.7 v?1.7 v) t26: picclk fall time 0.25 3.0 ns 3 (1.7 v?0.7 v) t27: picd[1:0] setup time 5.0 ns 5 4 t28: picd[1:0] hold time 2.5 ns 5 4 t29a: picd[1:0] valid delay (rising edge) 1.5 8.7 ns 3 , 4 4, 5, 6 t29b: picd[1:0] valid delay (falling edge) 1.5 12.0 ns 3 , 4 4, 5, 6 table 25. system bus ac specifications (tap connection) at the processor edge fingers (for s.e.p. package) t# parameter min max unit figure notes t30?: tck frequency 16.667 mhz t31?: tck period 60.0 ns 3 t32?: tck high time 25.0 ns 3 @1.7 v t33?: tck low time 25.0 ns 3 @0.7 v t34?: tck rise time 5.0 ns 3 (0.7 v?1.7 v) 4 t35?: tck fall time 5.0 ns 3 (1.7 v?0.7 v) 4 t36?: trst# pulse width 40.0 ns 6 asynchronous t37?: tdi, tms setup time 5.5 ns 9 5 t38?: tdi, tms hold time 14.5 ns 9 5 t39?: tdo valid delay 2.0 13.5 ns 9 6, 7 t40?: tdo float delay 28.5 ns 9 6, 7 t41?: all non-test outputs valid delay 2.0 27.5 ns 9 6, 8, 9 t42?: all non-test inputs setup time 27.5 ns 9 6, 8, 9 t43?: all non-test inputs setup time 5.5 ns 9 5, 8, 9 t44?: all non-test inputs hold time 14.5 ns 9 5, 8, 9
46 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. for the s.e.p. and ppga packages: all ac timings for the tap signals are referenced to the tck rising edge at 1.25 v at the processor core pins. all tap signal timings (tms, tdi, etc.) are referenced at 1.25 v at the processor core pins. for the fc-pga/fc-pga2 packages: all ac timings for the tap signals are referenced to the tck rising edge at 0.75 v at the processor pins. all tap signal timings (tms, tdi, etc.) are referenced at 0.75 v at the processor pins. 3. these specifications are tested during manufacturing, unless otherwise noted. 4. 1 ns can be added to the maximum tck rise and fall times for every 1 mhz below 16.667 mhz. 5. referenced to tck rising edge. 6. referenced to tck falling edge. 7. for the s.e.p. and ppga packages: valid delay timing for this signal is specified to 2.5 v +5%. for the fc-pga/fc-pga2 packages: valid delay timing for this signal is specified to 1.5 v +3%. 8. non-test outputs and inputs are the normal output or input signals (besides tck, trst#, tdi, tdo, and tms). these timings correspond to the response of these signals due to tap operations. 9. during debug port operation, use the normal specified timings rather than the tap signal timings. 10.not 100% tested. specified by design characterization. table 26. system bus ac specifications (tap connection) at the processor core pins (for both s.e.p. and ppga packages) t# parameter min max unit figure notes t30: tck frequency 16.667 mhz t31: tck period 60.0 ns 3 t32: tck high time 25.0 ns 3 @1.7 v; 10 t33: tck low time 25.0 ns 3 @0.7 v; 10 t34: tck rise time 5.0 ns 3 (0.7 v?1.7 v); 4, 10 t35: tck fall time 5.0 ns 3 (1.7 v?0.7 v) ; 4, 10 t36: trst# pulse width 40.0 ns 6 asynchronous; 10 t37: tdi, tms setup time 5.0 ns 9 5 t38: tdi, tms hold time 14.0 ns 9 5 t39: tdo valid delay 1.0 10.0 ns 9 6, 7 t40: tdo float delay 25.0 ns 9 6, 7, 10 t41: all non-test outputs valid delay 2.0 25.0 ns 9 6, 8, 9 t42: all non-test inputs setup time 25.0 ns 9 6, 8, 9, 10 t43: all non-test inputs setup time 5.0 ns 9 5, 8, 9 t44: all non-test inputs hold time 13.0 ns 9 5, 8, 9
datasheet 47 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processors frequencies. 2. all ac timings for the tap signals are referenced to the tck rising edge at 0.75 v at the processor pins. all tap signal timings (tms, tdi, etc.) are referenced at 0.75 v at the processor pins. 3. these specifications are tested during manufacturing, unless otherwise noted. 4. 1 ns can be added to the maximum tck rise and fall times for every 1 mhz below 16.667 mhz. 5. referenced to tck rising edge. 6. referenced to tck falling edge. 7. valid delay timing for this signal is specified to 1.5 v (1.25 v for agtl platforms). 8. non-test outputs and inputs are the normal output or input signals (besides tck, trst#, tdi, tdo, and tms). these timings correspond to the response of these signals due to tap operations. 9. during debug port operation, use the normal specified timings rather than the tap signal timings. 10.not 100% tested. specified by design characterization. table 27. system bus ac specifications (tap connection) 1, 2, 3 t# parameter min max unit figure notes t30: tck frequency 16.667 mhz t31: tck period 60.0 ns 3 t32: tck high time 25.0 ns 3 v ref + 0.200 v, 10 t33: tck low time 25.0 ns 3 v ref ? 0.200 v, 10 t34: tck rise time 5.0 ns 3 (v ref ? 0.200 v) ? (v ref + 0.200 v), 4, 10 t35: tck fall time 5.0 ns 3 (v ref + 0.200 v) ? (v ref ? 0.200 v), 4, 10 t36: trst# pulse width 40.0 ns 10 asynchronous, 10 t37: tdi, tms setup time 5.0 ns 9 5 t38: tdi, tms hold time 14.0 ns 9 5 t39: tdo valid delay 1.0 10.0 ns 9 6, 7 t40: tdo float delay 25.0 ns 9 6, 7, 10 t41: all non-test outputs valid delay 2.0 25.0 ns 9 6, 8, 9 t42: all non-test inputs setup time 25.0 ns 9 6, 8, 9, 10 t43: all non-test inputs setup time 5.0 ns 9 5, 8, 9 t44: all non-test inputs hold time 13.0 ns 9 5, 8, 9
48 datasheet intel ? celeron ? processor up to 1.10 ghz note: for figure 3 through figure 10 , the following apply: 1. figure 3 through figure 10 are to be used in conjunction with table 9 through table 26 . 2. all ac timings for the agtl+ signals at the processor edge fingers are referenced to the bclk rising edge at 0.50 v. this reference is to account for trace length and capacitance on the processor substrate, allowing the processor core to receive the signal with a reference at 1.25 v. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor edge fingers. 3. all ac timings for the agtl+ signals at the processor core pins are referenced to the bclk rising edge at 1.25 v. all agtl+ signal timings (address bus, data bus, etc.) are referenced at 1.00 v at the processor core pins. 4. all ac timings for the cmos signals at the processor edge fingers are referenced to the bclk rising edge at 0.50 v. this reference is to account for trace length and capacitance on the processor substrate, allowing the processor core to receive the signal with a reference at 1.25 v. all cmos signal timings (compatibility signals, etc.) are referenced at 1.25 v at the processor edge fingers. 5. all ac timings for the apic i/o signals at the processor edge fingers are referenced to the picclk rising edge at: 0.7 v for s.e.p. and ppga packages and 0.75 v for the fc-pga/ fc-pga2 packages. all apic i/o signal timings are referenced at 1.25 v for s.e.p. and ppga packages and 0.75 v for the fc-pga/fc-pga2 packages at the processor edge fingers. 6. all ac timings for the tap signals at the processor edge fingers are referenced to the tck rising edge at 0.70 v for s.e.p. and ppga packages and 0.75 v for the fc-pga/fc-pga2 packages. all tap signal timings (tms, tdi, etc.) are referenced at 1.25 v for s.e.p. and ppga packages and 0.75 v for the fc-pga/fc-pga2 packages at the processor edge fingers. figure 2. bclk to core logic offset bclk at edge fingers 0.5v bclk at core logic 1.25v t1b'
datasheet 49 intel ? celeron ? processor up to 1.10 ghz figure 3. bclk*, picclk, and tck generic clock waveform figure 4. system bus valid delay timings figure 5. system bus setup and hold timings note: bclk is referenced to 0.5 v and 2.0 v. picclk is referenced to 0.7 v and 1.7 v. for s.e.p. and ppga packages, tck is referenced to 0.7 v and 1.7 v. for the fc-pga package, tck is referenced to v ref 200mv. 1.7v (2.0v*) 1.25v 0.7v (0.5v*) t r t p t f t h t l clk t r = t5, t25, t34 (rise time) t f = t6, t26, t35 (fall time) t h = t3, t23, t32 (high time) t l = t4, t24, t33 (low time) t p = t1, t22, t31 (blck, tck, picclk period) v = 1.0v for agtl+ signal group; for s.e.p and ppga packages, 1.25v for cmos, apic and jtag signal groups for fc-pga package, 0.75v for cmos, apic and tap signal groups clk signal valid valid tx v tx tpw tx = t7, t11, t29a, t29b (valid delay) tpw = t14, t14b, t15 (pulse width) clk signal valid ts v th ts = t8, t12, t27 (setup time) th = t9, t13, t28 (hold time) v = 1.0v for agtl+ signal group; for s.e.p. and ppga packages, 1.25v for apic and jtag signal groups for the fc-pga package, 0.75v for apic and tap signal groups
50 datasheet intel ? celeron ? processor up to 1.10 ghz figure 6. system bus reset and configuration timings (for the s.e.p. and ppga packages) figure 7. system bus reset and configuration timings (for the fc-pga/fc-pga2 package) valid t v t w t x t u t t bclk reset# configuration (a[14:5]#, br0#, flush#, int#) t t = t9 (agtl+ input hold time) t u = t8 (agtl+ input setup time) t v = t10 (reset# pulse width) t w = t16 (reset configuration signals (a[14:5]#, br0#, flush#, init#) setup time) t x = t17 (reset configuration signals (a[14:5]#, br0#, flush#, init#) hold time) t y safe valid t z valid t v t w t x t u t t bclk reset# configuration (a20m#, ignne#, lint[1:0]) configuration (a[14:5]#, br0#, flush#, int#) t t = t9 (agtl+ input hold time) t u = t8 (agtl+ input setup time) t v = t10 (reset# pulse width) t w = t16 (reset configuration signals (a[14:5]#, br0#, flush#, init#) setup time) t x = t17 (reset configuration signals (a[14:5]#, br0#, flush#, init#) hold time) t20 (reset configuration signals (a20m#, ignne#, lint[1:0]) hold time) ty = t19 (reset configuration signals (a20m#, ignne#, lint[1:0]) delay time) tz = t18 (reset configuration signals (a20m#, ignne#, lint[1:0]) setup time)
datasheet 51 intel ? celeron ? processor up to 1.10 ghz figure 8. power-on reset and configuration timings figure 9. test timings (tap connection) figure 10. test reset timings t a valid ratio t c t b pwrgood reset# configuration (a20m#, ignne#, intr, nmi) t a = t15 (pwrgood inactive pulse) t b = t10 (reset# pulse width) t c = t20 (reset configuration signals (a20m#, ignne#, lint[1:0]) hold time) (fc-pga) bclk v il, max v ih, min vcc core , v tt , v ref tck t di, tms input signals tdo output signals 1.25v t v t w t r t s t x t u t y t z 1.25v t r t43 (all non-test inputs setup time) = t s t44 (all non-test inputs hold time) = t u t40 (tdo float delay) = t v t37 (tdi, tms setup time) = t w t38 (tdi, tms hold time) = t x t39 (tdo valid delay) = t y t41 (all non-test outputs valid delay) = t z t42 (all non-test outputs float delay) = trst# c 1.25v t q t q t37 (trst# pulse width) =
52 datasheet intel ? celeron ? processor up to 1.10 ghz 3.0 system bus signal simulations signals driven on the celeron processor system bus should meet signal quality specifications to ensure that the components read data properly and to ensure that incoming signals do not affect the long term reliability of the component. specifications are provided for simulation at the processor core; guidelines are provided for correlation to the processor edge fingers. these edge finger guidelines are intended for use during testing and measurement of system signal integrity. violations of these guidelines are permitted, but if they occur, simulation of signal quality at the processor core should be performed to ensure that no violations of signal quality specifications occur. meeting the specifications at the processor core in table 28 , table 31 , and table 34 ensures that signal quality effects will not adversely affect processor operation, but does not necessarily guarantee that the guidelines in table 30 , table 33 , and table 35 will be met. 3.1 system bus clock (bclk) signal quality specifications and measurement guidelines table 28 describes the bclk signal quality specifications at the processor core for both s.e.p. and ppga packages. table 29 shows the bclk and picclk signal quality specifications at the processor core for the fc-pga/fc-pga2 packages. table 30 describes guidelines for signal quality measurement at the processor edge fingers. figure 11 describes the signal quality waveform for the system bus clock at the processor core pins; figure 12 describes the signal quality waveform for the system bus clock at the processor edge fingers. notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. this is the intel celeron processor system bus clock overshoot and undershoot specification for 66 mhz system bus operation. 3. the rising and falling edge ringback voltage specified is the minimum (rising) or maximum (falling) absolute voltage the bclk signal can dip back to after passing the v ih (rising) or v il (falling) voltage limits. this specification is an absolute value. table 28. bclk signal quality specifications for simulation at the processor core (for both s.e.p. and ppga packages) t# parameter min nom max unit figure notes v1: bclk v il 0.5 v 11 v2: bclk v ih 2.0 v 11 2 v3: v in absolute voltage range ?0.7 3.5 v 11 2 v4: rising edge ringback 1.7 v 11 3 v5: falling edge ringback 0.7 v 11 3
datasheet 53 intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to fc-pga/fc-pga2 processors frequencies and cache sizes. 2. the rising and falling edge ringback voltage specified is the minimum (rising) or maximum (falling) absolute voltage the bclk/picclk signal can dip back to after passing the v ih (rising) or v il (falling) voltage limits. this specification is an absolute value. table 29. bclk/picclk signal quality specifications for simulation at the processor pins (for the fc-pga/fc-pga2 packages) t# parameter min nom max unit figure notes v1: bclk v il 0.50 v 11 v1: picclk v il 0.70 v 11 v2: bclk v ih 2.00 v 11 v2: picclk v ih 2.00 v 11 v3: v in absolute voltage range ?0.58 3.18 v 11 v4: bclk rising edge ringback 2.00 v 11 2 v4: picclk rising edge ringback 2.00 v 11 2 v5: bclk falling edge ringback 0.50 v 11 2 v5: picclk falling edge ringback 0.70 v 11 2 figure 11. bclk, tck, picclk generic clock waveform at the processor core pins v2 v1 v3 v3 t3 v5 v4 t6 t4 t5
54 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. this is the intel celeron processor system bus clock overshoot and undershoot measurement guideline. 3. the rising and falling edge ringback voltage guideline is the minimum (rising) or maximum (falling) absolute voltage the bclk signal may dip back to after passing the v ih (rising) or v il (falling) voltage limits. this guideline is an absolute value. 4. the bclk at the processor edge fingers may have a dip or ledge midway on the rising or falling edge. the midpoint voltage level of this ledge should be within the range of the guideline. 5. the ledge (v7) is allowed to have peak-to-peak oscillation as given in the guideline. table 30. bclk signal quality guidelines for edge finger measurement (for the s.e.p. package) t# parameter min nom max unit figure notes v1?: bclk v il 0.5 v 12 v2?: bclk v ih 2.0 v 12 v3?: v in absolute voltage range ?0.5 3.3 v 12 2 v4?: rising edge ringback 2.0 v 12 3 v5?: falling edge ringback 0.5 v 12 3 v6?: t line ledge voltage 1.0 1.7 v 12 at ledge midpoint 4 v7?: t line ledge oscillation 0.2 v 12 peak-to-peak 5 figure 12. bclk, tck, picclk generic clock waveform at the processor edge fingers t3 v3 v5 v3 v 2 v 1 v7 v6 t6 t4 t5 v4
datasheet 55 intel ? celeron ? processor up to 1.10 ghz 3.2 agtl+ signal quality specifications and measurement guidelines many scenarios have been simulated to generate a set of agtl+ layout guidelines which are available in ap-585, pentium ? ii processor agtl+ guidelines (order number 243330). refer to the pentium ? ii processor developer's manual (order number 243502) for the agtl+ buffer specification. table 31 provides the agtl+ signal quality specifications (for both the s.e.p. and ppga packages) for use in simulating signal quality at the processor core. table 32 provides the agtl+ signal quality specifications (for the fc-pga/fc-pga2 packages) for use in simulating signal quality at the processor core. table 33 provides agtl+ signal quality guidelines for measuring and testing signal quality at the processor edge fingers. figure 13 describes the signal quality waveform for agtl+ signals at the processor core and edge fingers. for more information on the agtl+ interface, see the pentium ? ii processor developer's manual (order number 243502). notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. specifications are for the edge rate of 0.3 ? 0.8 v/ns. see figure 13 for the generic waveform. 3. all values specified by design characterization. 4. this specification applies to intel celeron processors operating with a 66 mhz intel celeron processor system bus only. 5. ringback below v ref + 20 mv is not supported. notes: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. 2. specifications are for the edge rate of 0.3 ? 0.8v/ns. see figure 13 for the generic waveform. 3. all values specified by design characterization. 4. see table 36 for maximum allowable overshoot. 5. ringback between v ref + 100 mv and v ref + 200 mv or v ref ? 200 mv and v ref ? 100 mvs requires the flight time measurements to be adjusted as described in the intel agtl+ specifications ( intel ? pentium ? ii developers manual ). ringback below v ref + 100 mv or above v ref ? 100 mv is not supported. 6. intel recommends simulations not exceed a ringback value of v ref 200 mv to allow margin for other sources of system noise. 7. a negative value for indicates that the amplitude of ringback is above v ref . (i.e., = ?100 mv specifies the signal cannot ringback below v ref + 100 mv). 8. and : are measured relative to v ref . : is measured relative to v ref + 200 mv. 9. all ringback entering the overdrive region must have flight time correction. 10.overshoot specifications for ringback do not correspond to overshoot specifications in section 3.4 . table 31. agtl+ signal groups ringback tolerance specifications at the processor core (for both the s.e.p. and ppga packages) t# parameter min unit figure notes : overshoot 100 mv 13 4 : minimum time at high 1.00 ns 13 4 : amplitude of ringback ?100 mv 13 4, 5 : final settling voltage 100 mv 13 4 : duration of squarewave ringback n/a ns 13 table 32. agtl+ signal groups ringback tolerance specifications at the processor pins (for fc-pga/fc-pga2 packages) t# parameter min unit figure notes : overshoot 100 mv 13 4, 8, 9, 10 : minimum time at high 0.50 ns 13 9 : amplitude of ringback ?200 mv 13 5, 6, 7, 8 : final settling voltage 200 mv 13 8 : duration of squarewave ringback n/a ns 13
56 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. unless otherwise noted, all guidelines in this table apply to all celeron processor frequencies. 2. guidelines are for the edge rate of 0.3 ? 0.8 v/ns. see figure 13 for the generic waveform. 3. all values specified by design characterization. 4. this guideline applies to intel celeron processors operating with a 66 mhz system bus only. 5. ringback below v ref + 250 mv is not supported. table 33. agtl+ signal groups ringback tolerance guidelines for edge finger measurement on the s.e.p. package t# parameter min unit figure notes ?: overshoot 100 mv 13 ?: minimum time at high 1.5 ns 13 4 ?: amplitude of ringback ?250 mv 13 4, 5 ?: final settling voltage 250 mv 13 4 ?: duration of squarewave ringback n/a ns 13 figure 13. low to high agtl+ receiver ringback tolerance v start v +0.2 ref v ref v ?0.2 ref time clock note: high to low case is analogous. 0.7v clk ref
datasheet 57 intel ? celeron ? processor up to 1.10 ghz 3.3 non-agtl+ signal quality specifications and measurement guidelines there are three signal quality parameters defined for non-agtl+ signals: overshoot/undershoot, ringback, and settling limit. all three signal quality parameters are shown in figure 14 for the non- agtl+ signal group. notes: 1. for the fc-pga/fc-pga2 packages, v hi = 1.5 v for all non-agtl+ signals except for bclk, picclk, and pwrgood. v hi = 2.5 v for bclk, picclk, and pwrgood. bclk and picclk signal quality is detailed in section 3.1 . 3.3.1 overshoot/undershoot guidelines overshoot (or undershoot) is the absolute value of the maximum voltage above the nominal high voltage or below v ss . the overshoot/undershoot guideline limits transitions beyond v cc or v ss due to the fast signal edge rates. (see figure 14 for non-agtl+ signals.) the processor can be damaged by repeated overshoot events on the voltage tolerant buffers if the charge is large enough (i.e., if the overshoot is great enough). the ppga and s.e.p. packages have 2.5 v tolerant buffers and the fc-pga/fc-pga2 packages has 1.5 v or 2.5 v tolerant buffers. however, excessive ringback is the dominant detrimental system timing effect resulting from overshoot/undershoot (i.e., violating the overshoot/undershoot guideline will make satisfying the ringback specification difficult). the overshoot/undershoot guideline is 0.7 v for the ppga and s.e.p. packages and 0.3 v for the fc-pga/fc-pga2 packages and assumes the absence of diodes on the input. these guidelines should be verified in simulations without the on-chip esd protection diodes present because the diodes will begin clamping the signals (2.5 v tolerant signals for the s.e.p. and ppga packages, and 2.5 v or 1.5 v tolerant signals for the fc-pga/ fc-pga2 packages) beginning at approximately 0.7 v above the appropriate supply and 0.7 v below v ss . if signals are not reaching the clamping voltage, this will not be an issue. a system should not rely on the diodes for overshoot/undershoot protection as this will negatively affect the life of the components and make meeting the ringback specification very difficult. figure 14. non-agtl+ overshoot/undershoot, settling limit, and ringback undershoot overshoot settling limit settling limit rising-edge ringback falling-edge ringback v lo v ss time v hi
58 datasheet intel ? celeron ? processor up to 1.10 ghz 3.3.2 ringback specification ringback refers to the amount of reflection seen after a signal has switched. the ringback specification is the voltage that the signal rings back to after achieving its maximum absolute value . (see figure 14 for an illustration of ringback.) excessive ringback can cause false signal detection or extend the propagation delay. the ringback specification applies to the input pin of each receiving agent. violations of the signal ringback specification are not allowed under any circumstances for non-agtl+ signals. ringback can be simulated with or without the input protection diodes that can be added to the input buffer model. however, signals that reach the clamping voltage should be evaluated further. see table 34 for the signal ringback specifications for non-agtl+ signals for simulations at the processor core, and table 35 for guidelines on measuring ringback at the edge fingers. table 36 lists the ringback specifications for the fc-pga/fc-pga2 packages. note: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. note: 1. unless otherwise noted, all specifications in this table apply to all celeron processor frequencies. notes: 1. unless otherwise noted, all specifications in this table apply to all fc-pga/fc-pga2 processor frequencies and cache sizes. table 34. signal ringback specifications for non-agtl+ signal simulation at the processor core (s.e.p. and ppga packages) input signal group transition maximum ringback (with input diodes present) unit figure notes non-agtl+ signals 0 11.7v 14 non-agtl+ signals 1 00.7v 14 table 35. signal ringback guidelines for non-agtl+ signal edge finger measurement (s.e.p. package) input signal group transition maximum ringback (with input diodes present) unit figure notes non-agtl+ signals 0 12.0v 14 non-agtl+ signals 1 00.7v 14 table 36. signal ringback specifications for non-agtl+ signal simulation at the processor pins (fc-pga/fc-pga2 packages) input signal group transition maximum ringback (with input diodes present) unit figure non-agtl+ signals 0 1v ref + 0.200 v 16 pwrgood 0 12.0v 16 non-agtl+ signals 1 0v ref ? 0.200 v 16
datasheet 59 intel ? celeron ? processor up to 1.10 ghz 3.3.3 settling limit guideline settling limit defines the maximum amount of ringing at the receiving pin that a signal must reach before its next transition. the amount allowed is 10 percent of the total signal swing (v hi ? v lo ) above and below its final value. a signal should be within the settling limits of its final value, when either in its high state or low state, before it transitions again. signals that are not within their settling limit before transitioning are at risk of unwanted oscillations which could jeopardize signal integrity. simulations to verify settling limit may be done either with or without the input protection diodes present. violation of the settling limit guideline is acceptable if simulations of 5 to 10 successive transitions do not show the amplitude of the ringing increasing in the subsequent transitions. 3.4 agtl+ signal quality specifications and measurement guidelines (fc-pga/fc-pga2 packages) 3.4.1 overshoot/undershoot guidelines (fc-pga/fc-pga2 packages) overshoot (or undershoot) is the absolute value of the maximum voltage above the nominal high voltage or below v ss . the overshoot guideline limits transitions beyond v cc or v ss due to the fast signal edge rates. the processor can be damaged by repeated overshoot events on 1.5 v or 2.5 v tolerant buffers if the charge is large enough (i.e., if the overshoot is great enough). determining the impact of an overshoot/undershoot condition requires knowledge of the magnitude, the pulse direction and the activity factor (af). permanent damage to the processor is the likely result of excessive overshoot/undershoot. violating the overshoot/undershoot guideline will also make satisfying the ringback specification difficult. when performing simulations to determine impact of overshoot and overshoot, esd diodes must be properly characterized. esd protection diodes do not act as voltage clamps and will not provide overshoot or undershoot protection. esd diodes modeled within intel i/o buffer models do not clamp undershoot or overshoot and will yield correct simulation results. if other i/o buffer models are being used to characterize the fc-pga/fc-pga2 processor performance, care must be taken to ensure that esd models do not clamp extreme voltage levels. intel i/o buffer models also contain i/o capacitance characterization. therefore, removing the esd diodes from an i/o buffer model will impact results and may yield excessive overshoot/undershoot. 3.4.2 overshoot/undershoot magnitude (fc-pga/fc-pga2 packages) magnitude describes the maximum potential difference between a signal and its voltage reference level, v ss (overshoot) and v tt (undershoot). while overshoot can be measured relative to v ss using one probe (probe to signal and gnd lead to v ss ), undershoot must be measured relative to v tt . this can be accomplished by simultaneously measuring the v tt plane while measuring the signal undershoot. today?s oscilloscopes can easily calculate the true undershoot waveform using a math function where the signal waveform is subtracted from the v tt waveform. the true undershoot waveform can also be obtained with the following oscilloscope data file analysis: converted undershoot waveform = v tt ? signal_measured note: the converted undershoot waveform appears as a positive (overshoot) signal. note: overshoot (rising edge) and undershoot (falling edge) conditions are separate and their impact must be determined independently.
60 datasheet intel ? celeron ? processor up to 1.10 ghz after the true waveform conversion, the undershoot/overshoot specifications shown in table 38 and table 39 can be applied to the converted undershoot waveform using the same magnitude and pulse duration specifications used with an overshoot waveform. overshoot/undershoot magnitude levels must observe the absolute maximum specifications listed in table 38 and table 39 . these specifications must not be violated at any time regardless of bus activity or system state. within these specifications are threshold levels that define different allowed pulse durations. provided that the magnitude of the overshoot/undershoot is within the absolute maximum specifications (2.18v), the pulse magnitude, duration and activity factor must all be used to determine if the overshoot/undershoot pulse is within specifications. 3.4.3 overshoot/undershoot pulse duration (fc-pga/fc-pga2 packages) pulse duration describes the total time an overshoot/undershoot event exceeds the overshoot/ undershoot reference voltage (vos_ref = 1.635 v). the total time could encompass several oscillations above the reference voltage. multiple overshoot/undershoot pulses within a single overshoot/undershoot event may need to be measured to determine the total pulse duration. note: oscillations below the reference voltage can not be subtracted from the total overshoot/undershoot pulse duration. note: multiple overshoot/undershoot events occurring within the same clock cycle must be considered together as one event. using the worst case overshoot/undershoot magnitude, sum together the individual pulse durations to determine the total overshoot/undershoot pulse duration for that total event. 3.4.4 activity factor (fc-pga/fc-pga2 packages) activity factor (af) describes the frequency of overshoot (or undershoot) occurrence relative to a clock. since the highest frequency of assertion of an agtl+ or a cmos signal is every other clock, an af = 1 indicates that the specific overshoot (or undershoot) waveform occurs every other clock cycle. thus, an af = 0.01 indicates that the specific overshoot (or undershoot) waveform occurs one time in every 200 clock cycles. the specifications provided in table 38 and table 39 show the maximum pulse duration allowed for a given overshoot/undershoot magnitude at a specific activity factor. each table entry is independent of all others, meaning that the pulse duration reflects the existence of overshoot/ undershoot events of that magnitude only. a platform with an overshoot/undershoot that just meets the pulse duration for a specific magnitude where the af < 1, means that there can be no other overshoot/undershoot events, even of lesser magnitude (note that if af = 1, then the event occurs at all times and no other events can occur). note: activity factor for agtl+ signals is referenced to bclk frequency. note: activity factor for cmos signals is referenced to picclk frequency.
datasheet 61 intel ? celeron ? processor up to 1.10 ghz 3.4.5 reading overshoot/undershoot specification tables (fc-pga/ fc-pga2 packages) the overshoot/undershoot specification for the fc-pga/fc-pga2 packages processor is not a simple single value. instead, many factors are needed to determine the over/undershoot specification. in addition to the magnitude of the overshoot, the following parameters must also be known: the junction temperature the processor will be operating, the width of the overshoot (as measured above 1.635 v) and the activity factor (af). to determine the allowed overshoot for a particular overshoot event, the following must be done: 1. determine the signal group that particular signal falls into. if the signal is an agtl+ signal operating with a 66 mhz system bus, use table 38 (66 mhz agtl+ signal group). if the signal is a cmos signal, use table 39 (33 mhz cmos signal group). 2. determine the maximum junction temperature (tj) for the range of processors that the system will support (80 o c or 90 o c). 3. determine the magnitude of the overshoot (relative to v ss ) 4. determine the activity factor (how often does this overshoot occur?) 5. from the appropriate specification table, read off the maximum pulse duration (in ns) allowed. 6. compare the specified maximum pulse duration to the signal being measured. if the pulse duration measured is less than the pulse duration shown in the table, then the signal meets the specifications. the above procedure is similar for undershoots after the undershoot waveform has been converted to look like an overshoot. undershoot events must be analyzed separately from overshoot events as they are mutually exclusive. table 37 shows an example of how the maximum pulse duration is determined for a given waveform. notes: 1. corresponding maximum pulse duration specification ? 3.2 ns 2. pulse duration (measured) ? 2.0 ns given the above parameters, and using table 38 (90 o c/af=0.1 column) the maximum allowed pulse duration is 3.2 ns. since the measured pulse duration is 2.0ns, this particular overshoot event passes the overshoot specifications, although this doesn't guarantee that the combined overshoot/ undershoot events meet the specifications. table 37. example platform information required information maximum platform support notes fsb signal group 66 mhz agtl+ max tj 90 c overshoot magnitude 2.13v measured value activity factor (af) 0.1 measured overshoot occurs on average every 20 clocks
62 datasheet intel ? celeron ? processor up to 1.10 ghz 3.4.6 determining if a system meets the overshoot/undershoot specifications (fc-pga/fc-pga2 packages) the overshoot/undershoot specifications listed in the following tables specify the allowable overshoot/undershoot for a single overshoot/undershoot event. however most systems will have multiple overshoot and/or undershoot events that each have their own set of parameters (duration, af and magnitude). while each overshoot on its own may meet the overshoot specification, when the total impact of all overshoot events is accounted for, the system may fail. a guideline to ensure a system passes the overshoot and undershoot specifications is shown below. it is important to meet these guidelines; otherwise, contact your intel field representative. 1. insure no signal (cmos or agtl+) ever exceed the 1.635 v; or 2. if only one overshoot/undershoot event magnitude occurs, ensure it meets the over/undershoot specifications in the following tables; or 3. if multiple overshoots and/or multiple undershoots occur, measure the worst case pulse duration for each magnitude and compare the results against the af = 1 specifications. if all of these worst case overshoot or undershoot events meet the specifications (measured time < specifications) in the table (where af=1), then the system passes. the following notes apply to table 38 and table 39 . notes: 1. overshoot/undershoot magnitude = 2.18 v is an absolute value and should never be exceeded 2. overshoot is measured relative to v ss 3. undershoot is measured relative to v tt 4. overshoot/undershoot pulse duration is measured relative to 1.635 v. 5. ringbacks below v tt can not be subtracted from overshoots/undershoots. 6. lesser undershoot does not allocate longer or larger overshoot. 7. consult the appropriate layout guidelines provided in the specific platform design guide. 8. all values specified by design characterization. notes: 1. bclk period is 30.0 ns. 2. measurements taken at the processor socket pins on the solder-side of the motherboard. table 38. 66 mhz agtl+ signal group overshoot/undershoot tolerance at processor pins (fc-pga/fc-pga2 packages) overshoot/ undershoot magnitude maximum pulse duration at tj = 80 c (ns) maximum pulse duration at tj = 90 c (ns) af = 0.01 af = 0.1 af = 1 af = 0.01 af = 0.1 af = 1 2.18 v 30 3.8 0.38 18 1.8 0.18 2.13 v 30 7.4 0.74 30 3.2 0.32 2.08 v 30 13.6 1.36 30 6.4 0.64 2.03 v 30 25 2.5 30 12 1.1 1.98 v 30 30 4.56 30 22 2 1.93 v 30 30 8.2 30 30 3.8 1.88 v 30301530306.8
datasheet 63 intel ? celeron ? processor up to 1.10 ghz notes: 1. picclk period is 30 ns. 2. measurements taken at the processor socket pins on the solder-side of the motherboard. table 39. 33 mhz cmos signal group overshoot/undershoot tolerance at processor pins (fc-pga/fc-pga2 packages) overshoot/ undershoot magnitude maximum pulse duration at tj = 80 c (ns) maximum pulse duration at tj = 90 c (ns) af = 0.01 af = 0.1 af = 1 af = 0.01 af = 0.1 af = 1 2.18 v 60 7.6 0.76 36 3.6 0.36 2.13 v 60 14.8 1.48 60 6.4 0.64 2.08 v 60 27.2 2.7 60 12.8 1.2 2.03 v 60 50 5 60 24 2.2 1.98 v 60 60 9.1 60 44 4 1.93 v 60 60 16.4 60 60 7.6 1.88 v 60 60 30 60 60 13.6 figure 15. maximum acceptable agtl+ overshoot/undershoot waveform (fc-pga/fc-pga2 packages) vss undershoot magnitude = v tt - signal overshoot magnitude = signal - vss v tt 2.18v 2.08v 1.98v 1.88v 1.635v max overshoot magnitude time dependent overshoot converted undershoot waveform undershoot magnitude time dependent undershoot
64 datasheet intel ? celeron ? processor up to 1.10 ghz 3.5 non-agtl+ signal quality specifications and measurement guidelines there are three signal quality parameters defined for non-agtl+ signals: overshoot/undershoot, ringback, and settling limit. all three signal quality parameters are shown in figure 16 for the non- agtl+ signal group. notes: 1. v hi = 1.5 v for all non-agtl+ signals except for bclk, picclk, and pwrgood. v hi = 2.5 v for bclk, picclk, and pwrgood. bclk and picclk signal quality is detailed in section 3.1 . figure 16. non-agtl+ overshoot/undershoot, settling limit, and ringback 1 undershoot overshoot settling limit settling limit rising-edge ringback falling-edge ringback v lo v ss time v hi
datasheet 65 intel ? celeron ? processor up to 1.10 ghz 4.0 thermal specifications and design considerations this section provides needed data for designing a thermal solution. however, for the correct thermal measuring processes, refer to ap-905, intel ? pentium ? iii processor thermal design guidelines (order number 245087). for the fc-pga/fc-pga2 using flip chip pin grid array packaging technology, intel specifies the junction temperature (t junction ). for the s.e.p. package and ppga package, intel specifies the case temperature (t case ). 4.1 thermal specifications table 40 provides both the processor power and heatsink design target for celeron processors. processor power is defined as the total power dissipated by the processor core and its package. therefore, the s.e.p. package?s processor power would also include power dissipated by the agtl+ termination resistors. the overall system chassis thermal design must comprehend the entire processor power. the heatsink design target consists of only the processor core, which dissipates the majority of the thermal power. systems should design for the highest possible thermal power, even if a processor with a lower thermal dissipation is planned. the processor?s heatslug is the attach location for all thermal solutions. the maximum and minimum case temperatures are also specified in table 40 . a thermal solution should be designed to ensure the temperature of the case never exceeds these specifications. refer to the intel developer web site at http://developer.intel.com for more information.
66 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. these values are specified at nominal v cc core for the processor core. 2. thermal design power (tdp) represents the maximum amount of power the thermal solution is required to dissipate. the thermal solution should be designed to dissipate the tdp power without exceeding the maximum t junction specification. 3. fc-pga package only. 4. the thermal design power (tdp) celeron ? processors in production has been redefined. the updated tdp values are based on device characterization and do not reflect any silicon design changes to lower processor power consumption. the tdp values represent the thermal design point required to cool celeron ? processors in the platform environment while executing thermal validation type software. 5. power density is the maximum power the processor die can dissipate (i.e., processor power) divided by the die area over which the power is generated. power for these processors is generated from the core area shown in figure 17 . 6. t junctionoffset is the worst-case difference between the thermal reading from the on-die thermal diode and the hottest location on the processor?s core. t junctionoffset values do not include any thermal diode kit measurement error. diode kit measurement error must be added to the t junctionoffset value from the table. intel has characterized the use of the analog devices ad1021 diode measurement kit and found its measurement error to be 1 o c . 7. for processors with a cpuid of 0683h, the tdp number is 11.2 w. 8. for processors with a cpuid of 0683h, the tdp number is 11.9 w. 9. for processors with a cpuid of 0683h, the tdp number is 12.6 w. 10.the tj min for processors with a cpuid of 068x is 0 o c with a 3 o c? 5 o c margin error. table 40. processor power for the ppga and fc-pga packages processor core frequency l2 cache size (kb) processor thermal design power 2,3 (w) up to cpuid 0686h processor thermal design power 2,3 (w) for cpuid 068ah power density 5 (w/cm 2 ) for cpuid 0686h power density 5 (w/cm 2 ) for cpuid 068ah min t case (c) max t case (c) max 10 t junction (c) t junction offset 6 (c) 333 mhz 128 19.7 na na na 5 85 na na 366 mhz 128 21.7 na na na 5 85 na na 400 mhz 128 23.7 na na na 5 85 na na 433 mhz 128 24.1 na na na 5 85 na na 466 mhz 128 25.6 na na na 5 70 na na 500 mhz 128 27.0 na na na 5 70 na na 533 mhz 128 28.3 na na na 5 70 na na 533a 3 mhz 128 14.0 4,7 na 17.5 4 na na na 90 2.6 566 3 mhz 128 14.9 4,8 19.2 18.5 4 30 4 na na 90 2.6 600 3 mhz 128 15.8 4,9 19.6 4 19.7 4 30.5 4 na na 90 2.6 633 mhz 128 16.5 4 20.2 4 25.8 4 31.5 4 na na 82 2.6 667 mhz 128 17.5 4 21.1 4 27.3 4 32.9 4 na na 82 2.6 700 mhz 128 18.3 4 21.9 4 28.6 4 34.1 4 na na 80 2.7 733 mhz 128 19.1 4 22.8 4 29.8 4 35.5 4 na na 80 2.8 766 mhz 128 20.0 4 23.6 4 31.3 4 36.8 4 na na 80 3.0 800 mhz 128 20.8 4 24.5 4 32.6 4 38.2 4 na na 80 3.0 850 mhz 128 22.5 4 25.7 4 35.2 4 40.0 4 na na 80 3.3 900 mhz 128 na 26.7 4 na 41.6 4 na na 77 3.6 950 mhz 128 na 28.0 na 43.6 4 na na 79 3.8 1 ghz 128 na 29.0 na 45.2 4 na na 75 3.8 1.10 ghz 128 na 33.0 na 51.4 4 na na 77 4.4
datasheet 67 intel ? celeron ? processor up to 1.10 ghz notes: 1. these values are specified at nominal v cc core for the processor pins. 2. thermal design power (tdp) represents the maximum amount of power the thermal solution is required to dissipate. the thermal solution should be designed to dissipate the tdp power without exceeding the maximum tcase specification. 3. tdp does not represent the power delivery and voltage regulation requirements for the processor. refer to table 5 for voltage regulation and electrical specifications. 4. t caseoffset is the worst-case difference between the maximum case temperature and the thermal diode temperature on the processor?s core. for more information refer to the document, intel ? pentium ? iii processor in the fc-pga2 package thermal design guide. 5. this processor exists in both fc-pga and fc-pga2 packages. figure 17 is a block diagram of the intel celeron fc-pga/fc-pga2 processor die layout. the layout differentiates the processor core from the cache die area. in effect, the thermal design power identified in table 40 is dissipated entirely from the processor core area. thermal solution designs should compensate for this smaller heat flux area and not assume that the power is uniformly distributed across the entire die area. 1. for cpuid 0x68a, the die area is 0.94 cm 2 , the cache area is 0.30 cm 2 , and the core area is 0.64 cm 2 . table 41. intel ? celeron ? processor for the fc-pga2 package thermal design power 1 processor processor core frequency (mhz) system bus frequency (mhz) processor thermal design power 2,3 cpuid 068ah (w) maximum t case 4 (c) additional notes 900 900 100 30.0 72 5 950 950 100 32.0 72 5 1 ghz 1000 100 33.9 69 5 figure 17. processor functional die layout (cpuid 0686h) (1) cache area 0.04 in 2 0.337? 0.275? 0.146? 0.414? core area 0.10 in 2 die area 0.14 in 2 die area = 0.90 cm 2 cache area = 0.26 cm 2 core area = 0.64 cm 2 figure 18. processor functional die layout (up to cpuid 0683h) cache area 0.05 in 2 0.362? 0.292? 0.170? 0.448? core area 0.11 in 2 die area 0.16 in 2 die area = 1.05 cm 2 cache area = 0.32 cm 2 core area = 0.73 cm 2
68 datasheet intel ? celeron ? processor up to 1.10 ghz 4.1.1 thermal diode the celeron processor incorporates an on-die diode that can be used to monitor the die temperature. a thermal sensor located on the motherboard or a standalone measurement kit may monitor the die temperature of the intel celeron processor for thermal management purposes. table 42 to table 44 provide the diode parameter and interface specifications. note: the reading of the thermal sensor connected to the thermal diode will not necessarily reflect the temperature of the hottest location on the die. this is due to inaccuracies in the thermal sensor, on- die temperature gradients between the location of the thermal diode and the hottest location on the die at a given point in time, and time based variations in the die temperature measurement. time based variations can occur when the sampling rate of the thermal diode (by the thermal sensor) is slower than the rate at which the t junction temperature can change. notes: 1. intel does not support or recommend operation of the thermal diode under reverse bias. 2. at room temperature with a forward bias of 630 mv. 3. n_ideality is the diode ideality factor parameter, as represented by the diode equation: i-io(e (vd*q)/(nkt) ? 1). 4. not 100% tested. specified by design characterization. notes: 1. intel does not support or recommend operation of the thermal diode under reverse bias. 2. characterized at 100 c with a forward bias current of 5?300 a. 3. the ideality factor, n, represents the deviation from ideal diode behavior as exemplified by the diode equation: i fw =is(e^ ((vd*q)/(nkt)) ? 1), where is = saturation current, q = electronic charge, vd = voltage across the diode, k = boltzmann constant, and t = absolute temperature (kelvin). 4. not 100% tested. specified by design characterization. table 42. thermal diode parameters (s.e.p. and ppga packages) symbol min typ max unit notes i forward bias 5 500 ua 1 n_ideality 1.0000 1.0065 1.0173 2,3 table 43. thermal diode parameters (fc-pga/fc-pga2 packages) symbol min typ max unit notes i forward bias 5 300 ua 1 n_ideality 1.0057 1.0080 1.0125 2, 3 table 44. thermal diode interface pin name sc242 connector signal # 370-pin socket pin # pin description thermdp b14 al31 diode anode (p junction) thermdn b15 al29 diode cathode (n junction)
datasheet 69 intel ? celeron ? processor up to 1.10 ghz 5.0 mechanical specifications there are three package technologies which celeron processors use. they are the s.e.p. package, the ppga package, and the fc-pga/fc-pga2 packages. the s.e.p. package and fc-pga/ fc-pga2 packages contain the processor core and passive components, while the ppga package does not have passive components. the processor edge connector defined in this document is referred to as the ?sc242 connector.? see the sc242 design guidelines (order number 243397) for further details on the edge connector. the processor socket connector is defined in this document is referred to as the ?370-pin socket.? see the 370-pin socket (pga370) design guidelines (order number 244410) for further details on the socket. 5.1 s.e.p. package this section defines the mechanical specifications and signal definitions for the celeron processor in the s.e.p. package. 5.1.1 materials information the celeron processor requires a retention mechanism. this retention mechanism may require motherboard holes to be 0.159" diameter if low cost plastic fasteners are used to secure the retention mechanisms. the larger diameter holes are necessary to provide a robust structural design that can shock and vibe testing. if captive nuts are used in place of the plastic fasteners, then either the 0.159" or the 0.140" diameter holes will suffice as long as the attach mount is used. figure 19 with substrate dimensions is provided to aid in the design of a heatsink and clip. in figure 20 all area on the secondary side of the substrate is zoned ?keepout?, except for 25 mils around the tooling holes and the top and side edges of the substrate.
70 datasheet intel ? celeron ? processor up to 1.10 ghz 5.1.2 signal listing (s.e.p. package) table 45 and table 46 provide the processor edge finger and sc242 connector signal definitions for celeron processor. the signal locations on the sc242 edge connector are to be used for signal routing, simulation, and component placement on the motherboard. figure 19. processor substrate dimensions (s.e.p. package) figure 20. processor substrate primary/secondary side dimensions (s.e.p. package) -y- 1.660 .615 1.196 3.804 .814 .323 2.608 1.370 -y- 27.4 mm sr opening square 25.4 mm copper slug square -z- -y- .062 +.007 -.005 -e- -d- -g- -h- -e- -d- -g- -h- typ max. non-keepout area .025 typ max. non-keepout ar e .025 typ max. non-keepout area .025 typ max. non-keepout area .025 secondary side primary side there will be no components on secodonary side
datasheet 71 intel ? celeron ? processor up to 1.10 ghz table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type a1 v tt power/other a2 v ss power/other a3 v tt power/other a4 ierr# cmos output a5 a20m# cmos input a6 v ss power/other a7 ferr# cmos output a8 ignne# cmos input a9 tdi tap input a10 v ss power/other a11 tdo tap output a12 pwrgood cmos input a13 testhi cmos test input a14 v ss power/other a15 thermtrip# cmos output a16 reserved reserved for future use a17 lint0/intr cmos input a18 v ss power/other a19 picd0 apic i/o a20 preq# cmos input a21 bp3# agtl+ i/o a22 v ss power/other a23 bpm0# agtl+ i/o a24 reserved reserved for pentium ii processor a25 reserved reserved for pentium ii processor a26 v ss power/other a27 reserved reserved for pentium ii processor a28 reserved reserved for pentium ii processor a29 reserved reserved for pentium ii processor a30 v ss power/other a31 reserved reserved for pentium ii processor a32 d61# agtl+ i/o a33 d55# agtl+ i/o a34 v ss power/other a35 d60# agtl+ i/o a36 d53# agtl+ i/o a37 d57# agtl+ i/o a38 v ss power/other a39 d46# agtl+ i/o a40 d49# agtl+ i/o a41 d51# agtl+ i/o a42 v ss power/other a43 d42# agtl+ i/o a44 d45# agtl+ i/o a45 d39# agtl+ i/o a46 v ss power/other a47 reserved reserved for future use a48 d43# agtl+ i/o a49 d37# agtl+ i/o a50 v ss power/other a51 d33# agtl+ i/o a52 d35# agtl+ i/o a53 d31# agtl+ i/o a54 v ss power/other a55 d30# agtl+ i/o a56 d27# agtl+ i/o a57 d24# agtl+ i/o a58 v ss power/other a59 d23# agtl+ i/o a60 d21# agtl+ i/o a61 d16# agtl+ i/o a62 v ss power/other a63 d13# agtl+ i/o a64 d11# agtl+ i/o a65 d10# agtl+ i/o a66 v ss power/other a67 d14# agtl+ i/o a68 d9# agtl+ i/o a69 d8# agtl+ i/o a70 v ss power/other a71 d5# agtl+ i/o table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type
72 datasheet intel ? celeron ? processor up to 1.10 ghz a72 d3# agtl+ i/o a73 d1# agtl+ i/o a74 v ss power/other a75 bclk system bus clock input a76 reserved reserved for pentium ii processor a77 reserved reserved for pentium ii processor a78 v ss power/other a79 reserved reserved for pentium ii processor a80 reserved reserved for pentium ii processor a81 a30# agtl+ i/o a82 v ss power/other a83 a31# agtl+ i/o a84 a27# agtl+ i/o a85 a22# agtl+ i/o a86 v ss power/other a87 a23# agtl+ i/o a88 reserved reserved for future use a89 a19# agtl+ i/o a90 v ss power/other a91 a18# agtl+ i/o a92 a16# agtl+ i/o a93 a13# agtl+ i/o a94 v ss power/other a95 a14# agtl+ i/o a96 a10# agtl+ i/o a97 a5# agtl+ i/o a98 v ss power/other a99 a9# agtl+ i/o a100 a4# agtl+ i/o a101 bnr# agtl+ i/o a102 v ss power/other a103 bpri# agtl+ input a104 trdy# agtl+ input a105 defer# agtl+ input a106 v ss power/other table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type a107 req2# agtl+ i/o a108 req3# agtl+ i/o a109 hitm# agtl+ i/o a110 v ss power/other a111 dbsy# agtl+ i/o a112 rs1# agtl+ input a113 reserved reserved for future use a114 v ss power/other a115 ads# agtl+ i/o a116 reserved reserved for future use a117 reserved reserved for pentium ii processor a118 v ss power/other a119 vid2 power/other a120 vid1 power/other a121 vid4 power/other b1 emi power/other b2 flush# cmos input b3 smi# cmos input b4 init# cmos input b5 v tt power/other b6 stpclk# cmos input b7 tck tap input b8 slp# cmos input b9 v tt power/other b10 tms tap input b13 v cc core power/other b14 thermdp power/other b15 thermdn power/other b16 lint1/nmi cmos input b17 v cc core power/other b18 picclk apic clock input b19 bp2# agtl+ i/o b20 reserved reserved for future use b21 bsel power/other b22 picd1 apic i/o b23 prdy# agtl+ output b24 bpm1# agtl+ i/o table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type
datasheet 73 intel ? celeron ? processor up to 1.10 ghz b25 v cc core power/other b26 reserved reserved for pentium ii processor b27 reserved reserved for pentium ii processor b28 reserved reserved for pentium ii processor b29 v cc core power/other b30 d62# agtl+ i/o b31 d58# agtl+ i/o b32 d63# agtl+ i/o b33 v cc core power/other b34 d56# agtl+ i/o b35 d50# agtl+ i/o b36 d54# agtl+ i/o b37 v cc core power/other b38 d59# agtl+ i/o b39 d48# agtl+ i/o b40 d52# agtl+ i/o b41 emi power/other b42 d41# agtl+ i/o b43 d47# agtl+ i/o b44 d44# agtl+ i/o b45 v cc core power/other b46 d36# agtl+ i/o b47 d40# agtl+ i/o b48 d34# agtl+ i/o b49 v cc core power/other b50 d38# agtl+ i/o b51 d32# agtl+ i/o b52 d28# agtl+ i/o b53 v cc core power/other b54 d29# agtl+ i/o b55 d26# agtl+ i/o b56 d25# agtl+ i/o b57 v cc core power/other b58 d22# agtl+ i/o b59 d19# agtl+ i/o b60 d18# agtl+ i/o table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type b61 emi power/other b62 d20# agtl+ i/o b63 d17# agtl+ i/o b64 d15# agtl+ i/o b65 v cc core power/other b66 d12# agtl+ i/o b67 d7# agtl+ i/o b68 d6# agtl+ i/o b69 v cc core power/other b70 d4# agtl+ i/o b71 d2# agtl+ i/o b72 d0# agtl+ i/o b73 v cc core power/other b74 reset# agtl+ input b75 reserved reserved for future use b76 reserved reserved for future use b77 v cc core power/other b78 reserved reserved for pentium ii processor b79 reserved reserved for pentium ii processor b80 a29# agtl+ i/o b81 emi power/other b82 a26# agtl+ i/o b83 a24# agtl+ i/o b84 a28# agtl+ i/o b85 v cc core power/other b86 a20# agtl+ i/o b87 a21# agtl+ i/o b88 a25# agtl+ i/o b89 v cc core power/other b90 a15# agtl+ i/o b91 a17# agtl+ i/o b92 a11# agtl+ i/o b93 v cc core power/other b94 a12# agtl+ i/o b95 a8# agtl+ i/o b96 a7# agtl+ i/o table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type
74 datasheet intel ? celeron ? processor up to 1.10 ghz b97 v cc core power/other b98 a3# agtl+ i/o b99 a6# agtl+ i/o b100 emi power/other b101 slotocc# power/other b102 req0# agtl+ i/o b103 req1# agtl+ i/o b104 req4# agtl+ i/o b105 v cc core power/other b106 lock# agtl+ i/o b107 drdy# agtl+ i/o b108 rs0# agtl+ input b109 v cc 5 power/other b11 trst# tap input b110 hit# agtl+ i/o b111 rs2# agtl+ input table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type b112 reserved reserved for future use b113 v cc l2 power/other. reserved for pentium ii processor b114 reserved reserved for pentium ii processor b115 reserved reserved for pentium ii processor b116 reserved reserved for pentium ii processor b117 v cc l2 power/other. reserved for pentium ii processor b118 reserved reserved for pentium ii processor b119 vid3 power/other b12 reserved reserved for future use b120 vid0 power/other b121 v cc l2 power/other. reserved for pentium ii processor table 45. s.e.p. package signal listing by pin number pin no. pin name signal buffer type
datasheet 75 intel ? celeron ? processor up to 1.10 ghz table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type a3# b98 agtl+ i/o a4# a100 agtl+ i/o a5# a97 agtl+ i/o a6# b99 agtl+ i/o a7# b96 agtl+ i/o a8# b95 agtl+ i/o a9# a99 agtl+ i/o a10# a96 agtl+ i/o a11# b92 agtl+ i/o a12# b94 agtl+ i/o a13# a93 agtl+ i/o a14# a95 agtl+ i/o a15# b90 agtl+ i/o a16# a92 agtl+ i/o a17# b91 agtl+ i/o a18# a91 agtl+ i/o a19# a89 agtl+ i/o a20# b86 agtl+ i/o a20m# a5 cmos input a21# b87 agtl+ i/o a22# a85 agtl+ i/o a23# a87 agtl+ i/o a24# b83 agtl+ i/o a25# b88 agtl+ i/o a26# b82 agtl+ i/o a27# a84 agtl+ i/o a28# b84 agtl+ i/o a29# b80 agtl+ i/o a30# a81 agtl+ i/o a31# a83 agtl+ i/o ads# a115 agtl+ i/o bclk a75 system bus clock input bnr# a101 agtl+ i/o bp2# b19 agtl+ i/o bp3# a21 agtl+ i/o bpm0# a23 agtl+ i/o bpm1# b24 agtl+ i/o bpri# a103 agtl+ input bsel b21 power/other d00# b72 agtl+ i/o d1# a73 agtl+ i/o d2# b71 agtl+ i/o d3# a72 agtl+ i/o d5# a71 agtl+ i/o d6# b68 agtl+ i/o d7# b67 agtl+ i/o d8# a69 agtl+ i/o d9# a68 agtl+ i/o d10# a65 agtl+ i/o d11# a64 agtl+ i/o d12# b66 agtl+ i/o d13# a63 agtl+ i/o d14# a67 agtl+ i/o d15# b64 agtl+ i/o d16# a61 agtl+ i/o d17# b63 agtl+ i/o d18# b60 agtl+ i/o d19# b59 agtl+ i/o d20# b62 agtl+ i/o d21# a60 agtl+ i/o d22# b58 agtl+ i/o d23# a59 agtl+ i/o d24# a57 agtl+ i/o d25# b56 agtl+ i/o d26# b55 agtl+ i/o d27# a56 agtl+ i/o d28# b52 agtl+ i/o d29# b54 agtl+ i/o d30# a55 agtl+ i/o d31# a53 agtl+ i/o d32# b51 agtl+ i/o d33# a51 agtl+ i/o d34# b48 agtl+ i/o d35# a52 agtl+ i/o table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type
76 datasheet intel ? celeron ? processor up to 1.10 ghz d36# b46 agtl+ i/o d37# a49 agtl+ i/o d38# b50 agtl+ i/o d39# a45 agtl+ i/o d4# b70 agtl+ i/o d40# b47 agtl+ i/o d41# b42 agtl+ i/o d42# a43 agtl+ i/o d43# a48 agtl+ i/o d44# b44 agtl+ i/o d45# a44 agtl+ i/o d46# a39 agtl+ i/o d47# b43 agtl+ i/o d48# b39 agtl+ i/o d49# a40 agtl+ i/o d50# b35 agtl+ i/o d51# a41 agtl+ i/o d52# b40 agtl+ i/o d53# a36 agtl+ i/o d54# b36 agtl+ i/o d55# a33 agtl+ i/o d56# b34 agtl+ i/o d57# a37 agtl+ i/o d58# b31 agtl+ i/o d59# b38 agtl+ i/o d60# a35 agtl+ i/o d61# a32 agtl+ i/o d62# b30 agtl+ i/o d63# b32 agtl+ i/o dbsy# a111 agtl+ i/o defer# a105 agtl+ input drdy# b107 agtl+ i/o emi b1 power/other emi b41 power/other emi b61 power/other emi b81 power/other emi b100 power/other table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type ferr# a7 cmos output flush# b2 cmos input hit# b110 agtl+ i/o hitm# a109 agtl+ i/o ierr# a4 cmos output ignne# a8 cmos input init# b4 cmos input lint0/intr a17 cmos input lint1/nmi b16 cmos input lock# b106 agtl+ i/o picclk b18 apic clock input picd0 a19 apic i/o picd1 b22 apic i/o prdy# b23 agtl+ output preq# a20 cmos input pwrgood a12 cmos input req0# b102 agtl+ i/o req1# b103 agtl+ i/o req2# a107 agtl+ i/o req3# a108 agtl+ i/o req4# b104 agtl+ i/o reserved a16 reserved for future use reserved a47 reserved for future use reserved a77 reserved for pentium ii processor reserved a88 reserved for future use reserved a116 reserved for future use reserved b12 reserved for future use reserved a113 reserved for future use reserved b20 reserved for future use reserved b76 reserved for future use reserved b112 reserved for future use reserved b79 reserved for pentium ii processor reserved b114 reserved for pentium ii processor reserved b115 reserved for pentium ii processor table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type
datasheet 77 intel ? celeron ? processor up to 1.10 ghz reserved a117 reserved for pentium ii processor reserved b116 reserved for pentium ii processor reserved a24 reserved for pentium ii processor reserved a76 reserved for pentium ii processor reserved b75 reserved for future use reserved a79 reserved for pentium ii processor reserved a80 reserved for pentium ii processor reserved b78 reserved for pentium ii processor reserved b118 reserved for pentium ii processor reserved a25 reserved for pentium ii processor reserved a27 reserved for pentium ii processor reserved b26 reserved for pentium ii processor reserved a28 reserved for pentium ii processor reserved b27 reserved for pentium ii processor reserved a29 reserved for pentium ii processor reserved a31 reserved for pentium ii processor reserved b28 reserved for pentium ii processor reset# b74 agtl+ input rs0# b108 agtl+ input rs1# a112 agtl+ input rs2# b111 agtl+ input slotocc# b101 power/other slp# b8 cmos input smi# b3 cmos input stpclk# b6 cmos input tck b7 tap input tdi a9 tap input tdo a11 tap output table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type testhi a13 cmos test input thermdn b15 power/other thermdp b14 power/other thermtrip# a15 cmos output tms b10 tap input trdy# a104 agtl+ input trst# b11 tap input v cc 5 b109 power/other v cc core b13 power/other v cc core b17 power/other v cc core b25 power/other v cc core b29 power/other v cc core b33 power/other v cc core b37 power/other v cc core b45 power/other v cc core b49 power/other v cc core b53 power/other v cc core b57 power/other v cc core b65 power/other v cc core b69 power/other v cc core b73 power/other v cc core b77 power/other v cc core b85 power/other v cc core b89 power/other v cc core b93 power/other v cc core b97 power/other v cc core b105 power/other v cc l2 b113 power/other. reserved for pentium ii processor v cc l2 b117 power/other. reserved for pentium ii processor v cc l2 b121 power/other. reserved for pentium ii processor vid0 b120 power/other vid1 a120 power/other vid2 a119 power/other vid3 b119 power/other vid4 a121 power/other v ss a114 power/other table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type
78 datasheet intel ? celeron ? processor up to 1.10 ghz v ss a118 power/other v ss a46 power/other v ss a38 power/other v ss a42 power/other v ss a50 power/other v ss a54 power/other v ss a58 power/other v ss a62 power/other v ss a66 power/other v ss a70 power/other v ss a74 power/other v ss a78 power/other v ss a82 power/other v ss a86 power/other v ss a2 power/other v ss a6 power/other table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type v ss a10 power/other v ss a14 power/other v ss a18 power/other v ss a22 power/other v ss a26 power/other v ss a30 power/other v ss a34 power/other v ss a98 power/other v ss a102 power/other v ss a106 power/other v ss a110 power/other v tt a1 power/other v tt a3 power/other v tt b5 power/other v tt b9 power/other table 46. s.e.p. package signal listing by signal name pin name pin no. signal buffer type
datasheet 79 intel ? celeron ? processor up to 1.10 ghz 5.2 ppga package this section defines the mechanical specifications and signal definitions for the celeron processor in the ppga packages. 5.2.1 ppga package materials information figure 21 and table 47 are provided to aid in the design of a heatsink and clip. figure 21. package dimensions (ppga package) d1 d d s1 b1 b2 heat slug solder resist d2 a1 l seating plane e1 b a a2 side view bottom view top view 45 x 0.085
80 datasheet intel ? celeron ? processor up to 1.10 ghz table 47. package dimensions (ppga package) millimeters inches symbol min max notes min max notes a 1.83 2.23 0.072 0.088 a1 1.00 0.039 a2 2.72 3.33 0.107 0.131 b 0.40 0.51 0.016 0.020 d 49.43 49.63 1.946 1.954 d1 45.59 45.85 1.795 1.805 d2 25.15 25.65 0.099 1.010 e1 2.29 2.79 0.090 0.110 l 3.05 3.30 0.120 0.130 n 370 lead count 370 lead count s1 1.52 2.54 0.060 0.100 table 48. information summary (ppga package) package type total pins pin array package size plastic staggered pin grid array (ppga) 370 37 x 37 1.95" x 1.95" 4.95 cm x 4.95 cm
datasheet 81 intel ? celeron ? processor up to 1.10 ghz 5.2.2 ppga package signal listing figure 22. ppga package (pin side view) a13# a16# an am al ak aj ah ag af ae ad ac ab aa z y x w v u t s r q p n m l k j h g f e d c b a vss vcc vss d35# d29# d33# d26# d28# d21# d23# d25# vss vcc vss d31# vcc d43# vcc vss d34# d38# vcc vss d39# d36# vcc d37# d44# vcc vcc d32# d22# rsvd d27# vss d42# d45# d49# vss vcc d63# vref1 vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss v core det rsvd d62# rsvd rsvd rsvd vref0 bpm1# bp3# d41# d52# vss vcc vss vcc vss vcc vss vcc vss vcc d40# d59# d55# d54# d58# d50# d56# rsvd rsvd rsvd bpm0# cpupres# vcc vss vcc vss vcc vss vcc vss vcc vss vcc rsvd d51# d47# d48# d57# d46# d53# d60# d61# rsvd rsvd rsvd prdy# vss bp2# rsvd rsvd vcc vss vcc picclk picd0 preq# vcc vcc vss rsvd picd1 lint1 vcc vss lint0 rsvd rsvd rsvd vss vcc vss rsvd rsvd rsvd vcc vss vcc rsvd rsvd rsvd vss vcc vss pll2 rsvd rsvd vcc vss vcc vss vcc vss vcc vss v2.5 rsvd rsvd vcc vss vcc vcmos vss ferr# rsvd vcc vss v1.5 a20m# ierr# flush# vss vcc vss init# vss vcc vss pll1 rsvd bclk stpclk# ignne# vss d16# d19# d7# d30# vcc vcc vref2 d24# d13# d20# vss vss d11# d3# d2# d14# vcc vcc d18# d9# d12# d10# vss rsvd d17# vref3 d8# d5# vcc vcc d1# d6# d4# d15# vss vss rsvd vref4 d0# rsvd vcc rsvd reset# rsvd rsvd a26# vss vss a29# a18# a27# a30# vcc vcc a24# a23# rsvd a20# vss vss a31# vref5 a17# a22# vcc vcc rsvd a25# edgctrl a19# vss vss rsvd a10# a5# a8# a4# bnr# req1# req2# rsvd rs1# vcc rs0# thermtrip# slp# vcc vss vcc a21# vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss bsel# smi# vid3 vcc vss a28# a3# a11# vref6 a14# rsvd req0# lock# vref7 rsvd pwrgd rs2# rsvd tms vcc vss vss vss a15# a9# rsvd rsvd a7# req4# req3# rsvd hitm# hit# dbsy# thrmdn thrmdp tck vid0 vid2 vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vid1 vss a12# a6# rsvd rsvd rsvd bpri# defer# rsvd rsvd trdy# drdy# br0# ads# trst# tdi tdo an am al ak aj ah ag af ae ad ac ab aa z y x w v u t s r q p n m l k j h g f e d c b a 1 2 3 4 5 6 7 8 9 10111213141516171819202122 23 24252627282930313233 34353637 1 2 3 4 5 6 7 8 9 10111213141516171819202122 23 24252627282930313233 34353637
82 datasheet intel ? celeron ? processor up to 1.10 ghz table 49. ppga package signal listing by pin number pin no. pin name signal buffer type a3 d29# agtl+ i/o a5 d28# agtl+ i/o a7 d43# agtl+ i/o a9 d37# agtl+ i/o a11 d44# agtl+ i/o a13 d51# agtl+ i/o a15 d47# agtl+ i/o a17 d48# agtl+ i/o a19 d57# agtl+ i/o a21 d46# agtl+ i/o a23 d53# agtl+ i/o a25 d60# agtl+ i/o a27 d61# agtl+ i/o a29 reserved reserved for future use a31 reserved reserved for future use a33 reserved reserved for future use a35 prdy# agtl+ output a37 v ss power/other aa1 a27# agtl+ i/o aa3 a30# agtl+ i/o aa5 v cc core power/other aa33 reserved reserved for future use aa35 reserved reserved for future use aa37 v cc core power/other ab2 v cc core power/other ab4 a24# agtl+ i/o ab6 a23# agtl+ i/o ab32 v ss power/other ab34 v cc core power/other ab36 v cc cmos power/other ac1 reserved reserved for future use ac3 a20# agtl+ i/o ac5 v ss power/other ac33 v ss power/other ac35 ferr# cmos output ac37 reserved reserved for future use ad2 v ss power/other ad4 a31# agtl+ i/o ad6 v ref 5 power/other ad32 v cc core power/other ad34 v ss power/other ad36 v cc 1.5 power/other ae1 a17# agtl+ i/o ae3 a22# agtl+ i/o ae5 v cc core power/other ae33 a20m# cmos input ae35 ierr# cmos output ae37 flush# cmos input af2 v cc core power/other af4 reserved reserved for future use af6 a25# agtl+ i/o af32 v ss power/other af34 v cc core power/other af36 v ss power/other ag1 edgctrl power/other ag3 a19# agtl+ i/o ag5 v ss power/other ag33 init# cmos input ag35 stpclk# cmos input ag37 ignne# cmos input ah2 v ss power/other ah4 reserved reserved for future use ah6 a10# agtl+ i/o ah8 a5# agtl+ i/o ah10 a8# agtl+ i/o ah12 a4# agtl+ i/o ah14 bnr# agtl+ i/o ah16 req1# agtl+ i/o ah18 req2# agtl+ i/o ah20 reserved reserved for future use ah22 rs1# agtl+ input ah24 v cc core power/other ah26 rs0# agtl+ input ah28 thermtrip# cmos output ah30 slp# cmos input table 49. ppga package signal listing by pin number pin no. pin name signal buffer type
datasheet 83 intel ? celeron ? processor up to 1.10 ghz ah32 v cc core power/other ah34 v ss power/other ah36 v cc core power/other aj01 a21# agtl+ i/o aj03 v ss power/other aj05 v cc core power/other aj07 v ss power/other aj09 v cc core power/other aj11 v ss power/other aj13 v cc core power/other aj15 v ss power/other aj17 v cc core power/other aj19 v ss power/other aj21 v cc core power/other aj23 v ss power/other aj25 v cc core power/other aj27 v ss power/other aj29 v cc core power/other aj31 v ss power/other aj33 bsel power/other aj35 smi# cmos input aj37 vid3 power/other ak02 v cc core power/other ak04 v ss power/other ak06 a28# agtl+ i/o ak08 a3# agtl+ i/o ak10 a11# agtl+ i/o ak12 v ref 6 power/other ak14 a14# agtl+ i/o ak16 reserved reserved for future use ak18 req0# agtl+ i/o ak20 lock# agtl+ i/o ak22 v ref 7 power/other ak24 reserved reserved for future use ak26 pwrgood cmos input ak28 rs2# agtl+ input ak30 reserved reserved for future use ak32 tms tap input table 49. ppga package signal listing by pin number pin no. pin name signal buffer type ak34 v cc core power/other ak36 v ss power/other al01 v ss power/other al03 v ss power/other al05 a15# agtl+ i/o al07 a13# agtl+ i/o al09 a9# agtl+ i/o al11 reserved reserved for future use al13 reserved reserved for future use al15 a7# agtl+ i/o al17 req4# agtl+ i/o al19 req3# agtl+ i/o al21 reserved reserved for future use al23 hitm# agtl+ i/o al25 hit# agtl+ i/o al27 dbsy# agtl+ i/o al29 thermdn power/other al31 thermdp power/other al33 tck tap input al35 vid0 voltage identification al37 vid2 voltage identification am04 v cc core power/other am06 v ss power/other am08 v cc core power/other am10 v ss power/other am12 v cc core power/other am14 v ss power/other am16 v cc core power/other am18 v ss power/other am2 v ss power/other am20 v cc core power/other am22 v ss power/other am24 v cc core power/other am26 v ss power/other am28 v cc core power/other am30 v ss power/other am32 v cc core power/other am34 v ss power/other table 49. ppga package signal listing by pin number pin no. pin name signal buffer type
84 datasheet intel ? celeron ? processor up to 1.10 ghz am36 vid1 voltage identification an3 v ss power/other an5 a12# agtl+ i/o an7 a16# agtl+ i/o an9 a6# agtl+ i/o an11 reserved reserved for future use an13 reserved reserved for future use an15 reserved reserved for future use an17 bpri# agtl+ input an19 defer# agtl+ input an21 reserved reserved for future use an23 reserved reserved for future use an25 trdy# agtl+ input an27 drdy# agtl+ i/o an29 br0# agtl+ i/o an31 ads# agtl+ i/o an33 trst# tap input an35 tdi tap input an37 tdo tap output b2 d35# agtl+ i/o b4 v ss power/other b6 v cc core power/other b8 v ss power/other b10 v cc core power/other b12 v ss power/other b14 v cc core power/other b16 v ss power/other b18 v cc core power/other b20 v ss power/other b22 v cc core power/other b24 v ss power/other b26 v cc core power/other b28 v ss power/other b30 v cc core power/other b32 v ss power/other b34 v cc core power/other b36 reserved reserved for future use c1 d33# agtl+ i/o table 49. ppga package signal listing by pin number pin no. pin name signal buffer type c3 v cc core power/other c5 d31# agtl+ i/o c7 d34# agtl+ i/o c9 d36# agtl+ i/o c11 d45# agtl+ i/o c13 d49# agtl+ i/o c15 d40# agtl+ i/o c17 d59# agtl+ i/o c19 d55# agtl+ i/o c21 d54# agtl+ i/o c23 d58# agtl+ i/o c25 d50# agtl+ i/o c27 d56# agtl+ i/o c29 reserved reserved for future use c31 reserved reserved for future use c33 reserved reserved for future use c35 bpm0# agtl+ i/o c37 cpupres# power/other d2 v ss power/other d4 v ss power/other d6 v cc core power/other d8 d38# agtl+ i/o d10 d39# agtl+ i/o d12 d42# agtl+ i/o d14 d41# agtl+ i/o d16 d52# agtl+ i/o d18 v ss power/other d20 v cc core power/other d22 v ss power/other d24 v cc core power/other d26 v ss power/other d28 v cc core power/other d30 v ss power/other d32 v cc core power/other d34 v ss power/other d36 v cc core power/other e1 d26# agtl+ i/o e3 d25# agtl+ i/o table 49. ppga package signal listing by pin number pin no. pin name signal buffer type
datasheet 85 intel ? celeron ? processor up to 1.10 ghz e5 v cc core power/other e7 v ss power/other e9 v cc core power/other e11 v ss power/other e13 v cc core power/other e15 v ss power/other e17 v cc core power/other e19 v ss power/other e21 v core det power/other e23 reserved reserved for future use e25 d62# power/other e27 reserved reserved for future use e29 reserved reserved for future use e31 reserved reserved for future use e33 v ref 0 power/other e35 bpm1# agtl+ i/o e37 bp3# agtl+ i/o f2 v cc core power/other f4 v cc core power/other f6 d32# agtl+ i/o f8 d22# agtl+ i/o f10 reserved reserved for future use f12 d27# agtl+ i/o f14 v cc core power/other f16 d63# agtl+ i/o f18 v ref 1 power/other f20 v ss power/other f22 v cc core power/other f24 v ss power/other f26 v cc core power/other f28 v ss power/other f30 v cc core power/other f32 v ss power/other f34 v cc core power/other f36 v ss power/other g1 d21# agtl+ i/o g3 d23# agtl+ i/o g5 v ss power/other table 49. ppga package signal listing by pin number pin no. pin name signal buffer type g33 bp2# agtl+ i/o g35 reserved reserved for future use g37 reserved reserved for future use h2 v ss power/other h4 d16# agtl+ i/o h6 d19# agtl+ i/o h32 v cc core power/other h34 v ss power/other h36 v cc core power/other j1 d7# agtl+ i/o j3 d30# agtl+ i/o j5 v cc core power/other j33 picclk apic clock input j35 picd0 apic i/o j37 preq# cmos input k2 v cc core power/other k4 v ref 2 power/other k6 d24# agtl+ i/o k32 v cc core power/other k34 v cc core power/other k36 v ss power/other l1 d13# agtl+ i/o l3 d20# agtl+ i/o l5 v ss power/other l33 reserved reserved for future use l35 picd1 apic i/o l37 lint1/nmi cmos input m2 v ss power/other m4 d11# agtl+ i/o m6 d3# agtl+ i/o m32 v cc core power/other m34 v ss power/other m36 lint0/intr cmos input n1 d2# agtl+ i/o n3 d14# agtl+ i/o n5 v cc core power/other n33 reserved reserved for future use n35 reserved reserved for future use table 49. ppga package signal listing by pin number pin no. pin name signal buffer type
86 datasheet intel ? celeron ? processor up to 1.10 ghz n37 reserved reserved for future use p2 v cc core power/other p4 d18# agtl+ i/o p6 d9# agtl+ i/o p32 v ss power/other p34 v cc core power/other p36 v ss power/other q1 d12# agtl+ i/o q3 d10# agtl+ i/o q5 v ss power/other q33 reserved reserved for future use q35 reserved reserved for future use q37 reserved reserved for future use r2 reserved reserved for future use r4 d17# agtl+ i/o r6 v ref 3 power/other r32 v cc core power/other r34 v ss power/other r36 v cc core power/other s1 d8# agtl+ i/o s3 d5# agtl+ i/o s5 v cc core power/other s33 reserved reserved for future use s35 reserved reserved for future use s37 reserved reserved for future use t2 v cc core power/other t4 d1# agtl+ i/o t6 d6# agtl+ i/o t32 v ss power/other t34 v cc core power/other t36 v ss power/other u1 d4# agtl+ i/o u3 d15# agtl+ i/o table 49. ppga package signal listing by pin number pin no. pin name signal buffer type u5 v ss power/other u33 pll2 power/other u35 reserved reserved for future use u37 reserved reserved for future use v2 v ss power/other v4 reserved reserved for future use v6 v ref 4 power/other v32 v cc core power/other v34 v ss power/other v36 v cc core power/other w1 d0# agtl+ i/o w3 reserved reserved for future use w5 v cc core power/other w33 pll1 power/other w35 reserved reserved for future use w37 bclk system bus clock input x2 reserved reserved for future use x4 reset# agtl+ input x6 reserved reserved for future use x32 v ss power/other x34 v cc core power/other x36 v ss power/other y1 reserved reserved for future use y3 a26# agtl+ i/o y5 v ss power/other y33 v ss power/other y35 v cc core power/other y37 v ss power/other z2 v ss power/other z4 a29# agtl+ i/o z6 a18# agtl+ i/o z32 v cc core power/other z34 v ss power/other z36 v cc 2.5 power/other table 49. ppga package signal listing by pin number pin no. pin name signal buffer type
datasheet 87 intel ? celeron ? processor up to 1.10 ghz table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type a3# ak8 agtl+ i/o a4# ah12 agtl+ i/o a5# ah8 agtl+ i/o a6# an9 agtl+ i/o a7# al15 agtl+ i/o a8# ah10 agtl+ i/o a9# al9 agtl+ i/o a10# ah6 agtl+ i/o a11# ak10 agtl+ i/o a12# an5 agtl+ i/o a13# al7 agtl+ i/o a14# ak14 agtl+ i/o a15# al5 agtl+ i/o a16# an7 agtl+ i/o a17# ae1 agtl+ i/o a18# z6 agtl+ i/o a19# ag3 agtl+ i/o a20# ac3 agtl+ i/o a21# aj1 agtl+ i/o a22# ae3 agtl+ i/o a23# ab6 agtl+ i/o a24# ab4 agtl+ i/o a25# af6 agtl+ i/o a26# y3 agtl+ i/o a27# aa1 agtl+ i/o a28# ak6 agtl+ i/o a29# z4 agtl+ i/o a30# aa3 agtl+ i/o a31# ad4 agtl+ i/o a20m# ae33 cmos input ads# an31 agtl+ i/o bclk w37 system bus clock input bnr# ah14 agtl+ i/o bp2# g33 agtl+ i/o bp3# e37 agtl+ i/o bpm0# c35 agtl+ i/o bpm1# e35 agtl+ i/o bpri# an17 agtl+ input br0# an29 agtl+ i/o bsel aj33 power/other cpupres# c37 power/other d0# w1 agtl+ i/o d1# t4 agtl+ i/o d2# n1 agtl+ i/o d3# m6 agtl+ i/o d4# u1 agtl+ i/o d5# s3 agtl+ i/o d6# t6 agtl+ i/o d7# j1 agtl+ i/o d8# s1 agtl+ i/o d9# p6 agtl+ i/o d10# q3 agtl+ i/o d11# m4 agtl+ i/o d12# q1 agtl+ i/o d13# l1 agtl+ i/o d14# n3 agtl+ i/o d15# u3 agtl+ i/o d16# h4 agtl+ i/o d17# r4 agtl+ i/o d18# p4 agtl+ i/o d19# h6 agtl+ i/o d20# l3 agtl+ i/o d21# g1 agtl+ i/o d22# f8 agtl+ i/o d23# g3 agtl+ i/o d24# k6 agtl+ i/o d25# e3 agtl+ i/o d26# e1 agtl+ i/o d27# f12 agtl+ i/o d28# a5 agtl+ i/o d29# a3 agtl+ i/o d30# j3 agtl+ i/o d31# c5 agtl+ i/o d32# f6 agtl+ i/o d33# c1 agtl+ i/o d34# c7 agtl+ i/o d35# b2 agtl+ i/o d36# c9 agtl+ i/o d37# a9 agtl+ i/o d38# d8 agtl+ i/o table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type
88 datasheet intel ? celeron ? processor up to 1.10 ghz d39# d10 agtl+ i/o d40# c15 agtl+ i/o d41# d14 agtl+ i/o d42# d12 agtl+ i/o d43# a7 agtl+ i/o d44# a11 agtl+ i/o d45# c11 agtl+ i/o d46# a21 agtl+ i/o d47# a15 agtl+ i/o d48# a17 agtl+ i/o d49# c13 agtl+ i/o d50# c25 agtl+ i/o d51# a13 agtl+ i/o d52# d16 agtl+ i/o d53# a23 agtl+ i/o d54# c21 agtl+ i/o d55# c19 agtl+ i/o d56# c27 agtl+ i/o d57# a19 agtl+ i/o d58# c23 agtl+ i/o d59# c17 agtl+ i/o d60# a25 agtl+ i/o d61# a27 agtl+ i/o d62# e25 agtl+ i/o d63# f16 agtl+ i/o dbsy# al27 agtl+ i/o defer# an19 agtl+ input drdy# an27 agtl+ i/o edgctrl ag1 power/other ferr# ac35 cmos output flush# ae37 cmos input hit# al25 agtl+ i/o hitm# al23 agtl+ i/o ierr# ae35 cmos output ignne# ag37 cmos input init# ag33 cmos input lint0/intr m36 cmos input lint1/nmi l37 cmos input lock# ak20 agtl+ i/o picclk j33 apic clock input table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type picd0 j35 apic i/o picd1 l35 apic i/o pll1 w33 power/other pll2 u33 power/other prdy# a35 agtl+ output preq# j37 cmos input pwrgood ak26 cmos input req0# ak18 agtl+ i/o req1# ah16 agtl+ i/o req2# ah18 agtl+ i/o req3# al19 agtl+ i/o req4# al17 agtl+ i/o reserved ac1 reserved for future use reserved ac37 reserved for future use reserved af4 reserved for future use reserved ak16 reserved for future use reserved ak24 reserved for future use reserved ak30 reserved for future use reserved al11 reserved for future use reserved al13 reserved for future use reserved al21 reserved for future use reserved an11 reserved for future use reserved an13 reserved for future use reserved an15 reserved for future use reserved an21 reserved for future use reserved an23 reserved for future use reserved b36 reserved for future use reserved c29 reserved for future use reserved c31 reserved for future use reserved c33 reserved for future use reserved e23 reserved for future use reserved e29 reserved for future use reserved e31 reserved for future use reserved f10 reserved for future use reserved g35 reserved for future use reserved g37 reserved for future use reserved l33 reserved for future use reserved n33 reserved for future use reserved n35 reserved for future use reserved n37 reserved for future use table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type
datasheet 89 intel ? celeron ? processor up to 1.10 ghz reserved q33 reserved for future use reserved q35 reserved for future use reserved q37 reserved for future use reserved s33 reserved for future use reserved s37 reserved for future use reserved u35 reserved for future use reserved u37 reserved for future use reserved v4 reserved for future use reserved w3 reserved for future use reserved w35 reserved for future use reserved ah20 reserved for future use reserved ah4 reserved for future use reserved a29 reserved for future use reserved a31 reserved for future use reserved a33 reserved for future use reserved aa33 reserved for future use reserved aa35 reserved for future use reserved x6 reserved for future use reserved y1 reserved for future use reserved e27 reserved for future use reserved r2 reserved for future use reserved s35 reserved for future use reserved x2 reserved for future use reset# x4 agtl+ input rs0# ah26 agtl+ input rs1# ah22 agtl+ input rs2# ak28 agtl+ input slp# ah30 cmos input smi# aj35 cmos input stpclk# ag35 cmos input tck al33 tap input tdi an35 tap input tdo an37 tap output thermdn al29 power/other thermdp al31 power/other thermtrip# ah28 cmos output tms ak32 tap input trdy# an25 agtl+ input trst# an33 tap input v cc 1.5 ad36 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type v cc 2.5 z36 power/other v cc cmos ab36 power/other v cc core aj25 power/other v cc core aj29 power/other v cc core aj5 power/other v cc core aj9 power/other v cc core ak2 power/other v cc core ak34 power/other v cc core am12 power/other v cc core am16 power/other v cc core am20 power/other v cc core am24 power/other v cc core am28 power/other v cc core am32 power/other v cc core am4 power/other v cc core am8 power/other v cc core b10 power/other v cc core b14 power/other v cc core b18 power/other v cc core b22 power/other v cc core b26 power/other v cc core b30 power/other v cc core b34 power/other v cc core b6 power/other v cc core c3 power/other v cc core d20 power/other v cc core d24 power/other v cc core d28 power/other v cc core d32 power/other v cc core d36 power/other v cc core d6 power/other v cc core e13 power/other v cc core e17 power/other v cc core e5 power/other v cc core e9 power/other v cc core f14 power/other v cc core f2 power/other v cc core f22 power/other v cc core f26 power/other v cc core aa37 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type
90 datasheet intel ? celeron ? processor up to 1.10 ghz v cc core aa5 power/other v cc core ab2 power/other v cc core ab34 power/other v cc core ad32 power/other v cc core ae5 power/other v cc core af2 power/other v cc core af34 power/other v cc core ah24 power/other v cc core ah32 power/other v cc core ah36 power/other v cc core aj13 power/other v cc core aj17 power/other v cc core aj21 power/other v cc core f30 power/other v cc core f34 power/other v cc core f4 power/other v cc core h32 power/other v cc core h36 power/other v cc core j5 power/other v cc core k2 power/other v cc core k32 power/other v cc core k34 power/other v cc core m32 power/other v cc core n5 power/other v cc core p2 power/other v cc core p34 power/other v cc core r32 power/other v cc core r36 power/other v cc core s5 power/other v cc core t2 power/other v cc core t34 power/other v cc core v32 power/other v cc core v36 power/other v cc core w5 power/other v cc core x34 power/other v cc core y35 power/other v cc core z32 power/other v core det e21 power/other vid0 al35 power/other vid1 am36 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type vid2 al37 power/other vid3 aj37 power/other v ref 0 e33 power/other v ref 1 f18 power/other v ref 2 k4 power/other v ref 3 r6 power/other v ref 4 v6 power/other v ref 5 ad6 power/other v ref 6 ak12 power/other v ref 7 ak22 power/other v ss b16 power/other v ss b20 power/other v ss b24 power/other v ss b28 power/other v ss b32 power/other v ss b4 power/other v ss b8 power/other v ss d18 power/other v ss d2 power/other v ss d22 power/other v ss d26 power/other v ss d30 power/other v ss d34 power/other v ss d4 power/other v ss e11 power/other v ss e15 power/other v ss e19 power/other v ss e7 power/other v ss f20 power/other v ss f24 power/other v ss f28 power/other v ss f32 power/other v ss f36 power/other v ss g5 power/other v ss h2 power/other v ss h34 power/other v ss k36 power/other v ss l5 power/other v ss m2 power/other v ss m34 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type
datasheet 91 intel ? celeron ? processor up to 1.10 ghz v ss p32 power/other v ss p36 power/other v ss q5 power/other v ss r34 power/other v ss t32 power/other v ss t36 power/other v ss u5 power/other v ss v2 power/other v ss a37 power/other v ss ab32 power/other v ss ac33 power/other v ss ac5 power/other v ss ad2 power/other v ss ad34 power/other v ss af32 power/other v ss af36 power/other v ss ag5 power/other v ss ah2 power/other v ss ah34 power/other v ss aj11 power/other v ss aj15 power/other v ss aj19 power/other v ss aj23 power/other v ss aj27 power/other v ss aj3 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type v ss aj7 power/other v ss ak36 power/other v ss ak4 power/other v ss al1 power/other v ss al3 power/other v ss am10 power/other v ss am14 power/other v ss am18 power/other v ss am2 power/other v ss am22 power/other v ss am26 power/other v ss am30 power/other v ss am34 power/other v ss am6 power/other v ss an3 power/other v ss b12 power/other v ss v34 power/other v ss x32 power/other v ss x36 power/other v ss y37 power/other v ss y5 power/other v ss z2 power/other v ss z34 power/other v ss aj31 power/other v ss y33 power/other table 50. ppga package signal listing in order by signal name pin name pin no. signal buffer type
92 datasheet intel ? celeron ? processor up to 1.10 ghz 5.3 fc-pga/fc-pga2 packages this section defines the mechanical specifications and signal definitions for the intel celeron processor in the fc-pga and fc-pga2 packages. 5.3.1 fc-pga mechanical specifications figure 23 is provided to aid in the design of heatsink and clip solutions as well as demonstrate where pin-side capacitors will be located on the processor. table 51 provides the measurements for these dimensions in both inches and millimeters. notes: 1. unless otherwise specified, the following drawings are dimensioned in inches. 2. all dimensions provided with tolerances are guaranteed to be met for all normal production product. 3. figures and drawings labeled as ?reference dimensions? are provided for informational purposes only. reference dimensions are extracted from the mechanical design database and are nominal dimensions with no tolerance information applied. reference dimensions are not checked as part of the processor manufacturing. unless noted as such, dimensions in parentheses without tolerances are reference dimensions. 4. drawing not to scale. figure 23. package dimensions (fc-pga package)
datasheet 93 intel ? celeron ? processor up to 1.10 ghz notes: 1. capacitors and resistors may be placed on the pin-side of the fc-pga package in the area defined by g1, g2, and g3. this area is a keepout zone for motherboard designers. the bare processor die has mechanical load limits that should not be exceeded during heatsink assembly, mechanical stress testing, or standard drop and shipping conditions. the heatsink attach solution must not induce permanent stress into the processor substrate with the exception of a uniform load to maintain the heatsink to the processor thermal interface. the package dynamic and static loading parameters are listed in table 52 . for table 52 , the following apply: 1. it is not recommended to use any portion of the processor substrate as a mechanical reference or load bearing surface for thermal solutions. 2. parameters assume uniformly applied loads notes: 1. this specification applies to a uniform and a non-uniform load. 2. this is the maximum static force that can be applied by the heatsink and clip to maintain the heatsink and processor interface. table 51. package dimensions (fc-pga package) millimeters inches symbol min max notes min max notes a1 0.787 0.889 0.031 0.035 a2 1.000 1.200 0.039 0.047 b1 11.183 11.285 0.440 0.445 b2 9.225 9.327 0.363 0.368 c1 23.495 max 0.925 max c2 21.590 max 0.850 max d 49.428 49.632 1.946 1.954 d1 45.466 45.947 1.790 1.810 g1 0.000 17.780 1 0.000 0.700 g2 0.000 17.780 1 0.000 0.700 g3 0.000 0.889 1 0.000 0.035 h 2.540 nominal 0.100 nominal l 3.048 3.302 0.120 0.130 ? p 0.431 0.483 0.017 0.019 pin tp 0.508 diametric true position (pin-to-pin) 0.020 diametric true position (pin-to-pin) table 52. processor die loading parameters (fc-pga package) parameter dynamic (max) 1 static (max) 2 unit silicon die surface 200 50 lbf silicon die edge 100 12 lbf
94 datasheet intel ? celeron ? processor up to 1.10 ghz 5.3.2 mechanical specifications (fc-pga2 package) figure 24 is provided to aid in the design of heatsink and clip solutions as well as demonstrate where pin-side capacitors will be located on the processor. table 53 lists the measurements for these dimensions in both inches and millimeters. figure 24. package dimensions (fc-pga2 package)
datasheet 95 intel ? celeron ? processor up to 1.10 ghz note: capacitors will be placed on the pin-side of the fc-pga2 package in the area defined by g1, g2, and g3. this area is a keepout zone for motherboard designers. for table 52 , the following apply: 1. it is not recommended to use any portion of the processor substrate as a mechanical reference or load bearing surface for thermal solutions. 2. parameters assume uniformly applied loads. notes: 1. this specification applies to a uniform and a non-uniform load. 2. this is the maximum static force that can be applied by the heatsink and clip to maintain the heatsink and processor interface. 3. see socket manufacturer?s force loading specification also to ensure compliance. maximum static loading listed here does not account for the maximum reaction forces on the socket tabs or pins. table 53. package dimensions (fc-pga2 package) symbol millimeters inches minimum maximum notes minimum maximum notes a1 2.266 2.690 0.089 0.106 a2 0.980 1.180 0.038 0.047 b1 30.800 31.200 1.212 1.229 b2 30.800 31.200 1.212 1.229 c1 33.000 max 1.299 max c2 33.000 max 1.299 max d 49.428 49.632 1.946 1.954 d1 45.466 45.974 1.790 1.810 g1 0.000 17.780 0.000 0.700 g2 0.000 17.780 0.000 0.700 g3 0.000 0.889 0.000 0.035 h 2.540 nominal 0.100 nominal l 3.048 3.302 0.120 0.130 p 0.431 0.483 0.017 0.019 pin tp 0.508 diametric true position (pin-to-pin) 0.020 diametric true position (pin-to-pin) table 54. processor case loading parameters (fc-pga2 package) parameter dynamic (max) 1 static (max) 2,3 unit ihs surface 200 100 lbf ihs edge 125 n/a lbf ihs corner 75 n/a ibf
96 datasheet intel ? celeron ? processor up to 1.10 ghz 5.3.2.1 recommended mechanical keep-out zones (fc-pga2 package) figure 25. volumetric keep-out figure 26. component keep-out
datasheet 97 intel ? celeron ? processor up to 1.10 ghz 5.3.3 fc-pga/fc-pga2 package signal list table 55 and table 56 provide the processor pin definitions. the signal locations on the pga370 socket are to be used for signal routing, simulation, and component placement on the baseboard. figure 27 provides a pin-side view of the intel celeron fc-pga/fc-pga2 processor pin-out. figure 27. package dimensions (fc-pga/fc-pga2 packages) an am al ak aj ah ag af ae ad ac ab aa z y x w v u t s r q p n m l k j h g f e d c b a vss vcc vss d35 d29 d33 d26 d28 d21 d23 d25 vss vcc vss d31 vcc d43 vcc vss d34 d38 vcc vss d39 d36 vcc d37 d44 vcc vcc d32 d22 rsv d27 vss d42 d45 d49 vss vcc d63 vref1 vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss rsv rsv d62 slew ctrl rsv rsv vref0 bpm1 bp3 d41 d52 vss vcc vss vcc vss vcc vss vcc vss vcc d40 d59 d55 d54 d58 d50 d56 rsv rsv rsv bpm0 cpupres vcc vss vcc vss vcc vss vcc vss vcc vss vcc rsv d51 d47 d48 d57 d46 d53 d60 d61 rsv rsv rsv prdy vss bp2 rsv rsv vcc vss vcc picclk picd0 preq vcc vcc vss rsv picd1 lint1 vcc vss lint0 rsv rsv rsv vss vcc vss rsv rsv rsv vcc vss vcc rsv rtt ctrl rsv vss vcc vss pll2 rsv rsv vcc vss vcc rsv vcc vss vcc vss v_2.5 rsv rsv vcc vss vcc v_cmos vss ferr rsv vcc vss v_1.5 a20m ierr flush vss vcc vss init vss vcc vss pll1 rsv bclk stpclk ignne vss d16 d19 d7 d30 vcc vcc vref2 d24 d13 d20 vss vss d11 d3 d2 d14 vcc vcc d18 d9 d12 d10 vss rsv d17 vref3 d8 d5 vcc vcc d1 d6 d4 d15 vss vss rsv vref4 d0 rsv vcc rsv reset rsv rsv a26 vss vss a29 a18 a27 a30 vcc vcc a24 a23 rsv a20 vss vss a31 vref5 a17 a22 vcc vcc rsv a25 edgctrl a19 vss vss rsv a10 a5 a8 a4 bnr req1 req2 rsv rs1 vcc rs0 therm trip slp vcc vss vcc a21 vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc bsel1 bsel0 smi vid3 vcc vss a28 a3 a11 vref6 a14 rsv req0 lock vref7 rsv pwrgd rs2 rsv tms vcc vss vss vss a15 a13 a9 rsv rsv a7 req4 req3 rsv hitm hit dbsy thrmdn thrmdp tck vid0 vid2 rsv vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vcc vss vid1 vss a12 a16 a6 rsv rsv rsv bpri defer rsv rsv trdy drdy br0 ads trst tdi tdo pin side view 1 2 3 4 5 6 7 8 9 10111213141516171819202122 23 24252627282930313233 34353637 1 2 3 4 5 6 7 8 9 10111213141516171819202122 23 24252627282930313233 34353637 an am al ak aj ah ag af ae ad ac ab aa z y x w v u t s r q p n m l k j h g f e d c b a
98 datasheet intel ? celeron ? processor up to 1.10 ghz table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group a3# ak8 agtl+ i/o a4# ah12 agtl+ i/o a5# ah8 agtl+ i/o a6# an9 agtl+ i/o a7# al15 agtl+ i/o a8# ah10 agtl+ i/o a9# al9 agtl+ i/o a10# ah6 agtl+ i/o a11# ak10 agtl+ i/o a12# an5 agtl+ i/o a13# al7 agtl+ i/o a14# ak14 agtl+ i/o a15# al5 agtl+ i/o a16# an7 agtl+ i/o a17# ae1 agtl+ i/o a18# z6 agtl+ i/o a19# ag3 agtl+ i/o a20# ac3 agtl+ i/o a21# aj1 agtl+ i/o a22# ae3 agtl+ i/o a23# ab6 agtl+ i/o a24# ab4 agtl+ i/o a25# af6 agtl+ i/o a26# y3 agtl+ i/o a27# aa1 agtl+ i/o a28# ak6 agtl+ i/o a29# z4 agtl+ i/o a30# aa3 agtl+ i/o a31# ad4 agtl+ i/o a20m# ae33 cmos input ads# an31 agtl+ i/o bclk w37 system bus clock bnr# ah14 agtl+ i/o bp2# g33 agtl+ i/o bp3# e37 agtl+ i/o bpm0# c35 agtl+ i/o bpm1# e35 agtl+ i/o bpri# an17 agtl+ input br0# an29 agtl+ i/o bsel0 aj33 cmos i/o bsel1 5 aj31 power/other cpupres# c37 power/other d0# w1 agtl+ i/o d1# t4 agtl+ i/o d2# n1 agtl+ i/o d3# m6 agtl+ i/o d4# u1 agtl+ i/o d5# s3 agtl+ i/o d6# t6 agtl+ i/o d7# j1 agtl+ i/o d8# s1 agtl+ i/o d9# p6 agtl+ i/o d10# q3 agtl+ i/o d11# m4 agtl+ i/o d12# q1 agtl+ i/o d13# l1 agtl+ i/o d14# n3 agtl+ i/o d15# u3 agtl+ i/o d16# h4 agtl+ i/o d17# r4 agtl+ i/o d18# p4 agtl+ i/o d19# h6 agtl+ i/o d20# l3 agtl+ i/o d21# g1 agtl+ i/o d22# f8 agtl+ i/o d23# g3 agtl+ i/o d24# k6 agtl+ i/o d25# e3 agtl+ i/o d26# e1 agtl+ i/o d27# f12 agtl+ i/o d28# a5 agtl+ i/o d29# a3 agtl+ i/o d30# j3 agtl+ i/o d31# c5 agtl+ i/o d32# f6 agtl+ i/o d33# c1 agtl+ i/o d34# c7 agtl+ i/o d35# b2 agtl+ i/o table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group
datasheet 99 intel ? celeron ? processor up to 1.10 ghz d36# c9 agtl+ i/o d37# a9 agtl+ i/o d38# d8 agtl+ i/o d39# d10 agtl+ i/o d40# c15 agtl+ i/o d41# d14 agtl+ i/o d42# d12 agtl+ i/o d43# a7 agtl+ i/o d44# a11 agtl+ i/o d45# c11 agtl+ i/o d46# a21 agtl+ i/o d47# a15 agtl+ i/o d48# a17 agtl+ i/o d49# c13 agtl+ i/o d50# c25 agtl+ i/o d51# a13 agtl+ i/o d52# d16 agtl+ i/o d53# a23 agtl+ i/o d54# c21 agtl+ i/o d55# c19 agtl+ i/o d56# c27 agtl+ i/o d57# a19 agtl+ i/o d58# c23 agtl+ i/o d59# c17 agtl+ i/o d60# a25 agtl+ i/o d61# a27 agtl+ i/o d62# e25 agtl+ i/o d63# f16 agtl+ i/o dbsy# al27 agtl+ i/o defer# an19 agtl+ input drdy# an27 agtl+ i/o edgctrl 2,8 ag1 power/other ferr# ac35 cmos output flush# ae37 cmos input gnd a37 power/other gnd ab32 power/other gnd ac5 power/other gnd ac33 power/other gnd ad2 power/other table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group gnd ad34 power/other gnd af32 power/other gnd af36 power/other gnd ag5 power/other gnd ah2 power/other gnd ah34 power/other gnd aj3 power/other gnd aj7 power/other gnd aj11 power/other gnd aj15 power/other gnd aj19 power/other gnd aj23 power/other gnd aj27 power/other gnd ak4 power/other gnd ak36 power/other gnd al1 power/other gnd al3 power/other gnd am6 power/other gnd am10 power/other gnd am14 power/other gnd am18 power/other gnd am22 power/other gnd am26 power/other gnd am30 power/other gnd am34 power/other gnd an3 power/other gnd b4 power/other gnd b8 power/other gnd b12 power/other gnd b16 power/other gnd b20 power/other gnd b24 power/other gnd b28 power/other gnd b32 power/other gnd d2 power/other gnd d4 power/other gnd d18 power/other gnd d22 power/other gnd d26 power/other table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group
100 datasheet intel ? celeron ? processor up to 1.10 ghz gnd d30 power/other gnd d34 power/other gnd e7 power/other gnd e11 power/other gnd e15 power/other gnd e19 power/other gnd f20 power/other gnd f24 power/other gnd f28 power/other gnd f32 power/other gnd f36 power/other gnd g5 power/other gnd h2 power/other gnd h34 power/other gnd k36 power/other gnd l5 power/other gnd m2 power/other gnd m34 power/other gnd p32 power/other gnd p36 power/other gnd q5 power/other gnd r34 power/other gnd t32 power/other gnd t36 power/other gnd u5 power/other gnd v2 power/other gnd v34 power/other gnd x32 power/other reserved x34 reserved for future use gnd x36 power/other gnd y5 power/other gnd y37 power/other gnd z2 power/other gnd z34 power/other hit# al25 agtl+ i/o hitm# al23 agtl+ i/o ierr# ae35 cmos output ignne# ag37 cmos input init# ag33 cmos input table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group lint0/intr m36 cmos input lint1/nmi l37 cmos input lock# ak20 agtl+ i/o picclk j33 apic clock input picd0 j35 apic i/o picd1 l35 apic i/o pll1 w33 power/other pll2 u33 power/other prdy# a35 agtl+ output preq# j37 cmos input pwrgood ak26 cmos input req0# ak18 agtl+ i/o req1# ah16 agtl+ i/o req2# ah18 agtl+ i/o req3# al19 agtl+ i/o req4# al17 agtl+ i/o reserved a29 reserved for future use reserved a31 reserved for future use reserved a33 reserved for future use reserved ac1 reserved for future use reserved ac37 reserved for future use reserved af4 reserved for future use reserved ah20 reserved for future use reserved ak16 reserved for future use reserved ak24 reserved for future use reserved ak30 reserved for future use reserved al11 reserved for future use reserved al13 reserved for future use reserved al21 reserved for future use reserved an11 reserved for future use reserved an13 reserved for future use reserved an15 reserved for future use reserved an21 reserved for future use reserved an23 reserved for future use reserved b36 reserved for future use reserved c29 reserved for future use reserved c31 reserved for future use reserved c33 reserved for future use reserved e23 reserved for future use table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group
datasheet 101 intel ? celeron ? processor up to 1.10 ghz reserved e29 reserved for future use reserved e31 reserved for future use reserved f10 reserved for future use reserved g35 reserved for future use reserved g37 reserved for future use reserved l33 reserved for future use reserved n33 reserved for future use reserved n35 reserved for future use reserved n37 reserved for future use reserved q33 reserved for future use reserved q35 reserved for future use reserved q37 reserved for future use reserved r2 reserved for future use reserved s33 reserved for future use reserved s37 reserved for future use reserved u35 reserved for future use reserved u37 reserved for future use reserved v4 reserved for future use reserved w3 reserved for future use reserved w35 reserved for future use reserved x6 reserved for future use reserved x20 reserved for future use reserved y1 reserved for future use reserved aa33 reserved for future use reserved aa35 reserved for future use reserved 3 am2 reserved for future use reserved 4 y33 reserved for future use reset# 6 ah4 power/other reset# 7 x4 power/other rs0# ah26 agtl+ input rs1# ah22 agtl+ input rs2# ak28 agtl+ input rttctrl s35 power/other slewctrl e27 power/other slp# ah30 cmos input smi# aj35 cmos input stpclk# ag35 cmos input tck al33 tap input tdi an35 tap input table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group tdo an37 tap output thermdn al29 power/other thermdp al31 power/other thermtrip# ah28 cmos output tms ak32 tap input trdy# an25 agtl+ input trst# an33 tap input v cc 1.5 1 ad36 power/other vcc 2.5 z36 power/other v cc cmos ab36 power/other v cc core aa5 power/other v cc core aa37 power/other v cc core ab2 power/other v cc core ab34 power/other v cc core ad32 power/other v cc core ae5 power/other v cc core af2 power/other v cc core af34 power/other v cc core ah24 power/other v cc core ah32 power/other v cc core ah36 power/other v cc core aj5 power/other v cc core aj9 power/other v cc core aj13 power/other v cc core aj17 power/other v cc core aj21 power/other v cc core aj25 power/other v cc core aj29 power/other v cc core ak2 power/other v cc core ak34 power/other v cc core am4 power/other v cc core am8 power/other v cc core am12 power/other v cc core am16 power/other v cc core am20 power/other v cc core am24 power/other v cc core am28 power/other v cc core am32 power/other v cc core b6 power/other table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group
102 datasheet intel ? celeron ? processor up to 1.10 ghz notes: 1. vcc 1.5 must be supplied by the same voltage source supplying v tt on the motherboard. 2. previously this pin functioned as the edgctrl signal. 3. previously, pga370 designs defined this pin as a gnd. for flexible pga370 designs, it must be left unconnected (nc). 4. previously, pga370 designs defined this pin as a gnd. 5. intel celeron processor in the fc-pga/fc-pga2 packages do not use this pin. 6. this pin is only reset for processors with a cpuid of 0686h. for previous celeron processors prior to 0686h (not including 0686h) this pin is reserved. 7. this pin is reserved for intel celeron processors with a cpuid of 0686h. 8. for cpuid of 0681h, this is a v ss . for other 068xh processors, this pin is a no connect (nc). v cc core b10 power/other v cc core b14 power/other v cc core b18 power/other v cc core b22 power/other v cc core b26 power/other v cc core b30 power/other v cc core b34 power/other v cc core c3 power/other v cc core d6 power/other v cc core d20 power/other v cc core d24 power/other v cc core d28 power/other v cc core d32 power/other v cc core d36 power/other v cc core e5 power/other v cc core e9 power/other v cc core e13 power/other v cc core e17 power/other v cc core f2 power/other v cc core f4 power/other v cc core f14 power/other v cc core f22 power/other v cc core f26 power/other v cc core f30 power/other v cc core f34 power/other v cc core h32 power/other v cc core h36 power/other v cc core j5 power/other v cc core k2 power/other v cc core k32 power/other v cc core k34 power/other v cc core m32 power/other v cc core n5 power/other v cc core p2 power/other v cc core p34 power/other v cc core r32 power/other v cc core r36 power/other v cc core s5 power/other v cc core t2 power/other table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group v cc core t34 power/other v cc core v32 power/other v cc core v36 power/other v cc core w5 power/other v cc core x34 power/other v cc core y35 power/other v cc core z32 power/other v core _ det e21 power/other vid0 al35 power/other vid1 am36 power/other vid2 al37 power/other vid3 aj37 power/other v ref 0 e33 power/other v ref 1 f18 power/other v ref 2 k4 power/other v ref 3 r6 power/other v ref 4 v6 power/other v ref 5 ad6 power/other v ref 6 ak12 power/other v ref 7 ak22 power/other table 55. fc-pga/fc-pga2 signal listing in order by signal name pin name pin signal group
datasheet 103 intel ? celeron ? processor up to 1.10 ghz table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group a3 d29# agtl+ i/o a5 d28# agtl+ i/o a7 d43# agtl+ i/o a9 d37# agtl+ i/o a11 d44# agtl+ i/o a13 d51# agtl+ i/o a15 d47# agtl+ i/o a17 d48# agtl+ i/o a19 d57# agtl+ i/o a21 d46# agtl+ i/o a23 d53# agtl+ i/o a25 d60# agtl+ i/o a27 d61# agtl+ i/o a29 reserved reserved for future use a31 reserved reserved for future use a33 reserved reserved for future use a35 prdy# agtl+ output a37 gnd power/other aa1 a27# agtl+ i/o aa3 a30# agtl+ i/o aa5 v cc core power/other aa33 reserved reserved for future use aa35 reserved reserved for future use aa37 v cc core power/other ab2 v cc core power/other ab4 a24# agtl+ i/o ab6 a23# agtl+ i/o ab32 gnd power/other ab34 v cc core power/other ab36 v cc cmos power/other ac1 reserved reserved for future use ac3 a20# agtl+ i/o ac5 gnd power/other ac33 gnd power/other ac35 ferr# cmos output ac37 reserved reserved for future use ad2 gnd power/other ad4 a31# agtl+ i/o ad6 v ref 5 power/other ad32 v cc core power/other ad34 gnd power/other ad36 v cc 1.5 1 power/other ae1 a17# agtl+ i/o ae3 a22# agtl+ i/o ae5 v cc core power/other ae33 a20m# cmos input ae35 ierr# cmos output ae37 flush# cmos input af2 v cc core power/other af4 reserved reserved for future use af6 a25# agtl+ i/o af32 gnd power/other af34 v cc core power/other af36 gnd power/other ag1 edgctrl 2,8 power/other ag3 a19# agtl+ i/o ag5 gnd power/other ag33 init# cmos input ag35 stpclk# cmos input ag37 ignne# cmos input ah2 gnd power/other ah4 reset# 6 power/other ah6 a10# agtl+ i/o ah8 a5# agtl+ i/o ah10 a8# agtl+ i/o ah12 a4# agtl+ i/o ah14 bnr# agtl+ i/o ah16 req1# agtl+ i/o ah18 req2# agtl+ i/o ah20 reserved reserved for future use ah22 rs1# agtl+ input ah24 v cc core power/other ah26 rs0# agtl+ input ah28 thermtrip# cmos output ah30 slp# cmos input ah32 v cc core power/other ah34 gnd power/other ah36 v cc core power/other table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group
104 datasheet intel ? celeron ? processor up to 1.10 ghz aj1 a21# agtl+ i/o aj3 gnd power/other aj5 v cc core power/other aj7 gnd power/other aj9 v cc core power/other aj11 gnd power/other aj13 v cc core power/other aj15 gnd power/other aj17 v cc core power/other aj19 gnd power/other aj21 v cc core power/other aj23 gnd power/other aj25 v cc core power/other aj27 gnd power/other aj29 v cc core power/other aj31 bsel1 5 power/other aj33 bsel0 cmos i/o aj35 smi# cmos input aj37 vid3 power/other ak2 v cc core power/other ak4 gnd power/other ak6 a28# agtl+ i/o ak8 a3# agtl+ i/o ak10 a11# agtl+ i/o ak12 v ref 6 power/other ak14 a14# agtl+ i/o ak16 reserved reserved for future use ak18 req0# agtl+ i/o ak20 lock# agtl+ i/o ak22 v ref 7 power/other ak24 reserved reserved for future use ak26 pwrgood cmos input ak28 rs2# agtl+ input ak30 reserved reserved for future use ak32 tms tap input ak34 v cc core power/other ak36 gnd power/other al1 gnd power/other al3 gnd power/other table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group al5 a15# agtl+ i/o al7 a13# agtl+ i/o al9 a9# agtl+ i/o al11 reserved reserved for future use al13 reserved reserved for future use al15 a7# agtl+ i/o al17 req4# agtl+ i/o al19 req3# agtl+ i/o al21 reserved reserved for future use al23 hitm# agtl+ i/o al25 hit# agtl+ i/o al27 dbsy# agtl+ i/o al29 thermdn power/other al31 thermdp power/other al33 tck tap input al35 vid0 power/other al37 vid2 power/other am2 reserved 3 reserved for future use am4 v cc core power/other am6 gnd power/other am8 v cc core power/other am10 gnd power/other am12 v cc core power/other am14 gnd power/other am16 v cc core power/other am18 gnd power/other am20 v cc core power/other am22 gnd power/other am24 v cc core power/other am26 gnd power/other am28 v cc core power/other am30 gnd power/other am32 v cc core power/other am34 gnd power/other am36 vid1 power/other an3 gnd power/other an5 a12# agtl+ i/o an7 a16# agtl+ i/o an9 a6# agtl+ i/o table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group
datasheet 105 intel ? celeron ? processor up to 1.10 ghz an11 reserved reserved for future use an13 reserved reserved for future use an15 reserved reserved for future use an17 bpri# agtl+ input an19 defer# agtl+ input an21 reserved reserved for future use an23 reserved reserved for future use an25 trdy# agtl+ input an27 drdy# agtl+ i/o an29 br0# agtl+ i/o an31 ads# agtl+ i/o an33 trst# tap input an35 tdi tap input an37 tdo tap output b2 d35# agtl+ i/o b4 gnd power/other b6 v cc core power/other b8 gnd power/other b10 v cc core power/other b12 gnd power/other b14 v cc core power/other b16 gnd power/other b18 v cc core power/other b20 gnd power/other b22 v cc core power/other b24 gnd power/other b26 v cc core power/other b28 gnd power/other b30 v cc core power/other b32 gnd power/other b34 v cc core power/other b36 reserved reserved for future use c1 d33# agtl+ i/o c3 v cc core power/other c5 d31# agtl+ i/o c7 d34# agtl+ i/o c9 d36# agtl+ i/o c11 d45# agtl+ i/o c13 d49# agtl+ i/o table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group c15 d40# agtl+ i/o c17 d59# agtl+ i/o c19 d55# agtl+ i/o c21 d54# agtl+ i/o c23 d58# agtl+ i/o c25 d50# agtl+ i/o c27 d56# agtl+ i/o c29 reserved reserved for future use c31 reserved reserved for future use c33 reserved reserved for future use c35 bpm0# agtl+ i/o c37 cpupres# power/other d2 gnd power/other d4 gnd power/other d6 v cc core power/other d8 d38# agtl+ i/o d10 d39# agtl+ i/o d12 d42# agtl+ i/o d14 d41# agtl+ i/o d16 d52# agtl+ i/o d18 gnd power/other d20 v cc core power/other d22 gnd power/other d24 v cc core power/other d26 gnd power/other d28 v cc core power/other d30 gnd power/other d32 v cc core power/other d34 gnd power/other d36 v cc core power/other e1 d26# agtl+ i/o e5 v cc core power/other e7 gnd power/other e9 v cc core power/other e11 gnd power/other e13 v cc core power/other e15 gnd power/other e17 v cc core power/other e19 gnd power/other table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group
106 datasheet intel ? celeron ? processor up to 1.10 ghz e21 v core _ det power/other e23 reserved reserved for future use e25 d62# agtl+ i/o e27 slewctrl power/other e29 reserved reserved for future use e3 d25# agtl+ i/o e31 reserved reserved for future use e33 v ref 0 power/other e35 bpm1# agtl+ i/o e37 bp3# agtl+ i/o f2 v cc core power/other f4 v cc core power/other f6 d32# agtl+ i/o f8 d22# agtl+ i/o f10 reserved reserved for future use f12 d27# agtl+ i/o f14 v cc core power/other f16 d63# agtl+ i/o f18 v ref 1 power/other f20 gnd power/other f22 v cc core power/other f24 gnd power/other f26 v cc core power/other f28 gnd power/other f30 v cc core power/other f32 gnd power/other f34 v cc core power/other f36 gnd power/other g1 d21# agtl+ i/o g3 d23# agtl+ i/o g5 gnd power/other g33 bp2# agtl+ i/o g35 reserved reserved for future use g37 reserved reserved for future use h2 gnd power/other h4 d16# agtl+ i/o h6 d19# agtl+ i/o h32 v cc core power/other h34 gnd power/other table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group h36 v cc core power/other j1 d7# agtl+ i/o j3 d30# agtl+ i/o j5 v cc core power/other j33 picclk apic clock input j35 picd0 apic i/o j37 preq# cmos input k2 v cc core power/other k4 v ref 2 power/other k6 d24# agtl+ i/o k32 v cc core power/other k34 v cc core power/other k36 gnd power/other l1 d13# agtl+ i/o l3 d20# agtl+ i/o l5 gnd power/other l33 reserved reserved for future use l35 picd1 apic i/o l37 lint1/nmi cmos input m2 gnd power/other m4 d11# agtl+ i/o m6 d3# agtl+ i/o m32 v cc core power/other m34 gnd power/other m36 lint0/intr cmos input n1 d2# agtl+ i/o n3 d14# agtl+ i/o n5 v cc core power/other n33 reserved reserved for future use n35 reserved reserved for future use n37 reserved reserved for future use p2 v cc core power/other p4 d18# agtl+ i/o p6 d9# agtl+ i/o p32 gnd power/other p34 v cc core power/other p36 gnd power/other q1 d12# agtl+ i/o q3 d10# agtl+ i/o table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group
datasheet 107 intel ? celeron ? processor up to 1.10 ghz notes: 1. vcc 1.5 must be supplied by the same voltage source supplying v tt on the motherboard. 2. previously this pin functioned as the edgctrl signal. 3. previously, pga370 designs defined this pin as a gnd. for flexible pga370 designs, it must be left unconnected (nc). 4. previously, pga370 designs defined this pin as a gnd. 5. celeron processor in the fc-pga/fc-pga2 packages does not make use of this pin. 6. this pin is only reset for processors with a cpuid of 0686h. for previous celeron processors prior to 0686h (not including 0686h) this pin is reserved. 7. this pin is reserved for celeron processors with a cpuid of 0686h. 8. for cpuid of 0681h, this is a v ss . for other 068xh processors, this pin is a no connect (nc). q5 gnd power/other q33 reserved reserved for future use q35 reserved reserved for future use q37 reserved reserved for future use r2 reserved reserved for future use r4 d17# agtl+ i/o r6 v ref 3 power/other r32 v cc core power/other r34 gnd power/other r36 v cc core power/other s1 d8# agtl+ i/o s3 d5# agtl+ i/o s5 v cc core power/other s33 reserved reserved for future use s35 rttctrl power/other s37 reserved reserved for future use t2 v cc core power/other t4 d1# agtl+ i/o t6 d6# agtl+ i/o t32 gnd power/other t34 v cc core power/other t36 gnd power/other u1 d4# agtl+ i/o u3 d15# agtl+ i/o u5 gnd power/other u33 pll2 power/other u35 reserved reserved for future use u37 reserved reserved for future use v2 gnd power/other v4 reserved reserved for future use v6 v ref 4 power/other v32 v cc core power/other v34 gnd power/other v36 v cc core power/other w1 d0# agtl+ i/o w3 reserved reserved for future use w5 v cc core power/other w33 pll1 power/other w35 reserved reserved for future use table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group w37 bclk system bus clock x4 reset# 7 power/other x6 reserved reserved for future use x20 reserved reserved for future use x32 gnd power/other x34 reserved reserved for future use x36 gnd power/other y1 reserved reserved for future use y3 a26# agtl+ i/o y5 gnd power/other y33 reserved 4 reserved for future use y35 v cc core power/other y37 gnd power/other z2 gnd power/other z4 a29# agtl+ i/o z6 a18# agtl+ i/o z32 v cc core power/other z34 gnd power/other z36 vcc 2.5 power/other table 56. fc-pga/fc-pga2 signal listing in order by pin number pin no. pin name signal group
108 datasheet intel ? celeron ? processor up to 1.10 ghz 5.4 processor markings (ppga/fc-pga/fc-pga2 packages) figure 28 through figure 30 show processor top-side markings; the markings aid in the identification of a celeron processor for the pga370 socket. package dimension measurements are provided in table 47 for the ppga package, table 51 for the fc-pga package, and table 53 for the fc-pga2 package. figure 28. top side processor markings (ppga package) figure 29. top side processor markings (fc-pga package) figure 30. top side processor markings (fc-pga2 package) celeron ? rb80526rx566128 ffffffff-0001 sssss malay country of origin celeron logo product code fpo # - s/n s-spec# grp1line1 grp1line2 grp2line1 grp2line2 2d matrix mark grp2ln1: (fpo)-(s/n) grp2ln2: celeron (s-spec) grp1ln1: intel (m)(c) '01__-__(country of origin) grp1ln2: (core freq)/(cache)/(bus freq)/(voltage) grp1ln1 grp1ln2 grp2ln1 grp2ln2 grp2ln1: (fpo)-(s/n) grp2ln2: celeron (s-spec) grp1ln1: intel (m)(c) '01__-__(country of origin) grp1ln2: (core freq)/(cache)/(bus freq)/(voltage)
datasheet 109 intel ? celeron ? processor up to 1.10 ghz 5.5 heatsink volumetric keepout zone guidelines when designing a system platform it is necessary to ensure sufficient space is left for a heatsink to be installed without mechanical interference. due to the large number of proprietary heatsink designs, intel cannot specify a keepout zone that covers all passive and active-fan heatsinks. it is the system designer?s responsibility to consider their own proprietary solution when designing the desired keepout zone in their system platform. please refer to the intel ? celeron ? processor (ppga) at 466 mhz thermal solutions guidelines (order number 245156) for further guidance. note: the heatsink keepout zones found in section 6.0, ?boxed processor specifications? on page 110 refer specifically to the boxed processor?s active-fan heatsink. this does not reflect the worst-case dimensions that may exist with other third party passive or active-fan heatsinks. contact your vendor of choice for their passive or active-fan heatsink dimensions to ensure that mechanical interference with system platform components does not occur.
110 datasheet intel ? celeron ? processor up to 1.10 ghz 6.0 boxed processor specifications the celeron processor is also offered as an intel boxed processor in the fc-pga/fc-pga2, ppga, and s.e.p. packages. intel boxed processors are intended for system integrators who build systems from motherboards and standard components. the boxed celeron processor in the s.e.p. package is supplied with an attached fan heatsink. the boxed celeron processors in fc-pga/ fc-pga2 and ppga packages are supplied with unattached fan heatsinks. this section documents motherboard and system requirements for the fan heatsink that is supplied with the boxed intel celeron processor. this section is particularly important for oems that manufacture motherboards for system integrators. unless otherwise noted, all figures in this section are dimensioned in inches. note: drawings in this section reflect only the specifications of the intel boxed processor product. these dimensions should not be used as a generic keepout zone for all heatsinks. it is the system designer?s responsibility to consider their proprietary solution when designing to the required keepout zone on their system platform and chassis. refer to the package specific thermal / mechanical solution functional specifications for further guidance. contact your local intel sales representative for these documents. 6.1 mechanical specifications for the boxed intel ? celeron ? processor 6.1.1 mechanical specifications for the s.e.p. package this section documents the mechanical specifications of the boxed celeron processor fan heatsink in the s.e.p. package. the boxed processor in the s.e.p. package ships with an attached fan heatsink. figure 31 shows a mechanical representation of the boxed intel celeron processor in a s.e.p. package in the retention mechanism, which is not shipped with the boxed intel celeron processor. the space requirements and dimensions for the boxed processor in the s.e.p. package are shown in figure 32 and figure 33 . also, a conceptual attachment interface to low profile retention mechanism is shown in figure 38 . note: the heatsink airflow keepout zones found in table 57 and figure 38 refer specifically to the boxed processor?s active fan heatsink. this does not reflect the worst-case dimensions that may exist with other third party passive or active fan heatsinks.
datasheet 111 intel ? celeron ? processor up to 1.10 ghz figure 31. retention mechanism for the boxed intel ? celeron ? processor in the s.e.p. package figure 32. side view space requirements for the boxed processor in the s.e.p. package 242-contact slot connector fan heatsink s.e.p.p. 1.386 (a) 0.576 (b)
112 datasheet intel ? celeron ? processor up to 1.10 ghz 6.1.1.1 boxed processor heatsink weight the heatsink for the boxed intel celeron processor in the s.e.p. package will not weigh more than 225 grams. 6.1.1.2 boxed processor retention mechanism the boxed intel celeron processor requires a s.e.p. package retention mechanism to secure the processor in the 242-contact slot connector. a s.e.p. package retention mechanism are provided with the boxed processor. motherboards designed for use by system integrators should include a retention mechanism and appropriate installation instructions. the boxed intel celeron processor does not require additional fan heatsink supports. fan heatsink supports are not shipped with the boxed intel celeron processor. motherboards designed for flexible use by system integrators must still recognize the boxed pentium ii processor?s fan heatsink clearance requirements, which are described in the pentium ? ii processor at 233, 266, 300, and 333 mhz datasheet (order number 243335). figure 33. front view space requirements for the boxed processor in the s.e.p. package table 57. boxed processor fan heatsink spatial dimensions for the s.e.p. package fig. ref. label dimensions (inches) min typ max a fan heatsink depth (see figure 27 )1.40 b fan heatsink height from motherboard (see figure 27 )0.58 c fan heatsink height (see figure 31 )2.00 d fan heatsink width (see figure 31 )4.80 e fan heatsink base width (see figure 31 )5.4 f airflow keepout zones from end of fan heatsink 0.4 g airflow keepout zones from face of fan heatsink 0.2 4.74 (d) 2.02 (c) 5.40 (e)
datasheet 113 intel ? celeron ? processor up to 1.10 ghz 6.1.2 mechanical specifications for the ppga package this section documents the mechanical specifications for the fan heatsink of the boxed celeron processor in the ppga package. the boxed processor in the ppga package ships with an unattached fan heatsink which has an integrated clip. figure 34 shows a mechanical representation of the boxed intel celeron processor in the ppga package. note that the airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. clearance is required around the fan heatsink to ensure unimpeded airflow for proper cooling. the space requirements and dimensions for the boxed processor with an integrated fan heatsink are shown in figure 35 . all dimensions are in inches. note: the heatsink airflow keepout zones found in figure 39 refer specifically to the boxed processor?s active fan heatsink. this does not reflect the worst-case dimensions that may exist with other third party passive or active fan heatsinks. figure 34. boxed intel ? celeron ? processor in the ppga package figure 35. side view space requirements for the boxed processor in the ppga package
114 datasheet intel ? celeron ? processor up to 1.10 ghz 6.1.2.1 boxed processor heatsink weight the heatsink for the boxed intel celeron processor in the ppga package will not weigh more than 180 grams. 6.1.3 mechanical specifications for the fc-pga/fc-pga2 packages this section documents the mechanical specifications of the fan heatsink for the boxed intel celeron processor in the fc-pga/fc-pga2 (flip-chip pin grid array) packages. the boxed processor in the fc-pga/fc-pga2 packages ships with a fan heatsink which has an integrated clip. figure 36 shows a mechanical representation of the boxed intel celeron processor in the fc-pga/fc-pga2 packages. figure 39 and figure 41 show the required keepout dimensions for the boxed processor thermal solution. the cooling fin orientation on the heatsink relative to the pga-370 socket is subject to change. contact your local intel sales representative for documentation specific to the boxed fan heatsink orientation relative to the pga-370 socket. the boxed processor fan heatsink is also asymmetrical in that the mechanical step feature (specified in figure 37 ) must sit over the socket?s cam. the step allows the heatsink to securely interface with the processor in order to meet the processors thermal requirements. figure 36. conceptual drawing of the boxed intel ? celeron ? processor in the 370-pin socket (fc-pga/fc-pga2 packages) figure 37. dimensions of mechanical step feature in heatsink base for the fc-pga/ fc-pga2 packages 0.043 0.472 units = inches
datasheet 115 intel ? celeron ? processor up to 1.10 ghz 6.1.3.1 boxed processor heatsink weight the heatsink for the boxed intel celeron processor in the fc-pga/fc-pga2 packages will not weigh more than 180 grams. 6.2 thermal specifications this section describes the cooling requirements of the fan heatsink solution utilized by the boxed processors. 6.2.1 thermal requirements for the boxed intel ? celeron ? processor 6.2.1.1 boxed processor cooling requirements the boxed processor is directly cooled with a fan heatsink. however, meeting the processor's temperature specification is also a function of the thermal design of the entire system, and ultimately the responsibility of the system integrator. the processor temperature specification is found in section 4.0 of this document. the boxed processor fan heatsink is able to keep the processor temperature within the specifications (see section 4.0 ) in chassis that provide good thermal management. for the boxed processor fan heatsink to operate properly, it is critical that the airflow provided to the fan heatsink is unimpeded. airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. airspace is required around the fan to ensure that the airflow through the fan heatsink is not blocked. blocking the airflow to the fan heatsink reduces the cooling efficiency and decreases fan life. figure 38 and figure 39 illustrate an acceptable airspace clearance for the fan heatsink. it is also recommended that the air temperature entering the fan be kept below 45 c. again, meeting the processor's temperature specification is the responsibility of the system integrator. the processor temperature specification is found in section 4.0 of this document. figure 38. top view airspace requirements for the boxed processor in the s.e.p. package 0.40 min air space (f) (both ends) 0.20 min air space (g) measure ambient temperature 0.3" above center of fan inlet fan heatsink processor a irspace
116 datasheet intel ? celeron ? processor up to 1.10 ghz figure 39. side view airspace requirements for the boxed intel ? celeron ? processor in the fc-pga/fc-pga2 and ppga packages figure 40. volumetric keepout requirements for the boxed fan heatsink measure ambient temperature 0.3" above center of fan inlet 0.20 min air space 0.20 min air space fan heatsink processor
datasheet 117 intel ? celeron ? processor up to 1.10 ghz 6.2.1.2 boxed processor thermal cooling solution clip the boxed processor thermal solution requires installation by a system integrator to secure the thermal cooling solution to the processor after it is installed in the 370-pin socket zif socket. motherboards designed for use by system integrators should take care to consider the implications of clip installation and potential scraping of the motherboard pcb underneath the 370-pin socket attach tabs. motherboard components should not be placed too close to the 370-pin socket attach tabs in a way that interferes with the installation of the boxed processor thermal cooling solution (see figure 41 for specifications). 6.3 electrical requirements for the boxed intel ? celeron ? processor 6.3.1 electrical requirements the boxed processor's fan heatsink requires a +12 v power supply. a fan power cable is shipped with the boxed processor to draw power from a power header on the motherboard. the power cable connector and pin-out are shown in figure 42 . motherboards must provide a matched power header to support the boxed processor. table 58 contains specifications for the input and output signals at the fan heatsink connector. the fan heatsink outputs a sense signal (an open-collector output) that pulses at a rate of two pulses per fan revolution. a motherboard pull-up resistor provides v oh to match the motherboard-mounted fan speed monitor requirements, if applicable. use of the sense signal is optional. if the sense signal is not used, pin 3 of the connector should be tied to gnd. figure 41. clip keepout requirements for the 370-pin (top view)
118 datasheet intel ? celeron ? processor up to 1.10 ghz the boxed intel celeron processors in the ppga package at 500 mhz and below are shipped with an unattached fan heatsink with two wire power-supply cables. these two wire fans do not support the motherboard-mounted fan speed monitor feature. the intel celeron processor at 533 mhz and above ship with unattached fan heatsinks that have three power-supply cables. these three wire fans do support the motherboard-mounted fan speed monitor feature. the power header on the baseboard must be positioned to allow the fan heatsink power cable to reach it. the power header identification and location should be documented in the motherboard documentation or on the motherboard. figure 43 shows the recommended location of the fan power connector relative to the 242-contact slot connector. figure 44 shows the recommended location of the fan power connector relative to the 370-pin socket. for the s.e.p. package, the motherboard power header should be positioned within 4.75 inches (lateral) of the fan power connector. the motherboard power header should be positioned within 4.00 inches (lateral) of the fan power connector for the ppga and fc-pga/fc-pga2 packages. figure 42. boxed processor fan heatsink power cable connector description table 58. fan heatsink power and signal specifications description min typ max +12v: 12 volt fan power supply 10.2v 12v 13.8v ic: fan current draw 100 ma sense: sense frequency (motherboard should pull this pin up to appropriate vcc with resistor) 2 pulses per fan revolution pin signal straight square pin, 3-pin terminal housing with polarizing ribs and friction locking ramp. 0.100" pin pitch, 0.025" square pin width. waldom*/molex* p/n 22-01-3037 or equivalent. match with straight pin, friction lock header on motherboard waldom/molex p/n 22-23-2031, amp* p/n 640456-3, or equivalent. 1 2 3 gnd +12v sense 123
datasheet 119 intel ? celeron ? processor up to 1.10 ghz figure 43. motherboard power header placement for the s.e.p. package figure 44. motherboard power header placement relative to the 370-pin socket 242-contact slot connector 1.449" 1.428" fan power connector location (1.56 inches above motherboard motherboard fan power header should be positioned within 4.75 inches of the fan power connector (lateral distance). r = 4.75" pga370 ppga1.vsd r = 4.00"
120 datasheet intel ? celeron ? processor up to 1.10 ghz 7.0 processor signal description table 59 provides an alphabetical listing of all celeron processor signals. the tables at the end of this section summarize the signals by direction (output, input, and i/o). note: unless otherwise noted, the signals apply to s.e.p., ppga, and fc-pga/fc-pga2 packages. table 59. alphabetical signal reference (sheet 1 of 7) signal type description a[31:3]# i/o the a[31:3]# (address) signals define a 2 32 -byte physical memory address space. when ads# is active, these pins transmit the address of a transaction; when ads# is inactive, these pins transmit transaction type information. these signals must connect the appropriate pins of all agents on the intel ? celeron ? processor system bus. the a[31:24]# signals are parity-protected by the ap1# parity signal, and the a[23:3]# signals are parity-protected by the ap0# parity signal. on the active-to-inactive transition of reset#, the processors sample the a[31:3]# pins to determine their power-on configuration. see the pentium ? ii processor developer?s manual (order number 243502) for details. a20m# i if the a20m# (address-20 mask) input signal is asserted, the intel celeron processor masks physical address bit 20 (a20#) before looking up a line in any internal cache and before driving a read/write transaction on the bus. asserting a20m# emulates the 8086 processor's address wrap-around at the 1 mb boundary. assertion of a20m# is only supported in real mode. a20m# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. ads# i/o the ads# (address strobe) signal is asserted to indicate the validity of the transaction address on the a[31:3]# pins. all bus agents observe the ads# activation to begin parity checking, protocol checking, address decode, internal snoop, or deferred reply id match operations associated with the new transaction. this signal must connect the appropriate pins on all intel celeron processor system bus agents. bclk i the bclk (bus clock) signal determines the bus frequency. all intel celeron processor system bus agents must receive this signal to drive their outputs and latch their inputs on the bclk rising edge. all external timing parameters are specified with respect to the bclk signal. bnr# i/o the bnr# (block next request) signal is used to assert a bus stall by any bus agent who is unable to accept new bus transactions. during a bus stall, the current bus owner cannot issue any new transactions. since multiple agents might need to request a bus stall at the same time, bnr# is a wire-or signal which must connect the appropriate pins of all intel celeron processor system bus agents. in order to avoid wire-or glitches associated with simultaneous edge transitions driven by multiple drivers, bnr# is activated on specific clock edges and sampled on specific clock edges. bp[3:2]# i/o the bp[3:2]# (breakpoint) signals are outputs from the processor that indicate the status of breakpoints. bpm[1:0]# i/o the bpm[1:0]# (breakpoint monitor) signals are breakpoint and performance monitor signals. they are outputs from the processor which indicate the status of breakpoints and programmable counters used for monitoring processor performance.
datasheet 121 intel ? celeron ? processor up to 1.10 ghz bpri# i the bpri# (bus priority request) signal is used to arbitrate for ownership of the intel celeron processor system bus. it must connect the appropriate pins of all intel celeron processor system bus agents. observing bpri# active (as asserted by the priority agent) causes all other agents to stop issuing new requests, unless such requests are part of an ongoing locked operation. the priority agent keeps bpri# asserted until all of its requests are completed, then releases the bus by deasserting bpri#. bsel[1:0] i/o these signals are used to select the system bus frequency. the frequency is determined by the processor(s), chipset, and frequency synthesizer capabilities. all system bus agents must operate at the same frequency . individual processors will only operate at their specified front side bus (fsb) frequency. on motherboards which support operation at either 66 mhz or 100 mhz, a bsel[1:0] = ?x1? will select a 100 mhz system bus frequency and a bsel[1:0] = ?x0? will select a 66 mhz system bus frequency. these signals must be pulled up to 2.5 v or 3.3 v with 1 k ? resistor and provided as a frequency selection signal to the clock driver/synthesizer. see section 2.7.2 for implementation examples. note: bsel1 is not used by the celeron processor. br0# i/o the br0# (bus request) pin drives the breq[0]# signal in the system. during power-up configuration, the central agent asserts the breq0# bus signal in the system to assign the symmetric agent id to the processor. the processor samples it?s br0# pin on the active-to-inactive transition of reset# to obtain it?s symmetric agent id. the processor asserts br0# to request the system bus. cpupres# (ppga, fc-pga/ fc-pga2 only) o the cpupres# signal provides the ability for a system board to detect the presence of a processor. this pin is a ground on the processor indicating to the system that a processor is installed. combined with the vid combination of vid[3:0]= 1111 (see section 2.5 ), a system can determine if a socket is occupied, and whether a processor core is present. see the table below for states and values for determining the presence of a device. d[63:0]# i/o the d[63:0]# (data) signals are the data signals. these signals provide a 64-bit data path between the intel celeron processor system bus agents, and must connect the appropriate pins on all such agents. the data driver asserts drdy# to indicate a valid data transfer. dbsy# i/o the dbsy# (data bus busy) signal is asserted by the agent responsible for driving data on the intel celeron processor system bus to indicate that the data bus is in use. the data bus is released after dbsy# is deasserted. this signal must connect the appropriate pins on all intel celeron processor system bus agents. defer# i the defer# signal is asserted by an agent to indicate that a transaction cannot be guaranteed in-order completion. assertion of defer# is normally the responsibility of the addressed memory or i/o agent. this signal must connect the appropriate pins of all intel celeron processor system bus agents. drdy# i/o the drdy# (data ready) signal is asserted by the data driver on each data transfer, indicating valid data on the data bus. in a multicycle data transfer, drdy# may be deasserted to insert idle clocks. this signal must connect the appropriate pins of all intel celeron processor system bus agents. table 59. alphabetical signal reference (sheet 2 of 7) signal type description pga370 socket occupation truth table signal value status cpupres# vid[3:0] 0 anything other than ?1111? processor core installed in the pga370 socket. cpupres# vid[3:0] 1 any value pga370 socket not occupied.
122 datasheet intel ? celeron ? processor up to 1.10 ghz edgctrl i the edgctrl input provides agtl+ edge control and should be pulled up to v cc core with a 51 ? 5% resistor. note: this signal is not used on the fc-pga/fc-pga2 packages. emi (s.e.p.p. only) i emi pins should be connected to motherboard ground and/or to chassis ground through zero ohm (0 ? ) resistors. the zero ohm resistors should be placed in close proximity to the intel celeron processor connector. the path to chassis ground should be short in length and have a low impedance. these pins are used for emi management purposes. ferr# o the ferr# (floating-point error) signal is asserted when the processor detects an unmasked floating-point error. ferr# is similar to the error# signal on the intel 387 coprocessor, and is included for compatibility with systems using ms- dos*-type floating-point error reporting. flush# i when the flush# input signal is asserted, the processor writes back all data in the modified state from the internal cache and invalidates all internal cache lines. at the completion of this operation, the processor issues a flush acknowledge transaction. the processor does not cache any new data while the flush# signal remains asserted. flush# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. on the active-to-inactive transition of reset#, the processor samples flush# to determine its power-on configuration. see pentium ? pro family developer?s manual, volume 1: specifications (order number 242690) for details. hit#, hitm# i/o the hit# (snoop hit) and hitm# (hit modified) signals convey transaction snoop operation results, and must connect the appropriate pins of all intel celeron processor system bus agents. any such agent may assert both hit# and hitm# together to indicate that it requires a snoop stall, which can be continued by reasserting hit# and hitm# together. ierr# o the ierr# (internal error) signal is asserted by a processor as the result of an internal error. assertion of ierr# is usually accompanied by a shutdown transaction on the intel celeron processor system bus. this transaction may optionally be converted to an external error signal (e.g., nmi) by system core logic. the processor will keep ierr# asserted until the assertion of reset#, binit#, or init#. ignne# i the ignne# (ignore numeric error) signal is asserted to force the processor to ignore a numeric error and continue to execute noncontrol floating-point instructions. if ignne# is deasserted, the processor generates an exception on a noncontrol floating-point instruction if a previous floating-point instruction caused an error. ignne# has no effect when the ne bit in control register 0 is set. ignne# is an asynchronous signal. however, to ensure recognition of this signal following an i/o write instruction, it must be valid along with the trdy# assertion of the corresponding i/o write bus transaction. init# i the init# (initialization) signal, when asserted, resets integer registers inside all processors without affecting their internal (l1) caches or floating-point registers. each processor then begins execution at the power-on reset vector configured during power-on configuration. the processor continues to handle snoop requests during init# assertion. init# is an asynchronous signal and must connect the appropriate pins of all bus agents. if init# is sampled active on the active to inactive transition of reset#, then the processor executes its built-in self-test (bist). table 59. alphabetical signal reference (sheet 3 of 7) signal type description
datasheet 123 intel ? celeron ? processor up to 1.10 ghz lint[1:0] i the lint[1:0] (local apic interrupt) signals must connect the appropriate pins of all apic bus agents, including all processors and the core logic or i/o apic component. when the apic is disabled, the lint0 signal becomes intr, a maskable interrupt request signal, and lint1 becomes nmi, a nonmaskable interrupt. intr and nmi are backward compatible with the signals of those names on the pentium ? processor. both signals are asynchronous. both of these signals must be software configured via bios programming of the apic register space to be used either as nmi/intr or lint[1:0]. because the apic is enabled by default after reset, operation of these pins as lint[1:0] is the default configuration. lock# i/o the lock# signal indicates to the system that a transaction must occur atomically. this signal must connect the appropriate pins of all system bus agents. for a locked sequence of transactions, lock# is asserted from the beginning of the first transaction end of the last transaction. when the priority agent asserts bpri# to arbitrate for ownership of the system bus, it will wait until it observes lock# deasserted. this enables symmetric agents to retain ownership of the system bus throughout the bus locked operation and ensure the atomicity of lock. picclk i the picclk (apic clock) signal is an input clock to the processor and core logic or i/o apic which is required for operation of all processors, core logic, and i/o apic components on the apic bus. picd[1:0] i/o the picd[1:0] (apic data) signals are used for bidirectional serial message passing on the apic bus, and must connect the appropriate pins of the intel celeron processor for proper initialization. pll1, pll2 (pga packages only) i all intel celeron processors have internal analog pll clock generators that require quiet power supplies. pll1 and pll2 are inputs to the internal pll and should be connected to v cc core through a low-pass filter that minimizes jitter. see the platform design guide for implementation details. prdy# o the prdy (probe ready) signal is a processor output used by debug tools to determine processor debug readiness. preq# i the preq# (probe request) signal is used by debug tools to request debug operation of the processors. pwrgood i the pwrgood (power good) signal is a 2.5 v tolerant processor input. the processor requires this signal to be a clean indication that the clocks and power supplies (v cc core , etc.) are stable and within their specifications. clean implies that the signal will remain low (capable of sinking leakage current), without glitches, from the time that the power supplies are turned on until they come within specification. the signal must then transition monotonically to a high (2.5 v) state. figure 43 illustrates the relationship of pwrgood to other system signals. pwrgood can be driven inactive at any time, but clocks and power must again be stable before a subsequent rising edge of pwrgood. it must also meet the minimum pulse width specification in table 17 and table 18 , and be followed by a 1ms reset# pulse. the pwrgood signal must be supplied to the processor; it is used to protect internal circuits against voltage sequencing issues. it should be driven high throughout boundary scan operation. pwrgood relationship at power-on table 59. alphabetical signal reference (sheet 4 of 7) signal type description bclk pwrgood reset# 1 ms vcc core , v ref
124 datasheet intel ? celeron ? processor up to 1.10 ghz req[4:0]# i/o the req[4:0]# (request command) signals must connect the appropriate pins of all processor system bus agents. they are asserted by the current bus owner over two clock cycles to define the currently active transaction type. reset# i asserting the reset# signal resets the processor to a known state and invalidates the l1 cache without writing back any of the contents. reset# must stay active for at least one millisecond after v cc core and clk have reached their proper specifications. on observing active reset#, all system bus agents will deassert their outputs within two clocks. a number of bus signals are sampled at the active-to-inactive transition of reset# for power-on configuration. these configuration options are described in the pentium ? pro family developer?s manual, volume 1: specifications (order number 242690). the processor may have its outputs tristated via power-on configuration. otherwise, if init# is sampled active during the active-to-inactive transition of reset#, the processor will execute its built-in self-test (bist). whether or not bist is executed, the processor will begin program execution at the power on reset vector (default 0_ffff_fff0h). reset# must connect the appropriate pins of all processor system bus agents. rs[2:0]# i the rs[2:0]# (response status) signals are driven by the response agent (the agent responsible for completion of the current transaction), and must connect the appropriate pins of all processor system bus agents. rttctrl i the rttctrl input signal provides agtl+ termination control. the celeron fc-pga/fc-pga2 processor samples this input to sense the presence of motherboard agtl+ termination. see the platform design guide for implementation details. slewctrl i the slewctrl input signal provides agtl+ slew rate control. the celeron fc-pga/fc-pga2 processor samples this input to determine the slew rate for agtl+ signals when it is the driving agent. see the platform design guide for implementation details. slotocc# (s.e.p.p. only) o slotocc# is defined to allow a system design to detect the presence of a terminator card or processor in a sc242 connector. this pin is not a signal; rather, it is a short to v ss . combined with the vid combination of vid[4:0]= 11111 (see section 2.5 ), a system can determine if a sc242 connector is occupied, and whether a processor core is present. the states and values for determining the type of cartridge in the sc242 connector is shown below. slp# i the slp# (sleep) signal, when asserted in stop-grant state, causes processors to enter the sleep state. during sleep state, the processor stops providing internal clock signals to all units, leaving only the phase-locked loop (pll) still operating. processors in this state will not recognize snoops or interrupts. the processor will recognize only assertions of the slp#, stpclk#, and reset# signals while in sleep state. if slp# is deasserted, the processor exits sleep state and returns to stop-grant state, restarting its internal clock signals to the bus and apic processor core units. table 59. alphabetical signal reference (sheet 5 of 7) signal type description sc242 occupation truth table signal value status slotocc# vid[4:0] 0 anything other than ?11111? processor with core in sc242 connector. slotocc# vid[4:0] 0 11111 terminator cartridge in sc242 connector (i.e., no core present). slotocc# vid[4:0] 1 any value sc242 connector not occupied.
datasheet 125 intel ? celeron ? processor up to 1.10 ghz smi# i the smi# (system management interrupt) signal is asserted asynchronously by system logic. on accepting a system management interrupt, processors save the current state and enter system management mode (smm). an smi acknowledge transaction is issued, and the processor begins program execution from the smm handler. stpclk# i the stpclk# (stop clock) signal, when asserted, causes processors to enter a low power stop-grant state. the processor issues a stop-grant acknowledge transaction, and stops providing internal clock signals to all processor core units except the bus and apic units. the processor continues to snoop bus transactions and may latch interrupts while in stop-grant state. when stpclk# is deasserted, the processor restarts its internal clock to all units, resumes execution, and services any pending interrupt. the assertion of stpclk# has no effect on the bus clock; stpclk# is an asynchronous input. tck i the tck (test clock) signal provides the clock input for the intel celeron processor test access port. tdi i the tdi (test data in) signal transfers serial test data into the processor. tdi provides the serial input needed for jtag specification support. tdo o the tdo (test data out) signal transfers serial test data out of the processor. tdo provides the serial output needed for jtag specification support. testhi (s.e.p.p. only) i refer to section 2.6 for implementation details. thermdn o thermal diode p-n junction. used to calculate core temperature. see section 4.1 . thermdp i thermal diode p-n junction. used to calculate core temperature. see section 4.1 . thermtrip# o the processor protects itself from catastrophic overheating by use of an internal thermal sensor. this sensor is set well above the normal operating temperature to ensure that there are no false trips. the processor will stop all execution when the junction temperature exceeds approximately 135 c. this is signaled to the system by the thermtrip# (thermal trip) pin. once activated, the signal remains latched, and the processor stopped, until reset# goes active. there is no hysteresis built into the thermal sensor itself; as long as the die temperature drops below the trip level, a reset# pulse will reset the processor and execution will continue. if the temperature has not dropped below the trip level, the processor will reassert thermtrip# and remain stopped. the system designer should not act upon thermtrip# until after the reset# input is deasserted. until this time, the thermtrip# is indeterminate. tms i the tms (test mode select) signal is a jtag specification support signal used by debug tools. trdy# i the trdy# (target ready) signal is asserted by the target to indicate that it is ready to receive a write or implicit writeback data transfer. trdy# must connect the appropriate pins of all system bus agents. trst# i the trst# (test reset) signal resets the test access port (tap) logic. intel celeron processors require this signal to be driven low during power on reset. a 680 ohm resistor is the suggested value for a pull down resistor on trst#. v cc 1.5 (pga packages only) i the v cc cmos pin provides the cmos voltage for use by the platform. the 2.5 v must be provided to the v cc 2.5 input and 1.5 v must be provided to the v cc 1.5 input. the processor re-routes the 1.5 v input to the v cc cmos output via the package. the supply for v cc 1.5 must be the same one used to supply v tt . v cc 2.5 (pga packages only) i the v cc cmos pin provides the cmos voltage for use by the platform. the 2.5 v must be provided to the v cc 2.5 input and 1.5 v must be provided to the v cc 1.5 input. the processor re-routes the 2.5 v input to the v cc cmos output via the package. v cc cmos (pga packages only) o the v cc cmos pin provides the cmos voltage for use by the platform. the 2.5 v must be provided to the v cc 2.5 input and 1.5 v must be provided to the v cc 1.5 input. table 59. alphabetical signal reference (sheet 6 of 7) signal type description
126 datasheet intel ? celeron ? processor up to 1.10 ghz 7.1 signal summaries table 60 through table 63 list attributes of the celeron processor output, input, and i/o signals. v core det (pga packages only) o the v core det signal will float for 2.0 v core processors and will be grounded for the celeron ? fc-pga/fc-pga2 processor with a 1.5v core voltage. vid[4:0] (s.e.p.p.) vid[3:0] (pga packages only) o the vid (voltage id) pins can be used to support automatic selection of power supply voltages. these pins are not signals, but are either an open circuit or a short circuit to v ss on the processor. the combination of opens and shorts defines the voltage required by the processor. the vid pins are needed to cleanly support voltage specification variations on intel celeron processors. see table 2 for definitions of these pins. the power supply must supply the voltage that is requested by these pins, or disable itself. v ref [7:0] (pga packages only) i these input signals are used by the agtl+ inputs as a reference voltage. agtl+ inputs are differential receivers and will use this voltage to determine whether the signal is a logic high or logic low. for the fc-pga/fc-pga2 packages, v ref is typically 2/3 of v tt table 59. alphabetical signal reference (sheet 7 of 7) signal type description table 60. output signals name active level clock signal group cpupres# (pga packages only) low asynch power/other ferr# low asynch cmos output ierr# low asynch cmos output prdy# low bclk agtl+ output slotocc# (s.e.p.p. only) low asynch power/other tdo high tck tap output thermdn n/a asynch power/other thermtrip# low asynch cmos output v core det (pga packages only) high asynch power/other vid[4:0] (s.e.p.p.) vid[3:0] (pga packages) high asynch power/other
datasheet 127 intel ? celeron ? processor up to 1.10 ghz note: 1. synchronous assertion with active trdy# ensures synchronization. table 61. input signals name active level clock signal group qualified a20m# low asynch cmos input always 1 bpri# low bclk agtl+ input always bclk high ? system bus clock always defer# low bclk agtl+ input always flush# low asynch cmos input always 1 ignne# low asynch cmos input always 1 init# low asynch cmos input always 1 intr high asynch cmos input apic disabled mode lint[1:0] high asynch cmos input apic enabled mode nmi high asynch cmos input apic disabled mode picclk high ? apic clock always preq# low asynch cmos input always pwrgood high asynch cmos input always reset# low bclk agtl+ input always rs[2:0]# low bclk agtl+ input always rttctrl n/a asynch power/other slewctrl n/a asynch power/other slp# low asynch cmos input during stop-grant state smi# low asynch cmos input stpclk# low asynch cmos input tck high ? tap input tdi high tck tap input testhi (s.e.p.p. only) high asynch power/other always thermdp n/a asynch power/other tms high tck tap input trst# low asynch tap input trdy# low bclk agtl+ input
128 datasheet intel ? celeron ? processor up to 1.10 ghz table 62. input/output signals (single driver) name active level clock signal group qualified bsel[1:0] low asynch power/other always bp[3:2] low bclk agtl+ i/o always br0# low bclk agtl+i/o always a[31:3]# low bclk agtl+ i/o ads#, ads#+1 ads# low bclk agtl+ i/o always bpm[1:0]# low bclk agtl+ i/o always d[63:0]# low bclk agtl+ i/o drdy# dbsy# low bclk agtl+ i/o always drdy# low bclk agtl+ i/o always lock# low bclk agtl+ i/o always req[4:0]# low bclk agtl+ i/o ads#, ads#+1 table 63. input/output signals (multiple driver) name active level clock signal group qualified bnr# low bclk agtl+ i/o always hit# low bclk agtl+ i/o always hitm# low bclk agtl+ i/o always picd[1:0] high picclk apic i/o always

▲Up To Search▲

Price & Availability of 243658-020

	To Download 243658-020 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .